1. Introduction
This user manual provides important information for the safe and efficient operation of your ISCOOTER W10 Electric Scooter. Please read it carefully before use and keep it for future reference. Illustrations of the product, accessories, and user interface are for reference purposes only; actual product and functions may vary due to product enhancements.
Important Safety Disclaimer
Please be aware of potential fire risks and strictly follow the instruction manual for charging and storage. When using the product, always wear appropriate protective equipment and fully comply with all applicable local laws and regulations.
2. Package Contents
Ensure all items listed below are present in your package. If any items are missing or damaged, please contact customer support.
Diagram of the ISCOOTER W10 Electric Scooter package contents, including the scooter, rear fender, tools, charger, and user manual.
- (1) Electric Scooter
- (2) Rear Fender
- (3) Tool Kit
- (4) Charger
- (5) User Manual + Safety Instructions
3. Product Overview
Familiarize yourself with the main components of your ISCOOTER W10 Electric Scooter.
Detailed product diagram highlighting key components such as Brake Lever, Display Screen, Throttle, Shoulder Strap, Control Box, Folding Mechanism, Headlight, Charging Port, Pedal, Taillight + Brake Light + Turn Signals, Rear Fender, Front Suspension, Side Support, and Rear Shock Absorber.
- Display
- Brake Levers
- Control Unit
- Throttle
- Carrying Strap
- Folding Mechanism
- Headlight
- Charging Port
- Front Suspension
- Kickstand
- Footrest
- Taillight + Brake Light + Turn Signals
- Rear Shock
- Rear Fender
4. Assembly
Follow these steps to assemble your scooter before first use.
4.1 Unfolding the Stem
Step-by-step illustration of unfolding the scooter's main stem. (1) Lift the stem upwards. (2a) Rotate the locking mechanism to release. (2b) Push the locking pin in to secure the stem in the upright position.
- Lift the scooter stem upwards until it clicks into place.
- Secure the folding mechanism by rotating the safety lock.
4.2 Handlebar Installation
Illustration of attaching the handlebar to the stem using screws and an Allen key.
- Attach the handlebar to the top of the stem.
- Secure it using the provided screws and tool. Ensure it is firmly tightened.
4.3 Adjusting Stem Height and Installing Rear Fender
Illustration of adjusting the stem height using the locking pin and installing the rear fender with screws.
- Adjust the stem to your desired height by pressing the locking pin and sliding the stem. Release the pin to lock it in place.
- Install the rear fender using the provided screws and tool.
5. Scooter Folding
To fold your scooter for storage or transport, follow these steps:
Illustration of the scooter folding process. (1) Rotate the safety lock to release the stem. (2) Push the locking pin to allow the stem to fold down. (3) Fold the stem towards the deck. (4) Secure the handlebar to the rear fender for compact storage.
- Rotate the safety lock on the folding mechanism to release the stem.
- Push the locking pin to allow the stem to fold downwards.
- Fold the stem towards the scooter deck.
- Secure the handlebar to the rear fender to keep the scooter in a compact, folded position.
6. Operating Your Scooter
6.1 Display Overview
The high-definition smart display provides real-time information about your ride. Even in bright sunlight, speed, battery level, and mileage remain perfectly visible.
Detailed view of the scooter's display, showing indicators for turn signals, real-time speed/error codes, headlights, brakes, scooter anti-theft (via app), engine overheat alarm, connected app, riding modes, trip distance/total distance, cruise control, and battery level.
- Turn signals
- Real-time speed / Error codes
- Headlight
- Brakes applied
- Scooter anti-theft (via the app)
- Engine overheat alarm
- Connected app
- Riding modes (SPORT, RACE, ECO)
- TRIP: Trip distance / ODO: Total distance
- Cruise control mode
- Battery level
6.2 Basic Operations
Control unit diagram showing the Horn Switch, Headlight Switch, 'S' Button, Power Button, 'M' Button, and Turn Signal Switch.
- Power ON/OFF Scooter: Press and hold the Power button.
- Turn ON/OFF Lights: Press the Headlight switch to turn on/off the headlight and the taillight simultaneously.
- Switch between TRIP and ODO: Double-press the "S" button.
- Select Riding Mode: Press the "S" button to cycle through modes.
- Imperial/Metric Units: Press the "M" button to switch between units.
NOTE: The scooter will automatically power off after 10 minutes of inactivity.
6.3 Speed Modes
The scooter features intelligent multi-level adjustment with four speeds to meet different needs: commuting, leisure, and sport.
Table illustrating the start and shift speeds for Ride Mode, Eco Mode, R Mode, and S Mode, along with instructions to deactivate the speed limiter and change speeds.
| Riding Mode | Max Speed (European) | Max Speed (North American) |
|---|---|---|
| Ride Mode (Start Speed) | 6 km/h | 9 mph (15 km/h) |
| ECO Mode | 10 km/h | 15 mph (25 km/h) |
| RACE Mode | 15 km/h | 21 mph (35 km/h) |
| SPORT Mode | 25 km/h | 32 mph (50 km/h) |
After starting, hold down the brake lever and press the power button 5 times to deactivate the speed limiter. Press the 'S' button to change speeds.
7. Settings
You can adjust various settings on your scooter's display. The main settings are:
- P1: Start Mode (P10 for zero start, P11 for non-zero start)
- P2: Cruise Control (P20 for disabling, P21 for enabling)
- P4: Odometer Resetting
To access and modify settings:
- To enter the settings menu, hold the "Power" and "Horn" buttons simultaneously.
- Press the "Horn" button to cycle through P1, P2, and P4.
- When selecting P1 or P2:
- Press the "M" button to select P10 or P20.
- Press the "S" button to select P11 or P21.
- When selecting P4, press and hold the "M" button to reset the odometer (total distance) to zero.
- Press the "Horn" button to switch to the next setting item (changed settings will be saved).
- To save all changes and return to the home screen, press the "Power" and "Horn" buttons simultaneously, or wait 5 seconds for automatic exit.
8. About Charging
Proper charging practices ensure the longevity and safety of your scooter's battery.
- Red charger indicator: Charging in progress.
- Green charger indicator: Battery is fully charged.
- The scooter cannot be powered on while charging.
- Do not overcharge the scooter.
- Keep the charging port cover closed when not charging to prevent dust and moisture ingress.
- Only use the original charger provided with your scooter to charge the battery.
9. Maintenance
Regular maintenance helps ensure the performance and safety of your scooter.
- Tire Pressure: Regularly check and maintain the correct tire pressure for optimal performance and to reduce puncture risk.
- Cleaning: Wipe down the scooter with a damp cloth. Do not use high-pressure water or immerse the scooter in water.
- Brakes: Periodically check the brake levers and disc brakes for proper function and wear. Adjust or replace components as needed.
- Fasteners: Ensure all screws and bolts are securely tightened before each ride.
- Storage: Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
10. Troubleshooting (Error Codes)
If an error code appears on your display, refer to the table below. If the issue persists or you encounter other codes, please contact support.
| Error Code | Meaning |
|---|---|
| E10 | Communication Fault |
| E14 | Throttle Fault |
| E15 | Brake Lever Fault |
| E16 | Motor Hall Sensor Fault |
| E50 | Over-Voltage Protection |
11. Specifications
Detailed technical specifications for the ISCOOTER W10 Electric Scooter.
Comprehensive specifications table for the W10 Electric Scooter, including dimensions, weight, battery, motor, range, speed, and charging details.
| Feature | Specification |
|---|---|
| Model | W10 |
| Wheels | Rear-wheel drive, 10-inch tubeless all-terrain tires |
| Battery | 48 V 15 Ah |
| Motor Power | 1200 W |
| Range | 32-38 miles (50-60 km)* |
| Maximum Speed | 32 mph (50 km/h) |
| Maximum Incline Angle | 25° |
| Unfolded Dimensions (L x W x H) | 46.7 x 25.6 x 49.2 in (118.5 x 65 x 125 cm) |
| Folded Dimensions (L x W x H) | 46.7 x 25.6 x 21.9 in (118.5 x 65 x 55.5 cm) |
| Net Weight (Scooter only) | 54.7 lbs (24.8 kg) |
| Gross Weight | 26 kg |
| Maximum Load Capacity | 330 lbs (150 kg)* |
| Recommended Age | 14+ |
| Charger Input & Output | AC 100-240 V, 50/60 Hz; DC 54.6 V, 2 A |
| Charging Time | 6-8 Hours |
| Waterproof Rating | IPX4 |
*Actual range, maximum speed, and maximum gradient are affected by weight, terrain, temperature, wind speed, tire pressure, riding habits, and other factors. For the best riding experience, 70% of the maximum load is recommended.
12. User Tips
- Easy Setup: The scooter is designed for straightforward assembly, making it quick to get started.
- Secure Folding: When folded, ensure the steering column is securely locked to prevent accidental unfolding during transport.
- App Integration: Utilize the Voltix App for additional features like checking battery status, locking the scooter, and adjusting settings.
- Original Charger: Always use the provided original charger for optimal battery health and safety.
13. Compliance and Support
13.1 FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not explicitly approved by the manufacturer could void your authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer or an experienced radio/TV technician for help.
13.2 IC Caution (Canada)
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
13.3 Disposal of Electrical and Electronic Equipment
The crossed-out garbage can symbol indicates that these devices must be disposed of separately from unsorted municipal waste. Disposal via the residual waste bin or yellow bin is prohibited. If products contain batteries or rechargeable batteries that are not permanently installed, they must be removed before disposal and disposed of separately as a battery.
13.4 Manufacturer and Support Information
Manufacturer: Dongguan Yicheng Shengda Information Technology Co., Ltd.
Address: Room 301, No. 28, Houshan Road, Nanchongkou, Humen Town, Dongguan City, Guangdong Province, China
E-mail: support@e-scootworld.com
EC Representative: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
Address: CASTELLANA 9144, 28046 Madrid
E-mail: compliance.gavimosa@outlook.com
Contact: Jorge Wilson
Tel: +34 688185858
A detailed user manual (PDF) is available for download here.
You can also download the "Voltix" App for a digital manual, step-by-step setup videos, FAQs & troubleshooting, and electronic lock features.