Pokpaw CL23 App-Controlled Self-Cleaning Cat Litter Box

1. Product Overview

The Pokpaw CL23 is an advanced app-controlled self-cleaning cat litter box designed to provide a hygienic and convenient solution for cat owners. It features automatic cleaning, odor control, and multiple safety sensors to ensure your cat's well-being.

Image: Pokpaw CL23 litter box demonstrating app remote control features.

2. Package Contents

Please check the package to ensure all items are present:

• Automatic Cat Litter Box (1)
• Power Adapter (1)
• Cleaning Brush (1)
• Deodorizing Block (Soap) (1)
• Garbage Bag Roll (1)
• User Manual (1)
• Warranty Card (1)

Image: Visual representation of the complete package contents.

3. Setup Instructions

1. Unboxing and Placement: Carefully remove all components from the packaging. Place the litter box on a flat, stable surface. Ensure there is enough space around the unit for proper operation and maintenance.

   Play video

   Video: Demonstrates unboxing and initial setup of the litter box.

2. Install the Waste Drawer: The waste drawer is pre-installed. Ensure it is securely in place at the bottom of the unit.

3. Add Cat Litter: Fill the litter compartment with a suitable clumping cat litter. The Pokpaw CL23 is compatible with Bentonite, Mineral, and Mixed Tofu litters. Natural fiber litters are not recommended.

   

   Image: Guide to compatible cat litter types.

4. Connect Power: Plug the power adapter into the litter box and then into a wall outlet. Ensure the power switch on the unit is turned ON.

5. App Connection (Smart Device):

   • Download the Pokpaw app from your smartphone's app store.
   • Follow the in-app instructions to connect your litter box to your home Wi-Fi network.
   • Once connected, you can control the litter box remotely, monitor usage, and adjust settings.

4. Operating Instructions

Automatic Cleaning

The litter box is designed to automatically clean after your cat uses it. The cleaning cycle typically lasts 60 seconds and can be set to run up to 5 times per day via the app. This eliminates the need for manual scooping.

App Remote Control

Use the Pokpaw app to:

• Initiate a cleaning cycle manually.
• Set cleaning schedules.
• Monitor your cat's usage and weight (Cat Weight +10g detection).
• Receive alerts and warnings.
• Activate Kitten Mode.

Kitten Mode

For kittens under 6 months or weighing less than 1kg, activate Kitten Mode via the app. In this mode, the litter box will not automatically clean after use. This helps prevent startling young cats and allows owners to monitor their kitten's stool for health issues.

Quiet Operation

The Pokpaw CL23 operates at a whisper-quiet level of ≤ 35dB, ensuring it does not disturb your household or your cat.

Image: Noise level comparison demonstrating quiet operation.

5. Maintenance

Emptying the Waste Bin

The litter box features an 8L large waste bin that can hold waste for up to half a month for one cat. To empty:

1. Pull out the waste drawer located at the bottom front of the unit.
2. Remove the full garbage bag, tie it securely, and dispose of it.
3. Place a new garbage bag in the drawer and slide it back into the unit until it clicks into place.

Image: Steps for emptying the waste drawer.

Cleaning the Unit

For thorough cleaning, follow these steps:

1. Unplug the unit from the power source.
2. Press the release button to detach the top section.
3. Remove the internal liner and wash it with mild soap and water.
4. Wipe down the exterior of the unit with a damp cloth. Do not submerge the main unit in water.
5. Ensure all parts are completely dry before reassembling and plugging in the unit.

Image: Visual guide for cleaning and maintenance.

Odor Control

The litter box includes a deodorizing block (soap) to help neutralize odors. Replace this block as needed to maintain freshness.

6. Troubleshooting and Safety Features

The Pokpaw CL23 is equipped with multiple safety features to protect your cat:

• 4 Weight Sensors: Detects your cat's presence and stops cleaning cycles instantly if a cat enters the box.
• 2 Pairs of Infrared Sensors: Provides additional detection for movement within the litter box.
• Motor Overload Protection: Prevents damage to the motor in case of obstruction.
• App Warning: The app provides real-time alerts for any detected issues or safety concerns.

Image: Diagram of safety sensors and protection features.

Common Issues

• Unit not cleaning: Check power connection, ensure the waste drawer is correctly inserted, and verify no cat is currently inside the box. Check app for error messages.
• Odor persists: Ensure the deodorizing block is fresh and the waste bin is emptied regularly. Consider changing litter type if odor is still an issue.
• App connectivity issues: Ensure your litter box is within Wi-Fi range and your router is functioning correctly. Restart both the litter box and your router if necessary.

7. Specifications

Image: Product dimensions and recommended cat weight.

8. Warranty and Support

The Pokpaw CL23 App-Controlled Self-Cleaning Cat Litter Box comes with a one-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For detailed information, troubleshooting, or to contact customer support, please refer to the official user manual PDF:

Download User Manual (PDF)

9. User Tips

• Gradual Introduction: Introduce your cat to the new litter box gradually. You can place some of their old litter in the new box initially to help them adapt.
• Monitor Litter Levels: Regularly check the litter level and refill as needed to ensure optimal cleaning performance.
• Regular Deep Cleaning: While the automatic cleaning handles daily waste, a periodic deep clean of the entire unit (as described in Section 5) is recommended to maintain hygiene and extend product life.
• App Notifications: Enable app notifications to stay informed about cleaning cycles, waste bin status, and any potential issues.
• Kitten Mode for Small Cats: Always use Kitten Mode for very young or small cats to ensure their safety and comfort during the adaptation period.