1. Introduction
Thank you for purchasing this AZDOME dashcam. This instruction manual contains information on how to operate your dashcam. Before using your dashcam, we recommend that you read through this manual to ensure correct usage. To improve the performance of the product, the contents of this manual are subject to change without prior notice. Please read and understand the manual before operating.
- Please ALWAYS connect with power when using.
- AZDOME M500 comes with an AZDOME 64GB memory card in the package. Please format our memory card before first use to ensure better recording.
For further assistance, you can email us at: service@azdomevip.com
You can also scan the QR code below to download the manual:
QR code to download the full user manual (PDF)
2. What's Included
The package contains the following accessories. If any accessories are missing, please contact us as soon as possible.
- Dash camera ×1
- Rear camera (6M/20ft) ×1
- Electrostatic films ×4
- Car charging cable (5V/1.5A) ×1
- Storage card ×1 (64GB microSD card)
- Cable clips ×5
- Pry tool ×1
- User manual ×1
Note:
The M500 dash cam supports memory cards of up to 128GB. We recommend using a Class 10, U3, A2 Speed microSD memory card. Unqualified memory cards may cause the machine to restart repeatedly or incomplete recordings. Please format your memory card before first use to ensure better recording.

Image: AZDOME M500 3-Channel package contents including front cam, rear cam, cables, SD card, and accessories.

Image: Detailed packing list showing each item included in the box.

Image: Illustration of the built-in 64GB memory card with up to 20M/s write speed.
3. Installation
Install the front camera behind the rear view mirror. Install the rear camera at the top of the back windshield. Remove any foreign matter and clean and dry the windshield before installation.
- Turn off the engine, gently push the microSD card into the slot until it locks into place. (Please use a Class 10 or above high-speed U3 micro-SD card).
- Find a suitable place on the windshield where it doesn't obstruct the driver's field of vision and remove any foreign matter and clean and dry the windshield before installation. Tear off the protective layer of the electrostatic sticker and adhere the electrostatic sticker to the windshield to prevent marks/glue on your windshield after removing it.
- Peel off the protective film from the double-sided tape and attach the front camera to the electrostatic sticker. Adjust the angle of the lens by rotating the front and inside camera.
- Peel off the protective film from the double-sided tape and attach the rear camera to the rear windshield. Adjust the angle of the lens by rotating the body of the rear camera, then connect the front camera and the rear camera.
- Use the pry tool to lift the edges of the rubber window sealing and molding and tuck in the rear camera connection cable.
- Plug the cigarette lighter power cable into the cigarette lighter socket and the front camera. Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord.
- Turn on the engine. The dashcam will power up and start recording. Video files are stored on the microSD card. Turn off the engine. The dashcam will automatically stop recording and power down.

Image: Diagram illustrating the placement of the front camera and routing of the USB charging cable.

Image: Diagram illustrating the placement of the rear camera and routing of its connection cable.
4. Operating Instructions
4.1. Button Functions
Refer to the diagram below for the location and function of each button and port on your AZDOME M500 dash cam.

Image: Diagram showing the dash cam's components including sliding mount, speaker, front camera, Type-C charging port, TF card slot, rear camera port, IR illuminator, rear camera, screen, reset button, ventilation hole, and power button.
4.2. Power On/Off
The camera is designed to power up and record automatically when it receives power. It then saves the video recording and turns off automatically when the car shuts off.
Auto Power ON/OFF
Plug the car charger into the cigarette lighter socket. When the car engine is on, the dash cam will turn ON and start recording automatically. When the car key is turned to the LOCK position, the dash cam automatically saves the recording and turns OFF.
Manual Power
Short press the power button to switch between front, middle, and rear screens/app download QR code/time/version number/turn off screen/turn on screen. Long press for 3 seconds to turn on/off WiFi; Long press for 6 seconds to format the TF card and restore factory settings; Press and hold for 10 seconds to force shutdown, then press and hold for 3 seconds to power on.
Note:
- Some trucks' or cars' 12V cigarette outlets are always HOT, which means they provide constant power even when the car is turned off and locked. If this is the case for your vehicle, the auto ON/OFF feature will not work. To remedy this, you can either hardwire your dash cam to your car's fuse box with a 3-Lead Auto Trigger Hardwire Kit or reconfigure the fuse box connection for your 12V outlet to a switched circuit that only activates when the ignition is in ACC or ON position.
4.3. Screen Indicators
| Screen Display | Status |
|---|---|
| ● | The red dot flashing indicates normal video recording |
| ● | The yellow dot flashing indicates locked video recording |
| 🎤 | Audio recording is on |
| 🔇 | Audio recording is off |
| 📶 | WiFi is on |
| 📴 | WiFi is off |
| 🗂️ | TF card is normal |
| ❌ | TF card has an error |
4.4. Voice Commands
The AZDOME M500 supports voice control for convenient operation. Here are the available commands:

Image: Visual representation of smart voice control commands.
| Voice Command | Action | Device Status |
|---|---|---|
| Show front camera | Enter front road view | Front road preview interface |
| Show rear camera | Enter rear road view | Rear road preview interface |
| Take photo | Capture photo during recording | Photo taken during video |
| Lock the video | Lock current emergency video | Video locked during recording |
| Turn on audio | Enable video recording sound | Audio recording activated |
| Turn off audio | Disable video recording sound | Audio recording deactivated |
| Turn on screen | Wake up device screen | Screen on |
| Turn off screen | Dim device screen | Screen off |
| Inside video on | Enter the central lens view | Displaying the central lens recording feed |
4.5. Product Features
The AZDOME M500 dash cam offers a range of features to enhance your driving safety and recording experience.

Image: Explanation of 4K+1K+1K recording, showing front, cabin, and rear camera views with 150° angles.

Image: Demonstration of Power Night Vision, highlighting 4K recording in low-light conditions.

Image: Features of the 24H Parking Monitor, including Collision Detection and Time-lapse Recording.
| Feature Name | Description |
|---|---|
| Driving Recorder | Automatically starts/stops recording when car engine is turned on/off. Videos saved to TF card. Overwrites oldest files when full. File types: Locked (Event), Normal (Normal), Photos (Photo). |
| Photo Capture | Capture photos during recording via voice command ("Take photo") or app. Saved to "Photo" folder. |
| Emergency Lock | Lock current video via voice ("Lock the video") or collision detection. Locked videos are not overwritten. |
| Parking Monitoring Modes |
|
| Time-lapse Duration Settings | Can be set to 4 hours, 8 hours, 12 hours, 24 hours, or all the time; the default is 12 hours, and it will be closed after recording for 12 hours. |
Note:
The parking monitoring feature of the dashcam requires a 3-Lead Hardwire Kit for power supply to function properly. Using the cigarette lighter socket does not support this feature, as most vehicles cut power to the socket after ignition is turned off, preventing continuous power delivery to the dashcam.

Image: Explanation of the Loop Recording feature, showing how older clips are overwritten.
5. AZDOME App Usage
The AZDOME App allows you to easily manage your dash cam recordings and settings from your smartphone.
App Download
Search for the AZDOME App in the Google Play Store or Apple App Store and install it on your smartphone.

Image: AZDOME app interface showing Live View, Replay, Download, Share, and Settings options.

Image: AZDOME app interface showing app download QR codes for App Store and Google Play.
Connecting to the App
- Turn on the dash cam's WiFi: Press and hold the power button for 3 seconds to turn WiFi on/off. Ensure the WiFi icon on the dash cam's screen is activated before connecting.
- Connect to the dash cam's WiFi on your mobile phone before opening the AZDOME APP. The WiFi Name (SSID) is typically
M500_********and the Default Password is12345678. - After installing the AZDOME App, register with your email on the registration screen to log in. If you are unable to receive the verification code, click "Skip Login" in the top right corner to enter the next page and click "Add Device".
- Select your dash cam type.
- Select "I have installed and powered on the Dash Cam" and click "Next".
- Select "Wi-Fi connected" and click "Next".
- Maintain the WiFi connection with the dashcam, then click on the added dashcam card in the "Device" interface to access the preview screen and view dashcam videos or configure dashcam settings.

Image: Screenshots illustrating the steps to connect the dash cam's WiFi to your smartphone.
Viewing and Managing Recordings
After entering the "Live Video Preview" interface, first click the "Stop" button to pause recording, then click the "Dashcam Albums" button to access the "Recorder Album" to view, manage, and download saved videos and photos. Click "Select" in the upper right corner of the interface to choose videos for download or deletion.
Note:
- Do not disconnect the WiFi connection while your phone is paired with the dash cam. During this process, your phone may temporarily lose internet access as the dash cam's WiFi does not provide network services.
- Videos and photos downloaded from the "Recorder Album" can be viewed, managed, and shared in the "Local Album" under the "Mine" section of the app.
App Settings
On the "Live Video Preview" interface, click the settings gear icon in the upper right corner to access the "Dashcam Settings" interface for detailed configuration of the dashcam's functions.
WiFi Feature Details
- What is a WiFi Feature? The WiFi feature enables wireless pairing between your dash camera and smartphone, allowing instant access to recordings. You can easily view, download, and share videos with friends and family. Similar to Bluetooth speaker connectivity, dash cameras use WiFi (not Bluetooth) for smartphone pairing.
- Can I watch the videos around my car remotely? The dash cam is NOT made to broadcast footage over the cloud or internet. It is NOT a cloud or an IP camera and it is NOT meant to do that. You can get live video and footage on the dash cam's APP as long as you stay within the 10FT range from the dashcam.
- What is the WiFi Range? The WiFi signal range is about 10FT when there are NO obstructions in the middle. Please NOTE that just like your home WiFi network, you don't have WiFi signal outside your home, the same way, WiFi range is 10FT from this small device.
- Can't find the dash cam's WiFi name in your phone's WiFi list? Please manually enable the WiFi function on the dash cam first, confirm that the WiFi is activated, and then proceed with operations on your phone.
6. Specifications
| Attribute | Value |
|---|---|
| Model | M500 Pro |
| Aperture | F=1.8 |
| Color | Black |
| OSD Language | Arabic, Chinese (Simplified), Chinese (Traditional), English, French, German, Italian, Japanese, Korean, Portuguese, Turkish |
| Memory Card | Micro SD Max 128GB |
| Video Code | H.264 |
| Photo Format | JPG |
| Video Format | MP4 |
| Display Size | 2.99 inch (3"-5") |
| Screen Ratio | 16:9 |
| Display Type | IPS |
| Touch Screen | No |
| Camera Resolution | 3840x2160 (4K+1K+1K for 3CH) |
| Pixels | 800Mega |
| Number Of Lenses | 3 |
| Rear Camera | Yes |
| WiFi | 2.4G WiFi |
| Power Interface | Type-C, 5V/1.5A (Corded electric) |
| Working Temperature | -20℃ to 60℃ |
| Memory Card Required Reading Speed | Class 10 |
| Max External Memory | 128G |
| Built-in Screen | Yes |
| Loop-Cycle Recording Feature | Yes |
| Audio Recorded | Yes |
| NightShot Function | Yes |
| Original Package | Yes |
| Is Batteries Included | No |
| Special Features | G-Sensor, SD/MMC card, WiFi function, Voice Control, Parking Monitor |
| GPS logger | NONE |
| Assembly Mode | Portable Recorder |
| Chipset Manufacturer | Allwinner |
| Frames Per Second | 25 |
| Item Type | Car DVR |
| Certification | CE, FCC, RoHS, WEEE |
| Interface | USB 2.0, SD/MMC, Wi-fi, Micro SD/TF |
7. Maintenance
- Micro SD Card Formatting: It is crucial to format your microSD card before first use and periodically to ensure optimal recording performance and prevent errors. If the dash cam displays a "Memory Error," try formatting the card via the dash cam's settings (long press power button for 6 seconds) or using a computer. Remember to back up any important data before formatting.
- Lens Cleaning: To ensure clear video quality, regularly clean the camera's lens and your car's windshield. Use a soft, lint-free cloth and a gentle cleaning solution if necessary, to remove any dirt, dust, or grease.
- Firmware Updates: Keep your dash cam's firmware updated to the latest version. Firmware updates can resolve compatibility issues, improve performance, and add new features. Check the AZDOME app or website for available updates.
8. Troubleshooting
If you encounter any issues with your AZDOME M500 dash cam, refer to the following table and FAQs for solutions.
8.1. Common Issues & Solutions
| Issue | Solution |
|---|---|
| Device won't power on | Check power cable, car charger indicator, and ensure that you are using a standard car charger. Try a smartphone Type-C charging cable to power the dashcam. If it doesn't turn on, press the Power button once. If still no response, remove the memory card and try restarting. Use the RESET button (located at the bottom) with a pen tip or paperclip. |
| Video playback lag | Use a compatible player or adjust resolution. If playing on PC, high bitrate files might cause lagging; try recording at a lower resolution. |
| Horizontal stripes on image | Set incorrect light frequency. Adjust to 50Hz/60Hz based on your region. |
| WiFi not found | Verify WiFi is enabled on the dash cam (check screen icon). Manually enable WiFi on the dash cam if needed. |
| Camera Displays "Memory Error" or "Please Insert Micro SD Card" | Confirm Micro SD Card Specifications (Class 10, U3 minimum). Power off, remove, check for damage/dirt, and reinsert the card firmly. Format the Micro SD Card via the dash cam or computer (back up data first). Ensure your camera has the latest firmware. |
| Video is Fuzzy | Clean the camera's lens and windshield. If cleaning doesn't help, it might be a manufacturing defect; contact support. |
| Camera Gets HOT | Normal operation: It's expected for the camera to feel hot (operating temperature -20℃ to +60℃). If excessively hot, discontinue use and contact support. |
| Dashcam Turns On/Off Automatically | Perform a reset on the dashcam and update the firmware. If the issue persists, ensure your car's cigarette lighter socket is not always hot (see Power On/Off section). |
| Date/Time Always Changes | Adjust Time Zone: Go to the camera's system settings (via the app) and set the correct time zone. |
| Oldest Video Files Missing | This is due to the Loop Recording feature. When the memory card is full, the camera automatically overwrites the oldest files with new ones to ensure continuous recording. |
9. User Tips
- Optimal SD Card Usage: Always use a high-quality Class 10, U3, A2 microSD card (up to 128GB) and format it regularly to prevent recording errors and ensure smooth operation.
- Parking Monitor Power: For reliable 24-hour parking monitoring, consider installing a 3-Lead Hardwire Kit. This ensures continuous power supply even when the vehicle is off, which is not always provided by standard cigarette lighter sockets.
- App Connectivity: When using the AZDOME app, remember that the dash cam's WiFi provides a direct connection for file transfer and settings adjustment, but it does not provide internet access to your phone. Stay within 10 feet of the dash cam for a stable connection.
- Date and Time Sync: If your dash cam's date and time are incorrect, connect it to the AZDOME app. The app will automatically update the date/time based on your phone's settings.
10. Warranty & Support
The AZDOME M500 comes with a 1-year warranty. For any product-related inquiries, technical support, or warranty claims, please contact AZDOME customer service.
Email: service@azdomevip.com
Phone: 1- (833) 6675545 (English support only)
- Mon-Fri: 9 AM - 9 PM PT
- Sat-Sun: 9 AM - 6 PM PT
Web: www.azdomevip.com
You can also find us on social media:
- Instagram: @azdome_official
- YouTube: @azdome
- TikTok: @azdome_official
- Reddit: @azdome_official
- Twitter: @AzdomeGlobal
11. Compliance Notices
CE Compliance
This product complies with the radio interface requirements of the European Community.
WEEE Directive
This symbol indicates that the product must not be discarded as household waste and should be delivered to an appropriate collection point for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
FCC Compliance
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.