1. Introduction
The BAOFENG MINI-5 is a compact and professional two-way radio designed for amateur radio enthusiasts. It features a palm-sized design for easy portability, multi-color appearance, and an ice blue backlight. Key functionalities include wireless programming via a Bluetooth APP, dual PTT for managing two frequency groups, one-button frequency matching, and versatile Type-C charging.
1.1. Items in the Package
The standard package includes the following items. Please note that the charger and power adapter may vary based on the dealer's final configuration. If using a Type-C charging method, some charging instructions in this manual may not be applicable.
| Item | Quantity (PCS) | Item | Quantity (PCS) |
|---|---|---|---|
| Radio | 1 | Power Adapter | 1 |
| Battery | 1 | Lanyard | 1 |
| Antenna | 1 | Operation Manual | 1 |
| Belt Clip | 1 |
Note: The charger and power adapter are subject to the final configuration of the dealer. Please understand that the charging instructions in this manual may not be appropriate if Type-C charging method.
Video: Unboxing and assembly of the BAOFENG MINI-5 radio, demonstrating battery and antenna attachment, and initial power-on.
2. Product Overview
The BAOFENG MINI-5 features a compact design with a clear display and intuitive controls. Below is a diagram illustrating the main components and their functions.

Image: BAOFENG MINI-5 Walkie-Talkie with key features highlighted.
2.1. Parts and Controls
Refer to the diagram for the location of each part:
- Antenna
- SK1-Customized Function Keys/Monitor button
- PTT-A Button (Push-to-Talk A)
- A/B button (Main/Sub Band Switch)
- Menu button
- PTT-B Button (Push-to-Talk B)
- Numeric Keypad/ Speaker
- Flashlight
- Volume/Power Knob
- Screen
- Accessory Port
- Exit button
- ▲ Up button/▼ Down button
- Flashlight/Search button
- Microphone
- LED Indicator
- Battery Latch
- Type-C Charging indicator light
- Type-C Charging Port
- V/M-VFO/MR button (VFO/Channel Mode Switch)
- Belt Clip

Image: Dimensions of the BAOFENG MINI-5 Walkie-Talkie.
2.2. LCD Display Icons
The LCD screen displays various icons to indicate the radio's status and active functions:
| Icon | Description |
|---|---|
| RSSI | Squelch Open/Close Indicator |
| H/L | Transmit power level indicator, According to Power |
| ♪ | Make sure you can hear the DTMF side tone from the radio speaker, set to DT-ST, ANI-ST, DT+ANI. |
| D | DCS enabled |
| C | CTCSS enabled |
| + | Enables access of repeaters in VFO/Frequency Mode. TX will be shifted higher in frequency than RX. |
| - | Enables access of repeaters in VFO/Frequency Mode. TX will be shifted lower in frequency than RX |
| D | Dual watch enabled |
| 🔒 | Keypad lock enabled |
| VOX | VOX enabled |
| 📞 | The confidential calling feature is activated |
| N | Narrowband enabled |
| 🔋 | Battery level indicator |
| R | Reverse function enabled |
| T | The terminal is switched from transit mode to pass-through mode. |
| SCR | The voice scramble function has been activated |
3. Setup
3.1. Attaching the Antenna
Turn the antenna clockwise until it is tight. To remove the antenna, turn it counterclockwise.
CAUTION:
- Do not hold the radio antenna in your hand, as this will reduce the performance of the radio and the life of the antenna.
- Do not shake the radio with the top of the antenna in your hand, as this will degrade the performance and life of the radio antenna.
3.2. Battery Installation and Charging
Before first use, ensure the battery is properly installed and fully charged.

Image: Type-C Charging options for the BAOFENG MINI-5.
When using the terminal for the first time, a low battery warning may occur. It is recommended to turn off the radio during charging. The battery's LEDs provide an indication of the current state of charge:
| Indicator light | Charging status |
|---|---|
| Red light is always on | Charging |
| Green light is always on | Charging complete |
4. Operating Instructions
4.1. Turning Your Radio On and Off
- To turn your radio ON, turn the [Volume/Power] rotary knob clockwise.
- To turn your radio OFF, turn the [Volume/Power] rotary knob counterclockwise.
4.2. Setting the Volume
- Increase volume by turning the [Volume/Power] rotary knob clockwise.
- To decrease volume, turn the [Volume/Power] rotary knob counterclockwise.
CAUTION: Do not hold the radio close to your ear. If the volume is set to an uncomfortable level, it could hurt your ear.
4.3. Locking or Unlocking Keypad
To avoid accidentally changing radio settings:
- Press and hold the [*] key to lock the keypad until the screen displays the "🔒" icon.
- In lock mode, you can turn the intercom on and off, adjust the volume, receive, transmit, send call tones, send emergency alerts, and listen to channels. All other functions remain locked.
- In lock mode, press and hold the [*] key to unlock the keypad until the "🔒" icon is no longer displayed to unlock the radio.
4.4. Keypad Entry
You can enter radio aliases, channel aliases, numbers, etc. using the radio's numeric keypad.
- To switch between input methods, press #.
- Press 1 to enter a special character (except in numeric input mode, where the number 1 is entered).
- Press 0 to enter a space (except in the numeric input mode, in which special characters are entered).
4.5. Selecting a Channel
The channel is the channel through which the signal is transmitted. Press the [V/M] button to toggle between VFO and channel mode to select channel mode.
- Press the ▲/▼ buttons or the rotary encoder to select the desired channel.
- Enter the channel number using the keypad. For example, to switch to channel 64, enter 064 totaling 3 digits to switch to channel 64.
4.6. Channel Memory
In Frequency and in Standby mode, you can store frequencies and parameters.
- Press [MENU] [3] [MENU] [1] [5], the screen will display “MEMCH”.
- Press [MENU] to enter the function. Press the ▲/▼ buttons to select the channel, then press [MENU] to store it. A sound tone will confirm that the storing succeeded.
- Press [EXIT] to exit to return to standby mode.
NOTES: If you want to set CTCSS tones, DCS codes or the frequency offset, you have to do it before storing the channel. Stored channels are displayed as CH-, other channels have no CH- display.
4.7. Deleting a Channel (DEL-CH)
In VFO mode and in standby mode, press [MENU] [3] [MENU] [1] [6], the screen will display “DELCH”.
- Press [MENU] to enter the function.
- Press the ▲/▼ buttons or rotate the encoder to select the channel you want to delete, then press [MENU] to confirm.
- To return to the standby mode Press [EXIT].
NOTE: Channel 1 cannot be deleted.
4.8. Main Band/Sub Band Switch
In standby mode, press the [A/B] key to toggle between the A and B bands to switch between the main/sub bands. The main band is the highlighted band. The darker displayed band is the sub-band.
4.9. VFO/Channel Switch
Press the [V/M] button to switch between VFO and channel display. VFO mode will display the VFO icon. MR mode will display the channel serial number.
4.10. Setting the VFO Frequency
Turn the radio to VFO mode, then press the [A/B] key to switch to the main channel.
- Operation 1: Input the VFO frequency directly with the keypad.
- Operation 2: Press the ▲/▼ button or rotary encoder to adjust the VFO frequency in the set frequency step.
4.11. Call Service
All radios in the group must be set to the same channel and sub-code to communicate. To ensure optimal reception volume, keep the distance between the microphone and your mouth at 2.5 cm to 5 cm when transmitting.
- Initiate a call: Select a channel, press and hold the [PTT-A] key, the radio transmits on segment A (upper screen) and the red indicator light is always on. Then speak into the microphone with normal voice tone. Press and hold the [PTT-B] key, the radio transmits on the B segment (lower screen), and the red indicator light is always on. Then speak into the microphone in a normal voice tone.
- Receive a call: After releasing the [PTT] key, the radio is in a receivable state. When receiving a call, the green indicator light is always on.
4.12. Emergency Alarm
Emergency alarm means that the terminal can initiate an emergency alarm to seek help from companions or a control center when an emergency occurs. In standby mode, press the preset [SOS] shortcut key to enable or disable the emergency alarm function.
4.13. Flashlight
In standby mode, press the preset [LAMP] shortcut key or the dedicated flashlight/search button to turn the flashlight on or off.
4.14. FM Radio Function
Set the [SK1] key to the radio function via Menu >> Radio Set >> Press SK1. Turn on the radio and press the SK1 key [FM Radio] to enter radio mode. The screen displays the tuning frequency. The following operations can be performed:
- Press ▲/▼ key to search for radio channels at the preset step frequency.
- Press the [#↑] key to search for radio channels automatically; the screen displays 'SEEK...'.
- Press [EXIT] key to switch frequency band between 65.0/75.0MHz.
- Press SK1 key [FM Radio] to exit radio mode.
4.15. Monitor
Press and hold the pre-programmed [Monitor] key to enter monitor mode and listen for weak signals on the current channel. You can also listen to the volume level of the radio when you are not receiving. This allows you to adjust the volume, if necessary. Release the [Monitor] key to exit the monitor mode.
4.16. Frequency Search
Press the pre-programmed [SEARCH] shortcut key or press and hold the dedicated flashlight/search button. The radio enters frequency search state, and the screen displays “SEARCH...”. Press [#2] key to switch the searching band, such as VHF/UHF, etc. The frequency and CTCSS/DCS code will be displayed after searching is completed. Press [MENU] to save the channel.
4.17. Reverse Frequency Function
Short press the [*] key in relay mode to invert the receive frequency and transmit frequency. The screen shows the R icon. This function is often used in repeater channels and is effective when there is a frequency difference between the receive frequency and the transmit frequency.
4.18. Talk Around Function
In repeater mode, press [*] to switch between Talkaround Mode and Repeater Mode. The screen displays the T icon and R icon. In Talkaround mode, the receive frequency is equal to the transmit frequency.
4.19. Repeater Activation Tone
Turn on the radio, press and hold the [PTT] key, then press the [SK1] to transmit 1750Hz audio to activate a repeater in hibernation.
4.20. Voice-activated transmit (VOX)
Enable VOX function to transmit without pressing the PTT key. Speech automatically triggers transmission, and transmission stops when speech ends. To enable VOX:
- In standby status, press [MENU][2][MENU][4] to enter Vox Switch.
- Press [MENU][2][MENU][5] to enter Vox Level, press ▲/▼ to select VOX level (level 1-9). The smaller the value, the higher the sensitivity. The V icon is displayed at the top of the screen. Default is off.
- To turn off VOX, select OFF OFF, and the V icon disappears.
- Press [MENU] key to save the setting and return to the upper menu.
4.21. Dual Watch
When in Dual watch mode, the radio can receive the frequency set for channel A or B. Operation is as follows:
- Press [MENU] [2] to enter Radio Set.
- Press [MENU] + ▲/▼ to select "15 Dual Watch".
- Press [MENU] key to enter Dual Watch Setting, press ▲/▼ key to select “On”.
- Press [MENU] key to save and return to the upper menu. The dual watch function will be turned on, and the icon 'D' will be displayed on the first line of the screen.
- To turn off, repeat the above operation and select "Off". The Dual Watch function is turned off and the icon 'D' disappears from the first line of the screen. The sub-band displays the "" icon.
4.22. Stopwatch Function
Press and hold the [MENU] key to enable the stopwatch function. The stopwatch timing operates as follows:
- Press the [MENU] key to start the stopwatch.
- Press the [MENU] key again to stop the stopwatch.
- Press the [EXIT] key to exit the stopwatch function.
4.23. Using Menu Functions
Basic use with arrow keys:
- Press the [MENU] button to enter the menu.
- Use the ▼/▲ buttons or the encoder to navigate between menu items.
- Once you find the desired menu item, press [MENU] again to select that menu item.
- Use the ▼/▲ buttons or the encoder to select the desired parameter.
- To confirm your selection, press [MENU] to save and return to the main menu. To cancel changes, press [EXIT] to reset and exit the menu.
- To exit the menu at any time, press the [EXIT] button.
Using the menu with short-cuts:
- Press the [MENU] button to enter the menu.
- Use the numerical keypad to enter the number of the menu item.
- To enter the menu item, press the [MENU] button.
- For entering the desired parameter, use arrow buttons or the numerical keypad for the short-cut code.
- To confirm your selection, press [MENU] to save and return to the main menu. To cancel changes, press [EXIT] to reset and exit the menu.
- To exit the menu at any time, press the [EXIT] button.
5. Wireless Programming
The BAOFENG MINI-5 supports wireless programming via a dedicated mobile application. This allows you to adjust frequencies and set parameters directly from your smartphone without needing a computer or programming cables.
5.1. Download the Radio APP
Before programming, install the OLA Radio APP on your Android or iOS phone. Scan the QR codes below to download the application:

Android App

iOS App
5.2. Programming Steps
- Press [MENU] + [4] on the radio to enter Wireless CPS mode.
- Press [MENU] + ▲/▼ to select “On”; the "" icon will be displayed on the first line of the screen.
- Open the OLA Radio APP on your phone, enable Bluetooth and location services.
- Select the walkie-talkie model “5Rmini Series” within the app.
- Connect to the radio via Bluetooth. The app will confirm successful connection and return to the home page.
- Read the radio data: After reading the frequency, click 'program' to enter program details. Here you can program channel information, frequency mode, and optional functions.
- Save Profile: Save the programmed profile as a new profile with a custom name. If you select 'Replace Program', click 'Replace Program' and save.
- Write data to radio: From the home page, select the program, click 'Write' to enter write frequency. The radio will restart automatically once the frequency writing is complete.

Image: Smartphone displaying the OLA Radio App connected to the BAOFENG MINI-5 for wireless programming.

Image: Visual guide for the Wireless Copy Frequency function.
6. Maintenance
6.1. General Care
- Keep the radio dry. If it gets wet, wipe it immediately.
- Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the radio.
- Clean the radio's surface with a soft, damp cloth.
- Avoid exposing the radio to extreme temperatures or direct sunlight for prolonged periods.
6.2. Battery Care
- Charge the battery fully before first use.
- Do not overcharge or deep discharge the battery.
- Store the radio and battery in a cool, dry place when not in use for extended periods.
7. Troubleshooting
If you encounter issues with your BAOFENG MINI-5, try the following basic troubleshooting steps:
- No Power: Ensure the battery is correctly installed and fully charged. Check the Volume/Power knob is turned clockwise.
- No Reception/Transmission: Verify the antenna is securely attached. Check that you are on the correct channel and frequency. Ensure the volume is set to an audible level.
- Poor Audio Quality: Check the antenna connection. Ensure you are within range of other radios or repeaters.
- Keypad Unresponsive: Check if the keypad lock is active (look for the "🔒" icon). Press and hold the [*] key to unlock.
- Programming Issues: Ensure the OLA Radio APP is correctly installed and Bluetooth/location services are enabled on your phone. Verify the radio is in Wireless CPS mode.
For more complex issues, refer to the full user manual (PDF) or contact customer support.
8. Technical Specifications
| General | |
|---|---|
| Receiver Frequency | FM 76-108 MHz; VHF 144-146MHz, UHF 430-440MHz |
| Transmission Frequency | VHF 144-146MHz, UHF 430-440MHz |
| Channel Spacing | 25.0KHz(Wide)/12.5KHz(Narr) |
| Memory Channel | 999 Groups |
| Operation Voltage | DC 7.4 V ±10% |
| Dimensions | 108mm×52mm×39mm (No antenna) |
| Weight | 212g (Battery pack included) |
| Transmission current | ≤1600mA |
| Receive Sensitivity | 0.25μV (12dB SINAD) |
| Rated Audio Power Output | 1W @16 ohms |
| Receive current | ≤380mA |
| Connection for accessories | 2 pin Kenwood jack |
| Antenna impedance | 50 Ohm |
NOTE: All specifications may be modified without prior notice or liability.
9. User Tips
- The BAOFENG MINI-5 offers excellent aviation-band audio, which is often crisp and clear, making it a great choice for airband reception.
- The radio is user-friendly and easy to program directly from the front panel, allowing quick setup of channels.
- Utilize the mobile app for wireless programming to conveniently configure channels and transfer settings, enhancing flexibility.
- For optimal performance, especially good audio quality and reception, consider using a high-quality antenna.
- Despite its compact size, the MINI-5 provides a wide range of features, offering a balance of portability and advanced functionality.
10. Compliance Information
10.1. EU Declaration of Conformity
Baofeng and Pofung declare that the radio equipment type listed in Technical Specifications is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following link: http://www.pofung.cn/download.asp?EnBigClassName=EU%20DOC. For assistance, contact your local Baofeng helpdesk, your dealer, or send an email to wangjianhui@baofengradio.com.
10.2. Conditions of Use
The frequency band on which this device operates is subject to limitations and/or permissions for usage. Operators in EU countries must consult the entrusted authorities and possess a license or a frequency assigned by their respective competent authority.
| FR | DE | IT | NL |
|---|---|---|---|
| BE | LU | DK | IE |
| HR | GR | ES | PT |
| FI | AT | SE | PL |
| HU | CZ | CY | SI |
| SK | LV | LT | EE |
| BG | RO | MT |
10.3. Waste Electrical and Electronic Equipment (WEEE)
All articles displaying the crossed-out wheeled bin symbol on the body, packaging, or instruction manual must not be disposed of in normal waste bins. They must be brought to specialized waste disposal centers for proper recycling. This contributes to environmental protection and prevents potential negative effects on health and the environment.
11. Warranty and Support
For warranty information and customer support, please refer to the official BAOFENG website or contact your local dealer. The manufacturer's contact details are:
PO FUNG ELECTRONIC (HK) INTERNATIONAL GROUP COMPANY LIMITED
Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong
Http://www.pofungshop.com
E-mail: sales@pofungshop.com
Print version: MINI-5_V1.0
12. Disclaimer
The accuracy and completeness of the contents are sought in the process of compilation, but we do not bear any responsibility for possible errors or omissions. With the continuous development of technology, we reserve the right to change the design and specification of the product without notice. No copy, modification, translation, and dissemination of this handbook may be made in any form without the prior written authorization of our department.