SoBuy FSR211-N

Contents

SoBuy FSR211-N Shoe Bench with Seat User Manual

Model: FSR211-N

1. Important Safety Information

Please read all safety instructions carefully before assembly and use. Keep this manual for future reference.

  • Choking Hazard: Keep small parts and assembly hardware out of reach of children. Swallowing or inhaling small parts can be fatal.
  • Tipping Hazard: Do not allow children to climb on, play with, or hang from the product. This can cause the product to tip over, leading to serious injury.
  • Suffocation Hazard: Keep all plastic bags and packaging materials away from children.
  • Product Damage: Avoid using sharp objects or corrosive chemicals on the product, as this can cause damage to the finish or structure.
  • Inspection: Do not use the product if it is defective, damaged, or if any parts are missing. Contact customer service for assistance.
  • Stability: Ensure all fasteners are securely tightened during assembly. Periodically check and re-tighten fasteners to maintain stability.

2. Package Contents

2.1. Tools Required (Not Included)

  • Hammer
  • Phillips Head Screwdriver
  • Measuring Tape

2.2. Parts List

Refer to the provided assembly diagram for visual identification of each part.

Part No.DescriptionQuantity
1Top Panel1
2Bottom Panel1
3Left Side Panel1
4Right Side Panel1
5Middle Divider Panel1
6Horizontal Support Panel2
8Back Panel2
9Shoe Compartment Base2
10Shoe Compartment Front Panel2
11Shoe Compartment Back Panel2
12Legs5
13Seat Cushion1

2.3. Hardware List

ItemDescriptionQuantity
ACam Bolt (M6*35)18
BCam Lock (Ø15*10)18
CWooden Dowel (Ø6*30)16
DShoe Rack Support Bracket (120*40)2
EScrew (M3*10)4
FPlastic Corner Connector (26*9*17)4
GDoor Hinge (Ø4.5*11)4
HScrew (M4*10)4
JScrew (M4*40)6
KShoe Rack Side Bracket (M4*14)12
LShoe Rack Mechanism (260*200)2
MScrew (M3.5*16)12
NScrew (M3*14)8
OPlastic Plug (13*14*10)8
RShoe Rack Mechanism (260*200)2
TFloor Glide (Ø25*2)5

3. Setup and Assembly Instructions

Estimated Assembly Time: Approximately 30 minutes for 1 person.

Follow the numbered steps and diagrams carefully. Ensure all parts are correctly oriented before tightening screws.

3.1. Bolt Installation Guide

When installing cam bolts and connecting pieces, ensure correct direction. Insert cam bolts when connecting pieces are aligned as shown in the diagram.

3.2. Assembly Steps

  1. Step 1: Attach 2x Cam Bolts (A) and 2x Plastic Corner Connectors (F) to Panel 5. Flip Panel 5 (180°) and attach 2x Cam Bolts (A) and 2x Plastic Corner Connectors (F) to the other side.
  2. Step 2: Attach 4x Cam Bolts (A) and 2x Plastic Corner Connectors (F) to Panel 3. Attach 4x Cam Bolts (A) and 2x Plastic Corner Connectors (F) to Panel 4.
  3. Step 3: Connect Panel 5 to Panel 6 using 2x Cam Bolts (A) and 2x Cam Locks (B).
  4. Step 4: Connect Panel 5 to another Panel 6 using 2x Cam Locks (B).
  5. Step 5: Attach Panel 3, Panel 5, and Panel 4 to the assembled Panel 6 sections using 4x Cam Locks (B).
  6. Step 6: Slide Back Panels (8) into the grooves of the assembled frame.
  7. Step 7: Attach Top Panel (2) to the structure using 6x Wooden Dowels (C) and 6x Screws (J).
  8. Step 8: Attach 5x Floor Glides (T) to the bottom of the unit. Insert 5x Legs (12) into the floor glides.
  9. Step 9: Attach 10x Cam Bolts (A) to Panel 1.
  10. Step 10: Attach Panel 1 to the main structure using 6x Cam Locks (B) and 10x Wooden Dowels (C).
  11. Step 11: Secure the structure using 4x Cam Locks (B), 8x Screws (N), and 8x Plastic Plugs (O).
  12. Step 12 (x2): Assemble each shoe compartment. Attach 12x Shoe Rack Side Brackets (K) to Shoe Compartment Base (9). Attach 2x Shoe Rack Mechanisms (L) and 4x Screws (M) to the assembly. Attach 2x Shoe Rack Mechanisms (R) to complete the frame.
  13. Step 13 (x2): Attach 2x Shoe Rack Support Brackets (D), 4x Screws (E), and 4x Screws (M) to the assembled shoe compartment frame. Rotate the assembly 90 degrees.
  14. Step 14: Install the assembled shoe compartments into the main unit. First, tighten half of the screws (G, H) on the left and right shafts of the hopper to secure it. Then, tighten all screws on both sides to ensure even clearance of the door.
  15. Step 15: Attach 2x Screws (M) to secure the Shoe Compartment Front Panel (10).
  16. Step 16: Attach 2x Screws (M) to secure the Shoe Compartment Front Panel (10) from the inside.
  17. Step 17: Place the Seat Cushion (13) on top of the bench.
Assembled SoBuy FSR211-N Shoe Bench in a hallway

Figure 3.1: Fully assembled SoBuy FSR211-N Shoe Bench.

4. Operating Instructions

The SoBuy FSR211-N Shoe Bench is designed for both seating and shoe storage in narrow spaces.

4.1. Seating Function

  • The bench features a soft, 4cm thick seat cushion for comfortable seating while putting on or taking off shoes.
  • The maximum load capacity for seating is 237 kg. Do not exceed this weight limit.
Close-up of the soft seat cushion

Figure 4.1: Soft seat cushion details (4cm thick, high-elastic, breathable).

4.2. Shoe Storage

  • The bench features two tilt-out shoe compartments with recessed handles for easy access.
  • Each compartment can store shoes up to EU size 47.
  • The internal shelves are adjustable, allowing for single or double-layer storage depending on shoe height. This provides flexibility for various shoe types, including boots with shaft heights under 10 cm.
  • The total capacity is approximately 8 pairs of shoes.
Shoe bench with doors open showing stored shoes

Figure 4.2: Shoe bench with compartments open, displaying shoe storage.

Diagram showing adjustable shoe compartment shelves

Figure 4.3: Adjustable compartment for single or double-layer shoe storage.

5. Maintenance

5.1. Cleaning

  • Wood Surfaces: Wipe the wood grain and melamine surfaces with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the finish.
  • Seat Cushion: The seat cushion is removable and washable. Follow the care instructions on the cushion label for best results. Typically, spot clean with mild soap and water or machine wash on a gentle cycle.

5.2. General Care

  • Fasteners: Periodically check all screws and cam locks to ensure they are tight. Re-tighten if necessary to maintain the bench's stability.
  • Placement: Avoid placing the bench in direct sunlight or near heat sources, as this can cause fading or warping.
  • Floor Protection: The bench is equipped with floor glides to protect your flooring. Ensure they are intact and properly positioned.

6. Troubleshooting

ProblemPossible CauseSolution
Bench is wobblyLoose fasteners; uneven floorCheck and tighten all screws and cam locks. Ensure the bench is on a level surface.
Shoe compartment doors do not close properlyIncorrect installation of hinges or shoe rack mechanism; obstructionReview Step 14 of assembly. Ensure all screws for hinges and mechanisms are tightened evenly. Check for any shoes or objects obstructing closure.
Missing parts or hardwarePackaging errorCarefully check all packaging materials. If parts are still missing, contact customer service with the part number.
Surface damage (scratches, dents)During assembly or useUse furniture repair markers or contact customer service for advice on minor repairs.

7. Specifications

FeatureDetail
Model NumberFSR211-N
MaterialPB + MDF E1, Linen (cushion)
ColorWood grain and melamine surface (Natural)
StyleMinimalist Modern, Scandinavian Design
Product Dimensions (L x W x H)100 cm x 24 cm x 50 cm
Net Weight16.1 kg
Maximum Load Capacity237 kg
Drawer Number2 (tilt-out compartments)
Shoe Size CompatibilityUp to EU size 47
Installation MethodAssembly required
Dimensions diagram of SoBuy FSR211-N Shoe Bench

Figure 7.1: Product dimensions diagram.

8. User Tips

  • Optimize Storage: Utilize the adjustable shelves to maximize space for different types of footwear. Taller boots can use a single-layer setting, while flats or sneakers can be double-stacked.
  • Regular Checks: Periodically (e.g., every 3-6 months) check and tighten all assembly screws to ensure the bench remains sturdy and safe.
  • Keep it Clean: Regularly wipe down the surfaces to prevent dust buildup and maintain the aesthetic appeal of the wood grain finish.
  • Hallway Placement: Due to its slim 24cm depth, this bench is ideal for narrow hallways. Position it carefully to ensure it doesn't obstruct walkways.

9. Support and Contact Information

For any questions, missing parts, or issues with your SoBuy FSR211-N Shoe Bench, please contact our customer service team.

  • Customer Service Email: cs@sobuy-shop.com
  • When contacting support, please provide your website of purchase, order number, tracking number, and a detailed description of the issue. For damages or defects, attaching 2-3 photos (preferably JPG or PDF format) of the damaged parts and packaging will help expedite the process.

You can also refer to the official user manual PDF for more detailed diagrams and instructions: View User Manual PDF

© 2025 SoBuy. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.