Introduction
This manual provides essential information for the installation, operation, and maintenance of your Car Radio Stereo Player (Models JSD-530 and JSD-520). Designed for an enhanced in-car audio experience, this device features digital media playback, Bluetooth connectivity, and FM radio. Please read this manual thoroughly before use to ensure proper functionality and safety.
Safety Information and Warnings
- Hearing Safety: Consult a doctor before use if you have pre-existing hearing issues. Prolonged exposure to loud volumes may cause hearing damage.
- Secure Mounting: Ensure the device is securely mounted in your vehicle's dashboard to prevent it from becoming a projectile during sudden stops or accidents, which could cause distractions or injury while driving.
- Environmental Conditions: Keep the device dry and avoid exposure to moisture, water, or excessive humidity.
- Cleaning and Storage: For cleaning, wipe the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Store the device in a cool, dry place if removed from the vehicle for an extended period.
Setup and Installation
The Car Radio Stereo Player is designed for standard single-DIN car stereo slots. Professional installation is recommended for optimal performance and safety.
Quick Start Guide
- Power Connection: Connect the car radio stereo player to your vehicle's power supply according to the wiring diagram (refer to your vehicle's specific wiring instructions or consult a professional).
- Bluetooth Pairing: Turn on the device and enable Bluetooth on your mobile device. Search for available devices and select the car MP3 player to pair.
- Media Playback: Insert a USB drive or TF card, or connect an AUX device. Select your desired music format and begin playback.
- Adjust Settings: Adjust the volume and other audio settings using the user-friendly interface.
Visual Installation Reference

The unit is designed to fit seamlessly into your car's dashboard, providing a clean and integrated look.
Operating Instructions
Power On/Off
Press the power button (usually marked with ⑁) to turn the unit on or off.
Audio Source Selection
Press the MODE button to cycle through available audio sources: FM Radio, Bluetooth, USB, TF Card, and AUX Input.
Bluetooth Playback

- Ensure your mobile device's Bluetooth is enabled and the car stereo is in Bluetooth mode.
- Search for the device name (e.g., "JSD-530" or "JSD-520") on your phone and pair.
- Once paired, you can stream audio wirelessly from your device. The unit supports hands-free calling.
USB/TF Card Playback

- Insert a USB 2.0 storage device into one of the USB ports or a TF card into the designated slot.
- The player will automatically detect the media and begin playback.
- Supported audio formats include FLAC, APE, WAV, and MP3.
- Use the DIR+ and DIR- buttons to navigate folders, and the ◀◀ (previous) and ▶▶ (next) buttons for track selection.
FM Radio
- Select FM mode using the MODE button.
- Press the BAND button to switch between FM bands.
- Use the AMS button for automatic station scanning and storage.
- Manually tune using the ◀◀ (previous) and ▶▶ (next) buttons.
Volume and Audio Settings
- Rotate the main knob to adjust the volume.
- Press the EQ/LOUD button to cycle through equalizer presets or activate the loudness function for enhanced bass and treble at low volumes.
Maintenance
- Cleaning: To clean the unit, gently wipe the surface with a soft, slightly damp cloth. Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the finish or internal components.
- Dust Removal: Use a soft brush or compressed air to remove dust from buttons and crevices.
- Avoid Moisture: Ensure no liquids enter the unit, as this can cause electrical shorts and damage.
Troubleshooting
If you encounter any issues with your Car Radio Stereo Player, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Incorrect wiring, blown fuse, vehicle battery issue. | Check power connections and vehicle fuses. Ensure the car battery is charged. Consult a professional if unsure. |
| No sound | Volume too low, incorrect source selected, speaker wiring issues. | Increase volume. Verify correct audio source (FM, BT, USB, AUX). Check speaker connections. |
| Bluetooth not connecting | Device not in pairing mode, Bluetooth off on phone, interference. | Ensure stereo is in Bluetooth mode. Turn phone's Bluetooth off and on. Delete previous pairings and re-pair. |
| USB/TF card not playing | Unsupported file format, corrupted media, card/drive not inserted correctly. | Check file formats (FLAC, APE, WAV, MP3). Reinsert media. Try a different USB drive or TF card. |
| Poor FM reception | Weak signal, antenna issue. | Check antenna connection. Try scanning for stations again. Move to an area with better signal. |
If the problem persists after trying these solutions, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Numbers | JSD-530, JSD-520 |
| Brand | ouhoe |
| Material | Plastic |
| Power Output | 60W x 4 |
| Connectivity | Bluetooth 5.0 |
| Inputs | Dual USB 2.0, TF Card Slot, Built-in AUX Input |
| Supported Audio Formats | FLAC, APE, WAV, MP3, WMA |
| Radio Tuner | FM Audio Stereo |
| Package Dimensions (approx.) | Length: 19 cm, Width: 5 cm, Height: 5 cm |
| Package Weight (approx.) | 0.4 kg |
User Tips
- For the best audio quality, use high-quality audio files (e.g., FLAC, WAV) on your USB or TF card.
- Keep your device's firmware updated if updates become available (check the manufacturer's website).
- When using Bluetooth, ensure your phone is within close proximity to the stereo for a stable connection.
- Consider using a short, low-profile USB drive if space is a concern in your dashboard.
Warranty and Support
For any issues, technical assistance, or warranty inquiries, please contact the store support where you purchased the product. Please have your purchase details and model number ready when contacting support.
A detailed user manual in PDF format may be available for download. Please refer to the product page or contact support for access to this document.