FMART T11

Contents

FMART T11 Window Cleaning Robot User Manual

Model: T11

1. Product Overview

The FMART T11 is an advanced window cleaning robot designed for efficient and thorough cleaning of various glass surfaces. It features a powerful 5300Pa suction, a 100ml water tank with a 4-way ultrasonic spray system, and a slim 60mm design for reaching tight spaces. Control is intuitive via a remote or a smartphone app with multi-language support.

FMART T11 Window Cleaning Robot with remote and cleaning pads
Figure 1: FMART T11 Window Cleaning Robot and accessories.

Key Features:

  • 4-Way Ultrasonic Spray: Intelligent atomization system for even moisture distribution and enhanced stain removal.
  • 100ml Large Water Tank: Cleans up to 60 square meters on a single refill.
  • Ultra-Slim 60mm Design: Easily navigates narrow gaps and tight corners.
  • Smart Control: Operable via 2.4GHz wireless remote or smartphone app (iOS/Android) with 10-language support and voice guidance.
  • 5300Pa Strong Suction: Ensures firm adhesion to glass surfaces.
  • Triple Safety Protection: Built-in UPS system (20 min backup) and 4m safety rope (1393N load capacity).
  • Multiple Cleaning Modes: Quick Clean, Deep Clean, and Spot Clean.
Key features of FMART T11: speed, coverage, noise, slim design, power cord length
Figure 2: Overview of T11's performance metrics.

2. Setup and Installation

2.1 Unboxing and Package Contents

Carefully unpack all items from the box. Ensure all components are present:

  • 1 x Main Body (FMART T11 Robot)
  • 1 x Power Plug
  • 1 x Adapter
  • 1 x Power Cord
  • 1 x Safety Rope (4m)
  • 1 x Water Filling Bottle
  • 1 x Remote Control
  • 1 x User Manual (this document)
  • 12 x Cleaning Cloths
FMART T11 robot and all included accessories
Figure 3: All components included in the package.

2.2 Attaching Cleaning Cloths

  1. Ensure the robot is powered off.
  2. Attach two clean cleaning cloths to the dual cleaning pads on the underside of the robot. Ensure they are securely fastened.

2.3 Filling the Water Tank

  1. Locate the water tank cap on the robot.
  2. Open the cap and use the provided water filling bottle to fill the 100ml tank with distilled water or a recommended window cleaning solution. Do not overfill.
  3. Securely close the water tank cap.
Close-up of the 100ml water tank and spray nozzles
Figure 4: Water tank and spray nozzle detail.

2.4 Power Connection and Safety Rope

  1. Connect the power cord to the robot, then to the adapter, and finally to a power outlet. The robot requires continuous power during operation.
  2. Attach the safety rope to the designated anchor point on the robot.
  3. Secure the other end of the safety rope to a sturdy indoor fixture, such as a heavy piece of furniture or a window frame anchor, to prevent accidental falls, especially when cleaning high-rise windows. The rope has a 1393N load capacity.

2.5 App Installation (Optional)

  1. Download the FMART app from your smartphone's app store (available for iOS and Android).
  2. Follow the in-app instructions to pair your device with the T11 robot via Bluetooth or Wi-Fi.

3. Operating Instructions

3.1 Powering On and Placement

  1. Ensure the robot is connected to power and the safety rope is secured.
  2. Press the power button on the robot or the remote control to turn it on.
  3. Place the robot firmly on the glass surface you wish to clean. The powerful suction will engage automatically, securing the robot to the window.

3.2 Cleaning Modes

The FMART T11 offers three cleaning modes:

  • Quick Clean: For light dirt and maintenance cleaning.
  • Deep Clean: Performs two passes for more thorough cleaning of stubborn stains.
  • Spot Clean: Focuses on a specific area for intensive cleaning.
Three cleaning modes: Quick Clean, Deep Clean, Spot Clean
Figure 5: Visual representation of the three cleaning modes.

3.3 Control Options

You can control the robot using the remote control or the smartphone app:

  • Remote Control: Use the directional buttons to guide the robot, and dedicated buttons for cleaning modes and spray functions.
  • Smartphone App: Provides real-time control, allows selection of cleaning modes and spray settings, and offers voice guidance in 10 languages (German, English, French, Italian, Russian, Korean, Portuguese, Spanish, Japanese, Chinese). The app also provides installation guides and troubleshooting tips.
Smartphone app interface for controlling the FMART T11
Figure 6: App control interface with various settings.

3.4 Automatic Operation

The T11 utilizes an inter-rotational movement zigzag route for comprehensive coverage. It features a memory point function and will auto-return to its starting position upon completion of cleaning or if power is interrupted.

3.5 Power Outage Protection

In case of a power outage, the built-in UPS system will keep the robot secured to the window for up to 20 minutes, allowing you time to safely retrieve it.

4. Maintenance

4.1 Cleaning Cloths

After each use, remove the cleaning cloths from the robot. They are washable and reusable. It is recommended to wash them thoroughly to remove all dirt and debris before the next use. Replace cloths when they show signs of wear or reduced cleaning effectiveness.

4.2 Water Tank and Nozzles

Empty any remaining water from the tank after use. Periodically clean the water tank and the ultrasonic nozzles to prevent clogging and ensure optimal spray performance. Use a soft brush or cloth for the nozzles if necessary.

4.3 Robot Body

Wipe the exterior of the robot with a soft, dry cloth to remove dust or smudges. Do not use abrasive cleaners or immerse the robot in water.

5. Troubleshooting

  • Robot not sticking to window: Ensure the power cord is securely connected and the robot is powered on. Check if the suction pads are clean and free from debris. The window surface should also be relatively clean and dry for optimal suction.
  • Robot not spraying: Check if the water tank is filled. Ensure the nozzles are not clogged. Clean them if necessary.
  • Robot not moving or moving erratically: Check for any obstructions on the window surface. Ensure the cleaning cloths are properly attached and not interfering with movement. Restart the robot and try again.
  • App connectivity issues: Ensure your smartphone's Bluetooth/Wi-Fi is enabled and the robot is within range. Try restarting both the app and the robot. Check for app updates (OTA updates are supported).
  • Voice prompts not working: Check the volume settings on the robot or within the app. Ensure the correct language is selected.

6. Specifications

CategorySpecification
GeneralBrand: FMART
Type: Window Cleaning Robot
Model: T11
Color: White
PerformanceShape: Round
OTA Update: Yes
Cleaning Mode: Inter-rotational Movement Zigzag Route
Auto-spray System: Quadruple, Ultrasonic Nozzle
Water Tank Capacity: 100ml (Removable)
APP Smartphone Controlled: iOS/Android
Voice Prompt: Yes (10 languages)
Power: 72W
Battery Capacity: 750mAh
Suction Power: 5300Pa
Cleaning Speed: 2.36 in/s
Noise Level: <60 dB
UPS Backup: 20 minutes
Physical AttributesProduct Weight: 1kg
Product Size (L x W x H): 292 × 144 × 58mm
Safety Rope Length: 4m
Safety Rope Load Capacity: 1393N
Power Cord Length: 20.34 feet
CertificationCE
Detailed specifications table for FMART T11
Figure 7: Comprehensive product specifications.

7. User Tips

  • For best results, pre-clean heavily soiled windows to remove loose dirt and large debris before using the robot.
  • Always ensure the safety rope is securely fastened to a stable anchor point, especially when cleaning exterior windows or at heights.
  • Use distilled water or a manufacturer-recommended cleaning solution to prevent mineral buildup in the nozzles and water tank.
  • Regularly check and clean the cleaning pads. Dirty pads can lead to streaks and reduced cleaning efficiency.
  • When cleaning multiple windows, refill the water tank and change cleaning pads as needed to maintain optimal performance. The 100ml tank can cover up to 60 square meters.
  • The robot is suitable for various surfaces including glass, marble, tiles, mirrors, and wooden doors.
FMART T11 cleaning various surfaces like glass, marble, tiles, mirrors, and wooden doors
Figure 8: Applicable surfaces for the FMART T11.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or visit the official FMART website. Keep your purchase receipt as proof of purchase for warranty claims.

© 2024 FMART. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.