MOPECT 9" Universal 2DIN Car Stereo

Contents

MOPECT 9-inch Universal 2DIN Car Stereo Multimedia System

Model: 9" Universal 2DIN Car Stereo

Brand: MOPECT

1. Introduction and Safety Warnings

This manual provides essential information for the installation, operation, and maintenance of your MOPECT 9-inch Universal 2DIN Car Stereo. Please read all instructions carefully before use to ensure proper functioning and safety.

Important Tips and Warnings

  • This machine is designed for a vehicle 12V power supply system (grounding wire is required). Do not install this machine in a 24V vehicle, as it will cause damage.
  • Do not repair the power fuse without professional guidance. Improper use of the fuse can cause damage to the machine or cause a fire.
  • To avoid violating traffic rules, drivers must not watch videos while driving or operate the machine in a way that causes distraction.
  • For safety and to ensure normal use, please have professionals install, disassemble, or repair the machine to prevent damage or accidents.
  • Avoid placing this product in a humid environment or exposing it to water to prevent electric shock or other damage.
  • NOTE: To prevent burning out the machine, do not energize it until you have connected the power cord correctly!

2. Package Contents

Please check the package for the following items:

  • 1 x 2 DIN Car Stereo Unit
  • 1 x Bracket & Screws
  • 1 x GPS Antenna
  • 1 x Universal Power Cable
  • 1 x ISO Power Cable
  • 1 x RCA Cable
  • 1 x Backup Camera Input Cable
  • 2 x USB Cables (4/6pin)
  • 1 x User Manual (this document, also available as PDF download)

Optional accessories (may be included depending on your purchase):

  • 1 x AHD Rear View Camera
  • 1 x DAB BOX
  • 1 x Dash Camera
Included accessories for the MOPECT car stereo
Image: MOPECT car stereo unit and included accessories.

3. Installation

3.1 Pre-Installation Test

Before full installation, perform a quick test to confirm the device is working correctly:

  1. Combine the red and yellow wires of the car stereo and connect them to the positive pole of a 12V battery.
  2. Connect the black wire to the negative pole of the battery.
  3. After 2 seconds, check if the car stereo screen lights up. If it does, the car stereo is functioning properly.

3.2 Mounting Methods

There are three common ways to install the head unit. Choose the method that best suits your vehicle:

  • Screwfixed Installation: Securing the unit with screws.
  • Card Position Fixed Installation: Using the vehicle's existing card slot for mounting.
  • Special Frame Fixed Installation: Utilizing a custom frame for a seamless fit.
Diagram showing three car stereo installation methods
Image: Three common installation methods for car stereos.

3.3 Wiring Diagram

Refer to the following diagrams for proper wiring connections. It is recommended to have this done by a car audio professional.

3.3.1 Main Harness Connections

Wiring diagram for the back of the car stereo host device
Image: Special design back of the host device with wiring labels. Connections include KEY1, REVERSE, BRAKE CTL, AUTO ANT, Front/Rear speakers (FR-, FR+, RR-, RR+, FL-, FL+, RL-, RL+), KEY2, ACC, Battery +12V, Battery GND, USB1, USB2, Camera input, GPS Antenna, and Radio Antenna. Canbus interface is optional.

Key Connections:

  • KEY1, KEY2: Steering Wheel Control inputs.
  • REVERSE: Connect to the reverse light signal for automatic camera display.
  • BRAKE CTL: Brake control wire.
  • ACC: Accessory power (switched 12V).
  • B+ (Battery +12V): Constant 12V power.
  • GND (Battery GND): Ground connection.
  • FR+/FR-, FL+/FL-, RR+/RR-, RL+/RL-: Speaker outputs (Front Right, Front Left, Rear Right, Rear Left).
  • USB1, USB2: USB ports for data and accessories.
  • Camera input: Video input for rear view camera.
  • GPS Antenna: Connect the included GPS antenna.
  • Radio Antenna: Connect your vehicle's radio antenna.

3.3.2 Back Interface Diagram

This diagram shows the physical layout of the ports on the back of the unit:

  1. Power Cable
  2. RCA Input/Output
  3. 8pin BREAK1.BACK _CVBSIFI/BT
  4. 2USB Cable
  5. Camera Input
  6. Radio antenna
  7. GPS Antenna

3.3.3 Rear View Camera Wiring (Optional)

If you have an optional rear view camera, follow this wiring guide:

Wiring diagram for AHD Reversing camera
Image: AHD Reversing camera wiring diagram. Connect the reversing trigger line to the reversing line in the power harness (Back A6). Connect the red wire of the camera power cable to the positive pole of the reverse light cable, and the black wire to GND. The video cable connects the camera to the head unit's camera input.

NOTE: Whether you are using a rear view camera or not, please connect the rear view wire. Otherwise, your WiFi and Bluetooth signals may be affected.

4. Operation

4.1 Machine-Host Controls

Symbol Operations & Controls
MICBuilt-in microphone hole
RSTReset (press with a sharp object)
Power ButtonPress and hold for 3 seconds to power off. Short press repeatedly to mute or unmute.
Home IconTo main menu
Back IconReturn to the previous interface
Volume UpPress or hold repeatedly to increase volume
Volume DownPress or hold repeatedly to decrease volume

4.2 On-Screen Interface

The main interface may vary slightly between products. Refer to the specific product for exact details.

Main screen of the MOPECT 9-inch Android 15 Car Radio
Image: Main screen of the MOPECT 9-inch Android 15 Car Radio, showing various app icons like TikTok, Spotify, WhatsApp, Maps, and more. Features GPS+WiFi, 6+128GB RAM+ROM, Wireless CarPlay, Wireless Android Auto, DAB+, and AHD camera support.

4.2.1 Main Interface Icons

Icon Name Operations
Menu IconMain menuTouch to switch screen to main menu
Hide Shortcut IconHide shortcut menuTouch to hide the shortcut menu button area
Backstage IconBackstageTouch to show all programs running in the background
Return IconReturnTouch to switch screens to return to previous screen
Settings IconSettingTouch to enter settings
Applications IconApplicationTouch to enter More App Interface

4.2.2 Drop-Down List Icons

Icon Name Operations
Wi-Fi IconWi-FiTurn on/off Wi-Fi
Bluetooth IconBluetoothTurn on/off Bluetooth
Screen Off IconScreen offOpen/Close Screen
Screenshot IconScreenshotTouch to take a screenshot
Car Settings IconCar settingTouch to enter Car settings
Clean-up IconClean-upTouch to clean
Video Out IconVideo outTouch to set Video out
Optical IconOPTICALTurn on/off OPTICAL

4.2.3 APP Icons

The following are common APP icons. Note that some apps may require additional accessories to function fully.

Icon Name Operations
BT IconBTTouch to enter Bluetooth
ESSGOO Voice IconESSGOO VoiceTouch to enter smart voice settings
ESSGOO+ IconESSGOO +Touch to enter the intelligent voice software
DAB+ IconDAB+Touch to enter DAB+
HERE WeGo IconHERE WeGoTouch to enter offline map
Car Set IconCar setTouch to enter car settings
Navigation IconNavigationTouch to enter navigation
Maps IconMapsTouch to enter Google Maps online
Phonelink/TIMA IconPhonelink/TIMATouch to connect to mobile phone
Video IconVideoTouch to enter video playback
File Manager IconFilemanagerTouch to enter file management

4.3 Main Functions and Usage

4.3.1 Intelligent Voice - ESSGOO+ (Optional)

Activate the intelligent voice assistant by saying "Hey ESSGOO". You can use specific voice commands for navigation, music playback, and making calls. Log in with your Google email or Facebook account to access product introductions, operation videos, and more.

The device supports both wired and wireless Mirror Link functionality (Phonelink). The specific app for mirror link may vary.

CarPlay and Android Auto interface on the car stereo
Image: CarPlay & Android Auto functionality, showing a smartphone connected to the car stereo display, indicating both wired and wireless connection options.

For Android USB (Wired Mirror Link):

  1. Use a USB cable to connect your mobile phone to the AVN unit and enable USB debug mode on your phone.
  2. Open the TIMA app and follow the prompts to complete the connection.

For Android WIFI (Wireless Mirror Link):

  1. Open your mobile phone's hotspot and select it in the list on the car stereo.
  2. Open the TIMA app. If needed, scan the QR code to download it.
  3. Click "Start immediately" from your mobile phone when the authorization dialog is displayed.

For iPhone WIFI (Wireless Mirror Link):

  1. Open your mobile phone's hotspot and select it in the list on the car stereo.
  2. Slide up on your iPhone and click the AirPlay mirror option.
Features: GPS Navigation, Bluetooth, WiFi, Mirror Link
Image: Four-panel display showing GPS Navigation, Bluetooth 4.1 chip, WiFi Function, and Mirror Link (Phonelink) in action.

4.3.3 Offline Map - HERE WeGo

To use the offline map feature, follow these steps:

  1. Power on the device and connect it to the internet via Wi-Fi.
  2. Find the "HERE WeGo" app in the main menu.
  3. Follow the app prompts to enter the main map page and find the options menu.
  4. Click "Use the app offline" and download your favorite map data for your country.
UI Interface and 9-inch IPS Display
Image: Shows the UI Interface with various settings and a 9-inch IPS Display with 1280x720 resolution and 1080P video playback capability.

4.3.4 Radio Function (FM/RDS)

The unit supports automatic and manual search for FM radio stations. You can drag station icons to rearrange your channel list.

AM/FM/RDS Radio interface
Image: AM/FM/RDS Radio interface, showing automatic and manual search functionality and frequency range (87.50 MHz to 108.00 MHz).

4.3.5 Steering Wheel Control (SWC)

The device supports steering wheel controls, allowing you to manage functions like volume, track skipping, and answering calls directly from your steering wheel. This feature requires proper wiring (KEY1, KEY2) and configuration in the unit's settings.

Steering Wheel Control and Button Color Adjustable features
Image: Top panel shows Steering Wheel Control (SWC) function with button mapping. Bottom panel shows the Button Color Adjustable feature for customizing the UI button colors.

4.3.6 Supported Additional Devices

The car stereo supports various additional devices, which may need to be purchased separately:

Device Connection Way
External MicrophoneRCA MIC Interface
DAB+USB
DVRUSB
OBDBluetooth
SubwooferRCA audio output or subwoofer interface
AmplifierRCA audio output interface
Video OutputUSB
U diskUSB

5. Specifications

Below are the technical parameters for the MOPECT 9-inch Universal 2DIN Car Stereo:

Category Parameter
SystemAndroid 15
Display Size9 Inch
Screen TypeIPS capacitive touch screen, 178° viewing angle
Resolution1024*600 (supports 1280*720, 768*1024, 800*1280 depending on model)
CPUCortex A53 1.3GHz*4 (8227L & MT8163 Chipset)
RAM6GB
ROM (Internal Storage)128GB
Max External Memory128G
Radio BandFM / RDS
Radio FrequencyFM 87.5M-108M
Bluetooth Version4.2
Output Power45W*4 (Mosfet output stage)
Voltage12 V
Item Weight1.2kg
Special FeaturesBuilt-In Speaker/Microphone, WiFi function, Built-in GPS, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control
Digital Media FormatMP3, FLAC, APE, WMA, WAV, AAC, AMR, AVI, ASF, MP4, MOV, MPGMPEG1/2/4, VOB, MKV, FLV, TS, WMV, RMVB, 3GP
OSD LanguageMulti-language support including English, German, French, Spanish, Italian, etc.
Rear Camera StandardCVBS
Factory Password8888 or 000000
Comparison table of MOPECT car stereo models and specifications
Image: Detailed comparison table of various MOPECT car stereo models (ES9/ES10, ES11, ES5/ES12, ES13, ES14, 9016A, 9088/9099) and their specifications, including System, Screen, Size, Resolution, RAM/ROM, Bluetooth, Internet, Core, GPU, Audio frequency, GPS, CarPlay & Android Auto, RDS/FM/SWC, Output power, USB, ChatGPT, Reversing Camera, Dashcam, and DAB support.

6. Troubleshooting

If you encounter issues with your car stereo, please refer to the following common problems and solutions:

  • Unit does not power on: Ensure all power cables (B+, ACC, GND) are correctly connected and receiving appropriate voltage. Recheck the pre-installation test steps.
  • No sound: Verify speaker wiring connections (FR, FL, RR, RL). Check volume levels and audio output settings. Ensure external amplifiers (if used) are powered and connected correctly.
  • No GPS signal: Ensure the GPS antenna is properly connected and placed in a location with a clear view of the sky (e.g., on the dashboard).
  • Bluetooth/WiFi issues: Ensure the rear view wire is connected, as it can affect wireless signals. Check the unit's settings to ensure Bluetooth/WiFi are enabled.
  • Rear view camera not displaying: Check the camera input connection and the reverse trigger line connection. Ensure the camera itself is powered.
  • Steering Wheel Controls not working: Verify KEY1 and KEY2 wiring. Access the car settings menu to configure and map the steering wheel buttons.
  • Screen frozen or unresponsive: Use a sharp object (like a pen tip) to press the RST (Reset) button on the unit.

7. User Tips

  • Regularly clean the touch screen with a soft, dry cloth to maintain clarity and responsiveness.
  • Keep the system software updated to ensure optimal performance and access to the latest features.
  • For best GPS performance, ensure the GPS antenna is not obstructed.
  • Explore the customizable button colors and UI settings to personalize your driving experience.

8. Warranty and Support

This product comes with a 1-Year Warranty from the date of purchase.

If you have any further questions, require technical assistance, or need to claim warranty service, please contact MOPECT customer support through your purchase platform. Product UI interface or functions may be modified and upgraded from time to time without notice. It is normal if the manual has some discrepancies due to software updates.

© 2024 MOPECT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.