1. Introduction
The FMART T11 is an advanced window cleaning robot designed to automate the cleaning of various glass surfaces. Featuring powerful suction, intelligent navigation, and an ultrasonic spray system, it provides efficient and streak-free cleaning for your home or office windows.

2. Safety Information
Please read all safety instructions carefully before using the FMART T11 Window Cleaning Robot to ensure safe operation and prevent damage.
- Ensure the robot is always connected to a power source during operation. The built-in UPS is for emergency power loss only.
- Always attach the safety rope securely to an indoor anchor point before placing the robot on the window.
- Do not use the robot on cracked or damaged glass surfaces.
- Keep hands, hair, and loose clothing away from moving parts.
- Do not allow children or pets to operate or play with the robot.
- Use only the provided power adapter and accessories.
- Do not immerse the robot in water or other liquids.
- Store the robot in a cool, dry place when not in use.
3. Package Contents
Verify that all items are present in the package:
- 1 x Main Body (FMART T11 Robot)
- 1 x Power Plug
- 1 x Adapter
- 1 x Power Cord (20.34 feet / 4m extra-long)
- 1 x Safety Rope (4m with 1393N load capacity)
- 1 x Water Filling Bottle
- 1 x Remote Control
- 1 x User Manual
- 12 x Cleaning Cloths

4. Product Overview and Features
The FMART T11 is designed for efficient and thorough window cleaning with the following key features:
- 4-Way Ultrasonic Spray: Intelligent atomization system for even mist distribution and enhanced stain removal.
- 100ml Large Water Tank: Cleans up to 60 square meters on a single refill.
- Ultra-Slim 60mm Design: Allows access to narrow gaps and corners.
- Smart Control: Operable via 2.4GHz wireless remote control or a dedicated smartphone app (iOS/Android) with voice guidance and 10 language support.
- Powerful 5300Pa Suction: Ensures firm adhesion to glass surfaces for stable cleaning.
- Triple Safety Protection: Includes a built-in 20-minute UPS for power outages and a 4m safety rope with 1393N load capacity.
- Enhanced Cleaning Speed: Achieves 2.36 inches per second.
- Versatile Cleaning: Suitable for glass, marble, tiles, mirrors, and wooden doors.
- Multiple Cleaning Modes: Quick Clean, Deep Clean, and Spot Clean.




5. Setup Guide
5.1 Attaching Cleaning Pads
- Ensure the robot is powered off.
- Attach two clean cleaning cloths to the rotating discs on the underside of the robot. Ensure they are securely fastened and cover the entire disc surface.
5.2 Filling the Water Tank
- Locate the water tank cap on the robot.
- Open the cap and use the provided water filling bottle to fill the 100ml tank with clean water or a recommended window cleaning solution. Do not overfill.
- Securely close the water tank cap.

5.3 Connecting Power and Safety Rope
- Connect the power cord to the robot and then to the adapter.
- Plug the adapter into a power outlet.
- Attach one end of the safety rope to the designated anchor point on the robot.
- Secure the other end of the safety rope to a sturdy indoor fixture (e.g., a heavy piece of furniture, window frame) to prevent accidental falls.
5.4 Initial Placement and Power On
- Hold the robot firmly against the window surface.
- Press and hold the power button on the robot until it powers on and adheres to the glass with suction.
- Release the robot slowly to ensure it is securely attached.
5.5 App Download and Pairing (Optional)
- Download the FMART app from your smartphone's app store (iOS/Android).
- Follow the in-app instructions to pair your smartphone with the FMART T11 robot via Bluetooth or Wi-Fi.
6. Operating Instructions
The FMART T11 can be controlled via the onboard button, remote control, or smartphone app.

6.1 Starting a Cleaning Cycle
- One-Click Start: Press the power button on the robot once to begin an automatic cleaning cycle.
- Remote Control: Use the "Start/Pause" button on the remote control.
- Smartphone App: Select a cleaning mode and press "Start" in the app interface.
6.2 Cleaning Modes
The robot offers three distinct cleaning modes:
- Quick Clean: A single pass for light dirt and maintenance cleaning.
- Deep Clean: Two passes over the surface for more thorough cleaning of stubborn stains.
- Spot Clean: Focuses on a specific area for intensive cleaning.

6.3 Using the Ultrasonic Spray
The T11 features an automatic 4-way ultrasonic spray system. You can also manually control the spray via the remote or app.
- Auto Spray: The robot will automatically spray during cleaning.
- Manual Spray: Use the dedicated spray buttons on the remote control or within the app to activate or deactivate the spray.

6.4 Remote Control and App Functions
The remote control and app provide comprehensive control over the robot:
- Real-time Control: Manually steer the robot's movement.
- Cleaning Mode Selection: Choose between Quick, Deep, or Spot Clean.
- Spray Settings: Adjust or toggle the ultrasonic spray.
- Voice Control: Control sound and switch between 10 supported languages.
- OTA Updates: Receive over-the-air firmware updates for improved performance (via app).

6.5 Ending a Cleaning Cycle and Retrieval
When a cleaning cycle is complete, the robot will automatically return to its starting point (Memory Point). You can also manually stop it:
- Press the "Stop" button on the remote or in the app.
- Carefully grasp the robot and pull it away from the window surface.
- Power off the robot by pressing and holding the power button.
7. Maintenance
7.1 Cleaning Pads
- After each use, remove the cleaning cloths from the robot.
- Wash the cloths with water and mild detergent. They are reusable.
- Ensure cloths are completely dry before reattaching for the next use.
7.2 Water Tank
- Empty any remaining water from the tank after each cleaning session.
- Rinse the tank with clean water periodically to prevent residue buildup.
- Do not use corrosive cleaning agents in the water tank.
7.3 Robot Body
- Wipe the exterior of the robot with a soft, dry cloth.
- Ensure the suction ports and sensors are free from dust and debris.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not adhere to the window. |
|
|
| Robot leaves streaks. |
|
|
| Robot is not spraying. |
|
|
| App cannot connect to the robot. |
|
|
9. Specifications
| Feature | Detail |
|---|---|
| Brand | FMART |
| Type | Window Cleaning Robot |
| Model Number | T11 |
| Color | White |
| Shape | Round |
| OTA Update | Yes |
| Cleaning Mode | Inter-rotational Movement Zigzag Route (Quick Clean, Deep Clean, Spot Clean) |
| Auto-spray System | Quadruple, 4-Way Ultrasonic |
| Nozzle Type | Ultrasonic |
| Removable Water Tank Capacity | 100ml |
| APP Smartphone Controlled | iOS/Android |
| Voice Prompt | Yes (10 languages) |
| Power | 72W |
| Battery Capacity | 750mAh (20min UPS backup) |
| Suction Power | 5300Pa |
| Cleaning Speed | 2.36 in/s (4.1 min/m² for T11) |
| Noise Level | < 60 dB |
| Max Cleaning Area per Fill | 60 m² (538 sq. ft.) |
| Product Weight | 1kg |
| Package Weight | 2.32kg |
| Product Size (L x W x H) | 292 × 144 × 58mm (Ultra-Slim 60mm thickness) |
| Package Size (L x W x H) | 340 × 286 × 128mm |
| Power Cord Length | 4m (20.34 feet) |
| Safety Rope Length | 4m (1393N load capacity) |
| Voltage | 220V-240V |
| Certification | CE |
| Origin | Mainland China |

10. User Tips
- For best results, pre-clean extremely dirty windows to remove loose debris before using the robot.
- Use distilled water or a recommended window cleaning solution to prevent water spots and nozzle clogging.
- Regularly check the safety rope for wear and tear, especially when cleaning high-rise windows.
- If the robot struggles with adhesion, ensure the cleaning pads are not overly saturated and the window surface is not excessively wet.
- Take advantage of the app's language settings for voice prompts in your preferred language.
11. Frequently Asked Questions (FAQ)
- Q: How long does the battery last during a power outage?
- A: The built-in UPS system provides up to 20 minutes of backup power to keep the robot secured to the window during a power outage, allowing time for safe retrieval.
- Q: Can I use any cleaning solution in the water tank?
- A: It is recommended to use clean water or a mild, non-foaming window cleaning solution specifically designed for robots. Avoid corrosive or highly concentrated solutions that could damage the nozzles or internal components.
- Q: How often should I change the cleaning pads?
- A: The cleaning pads are reusable and washable. They should be cleaned after each use. Replace them when they show significant wear or no longer clean effectively.
- Q: What types of surfaces can the FMART T11 clean?
- A: The robot is primarily designed for glass windows but can also be used on other smooth surfaces such as marble, tiles, mirrors, and wooden doors.
12. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.