Midea EU-KFR26G/N1Y-AE (MZZ) 17122000041196

Contents

Midea Air Conditioner WIFI Display Receiver User Manual

Model: EU-KFR26G/N1Y-AE (MZZ) 17122000041196

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Midea Air Conditioner WIFI Display Receiver. This device enables wireless control and monitoring of your compatible Midea air conditioning unit, enhancing convenience and smart home integration.

2. Package Contents

Please verify that all the following components are included in your package:

  • Display Board (A-1 or A-2)
  • USB WIFI Module (B) - labeled NetHome Plus EU-OSK105
  • USB Cable (C)
  • Data Cable Connection (D)
Components of the Midea Air Conditioner WIFI Display Receiver (Model A-1)
Figure 1: Components of the Midea Air Conditioner WIFI Display Receiver (Model A-1). A-1: Display Board, B: USB WIFI Module, C: USB Cable, D: Data Cable Connection.

3. Product Overview

The WIFI Display Receiver consists of several key components designed to integrate seamlessly with your Midea air conditioner:

  • Display Board (A-1/A-2): This is the main control board featuring a digital display for status and error codes, and connection ports for the USB WIFI module and data cable.
  • USB WIFI Module (B): A compact USB dongle that provides wireless connectivity to your home network, enabling remote control via a smartphone application.
  • USB Cable (C): Connects the USB WIFI module to the display board.
  • Data Cable Connection (D): Used to connect the display board to the main control board of your air conditioning unit.

4. Setup Instructions

Follow these steps to install your Midea Air Conditioner WIFI Display Receiver:

  1. Prepare the Components: Ensure you have all components listed in Section 2.
  2. Connect USB WIFI Module: Carefully insert the USB WIFI Module (B) into the USB Cable (C).
  3. Connect to Display Board: Plug the other end of the USB Cable (C) into the designated USB port on the Display Board (A-1).
  4. Connect Data Cable: Attach the Data Cable Connection (D) to the corresponding port on the Display Board (A-1).
  5. Assemble into Housing (if applicable): If your air conditioner has a specific housing or slot for this module, carefully place the assembled display board, USB WIFI module, and USB cable into it.
  6. Connect to Air Conditioner: Locate the appropriate port on your Midea air conditioner's main control board and connect the other end of the Data Cable Connection (D). Refer to your air conditioner's main manual for the exact location.
  7. Power On: Once all connections are secure, power on your air conditioner. The display receiver should power up automatically.
Assembled Midea Air Conditioner WIFI Display Receiver (Model A-1)
Figure 2: Assembled Midea Air Conditioner WIFI Display Receiver (Model A-1) ready for installation.

5. Operating Instructions

After successful installation, the WIFI Display Receiver enables smart control of your air conditioner:

  1. Download the App: Download the 'NetHome Plus' application from your smartphone's app store (available for iOS and Android).
  2. Register/Log In: Open the app and follow the on-screen instructions to register a new account or log in if you already have one.
  3. Add Device: In the app, select the option to 'Add Device' or 'Add Air Conditioner'.
  4. Connect to WIFI: Follow the app's instructions to connect your WIFI Display Receiver to your home's wireless network. This typically involves putting the module into pairing mode and entering your WIFI credentials.
  5. Control Your AC: Once connected, you can use the NetHome Plus app to control your Midea air conditioner remotely, including adjusting temperature, fan speed, mode, and setting schedules.

6. Maintenance

To ensure optimal performance and longevity of your WIFI Display Receiver, consider the following maintenance tips:

  • Keep Clean: Periodically wipe the display board and module with a soft, dry cloth to remove dust. Avoid using liquid cleaners directly on the electronic components.
  • Check Connections: Ensure all cables (USB and Data Cable) remain securely connected to prevent intermittent operation.
  • Avoid Moisture: Keep the module away from water and high humidity environments.
  • Software Updates: Regularly check the NetHome Plus app for any available firmware updates for the WIFI module to ensure compatibility and access to new features.

7. Troubleshooting

If you encounter issues with your WIFI Display Receiver, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Display board not lighting upLoose power connection or faulty unit.Check if the data cable is securely connected to both the display board and the AC unit. Ensure the AC unit has power.
Cannot connect to WIFI via appIncorrect WIFI password, module not in pairing mode, or router issues.Double-check your WIFI password. Ensure the module is in pairing mode as per app instructions. Restart your router and try again. Ensure your phone is connected to a 2.4GHz WIFI network during setup.
Air conditioner not responding to app commandsModule not properly connected to AC unit, or app/firmware issue.Verify the Data Cable Connection (D) is firmly attached to the AC unit's main board. Restart the app. Check for app or module firmware updates.
Error code (e.g., EH 06) displayed on AC unit after installationThe error may originate from the main air conditioner unit, not the WIFI display receiver.Consult your air conditioner's main user manual for specific error code meanings and troubleshooting steps. The WIFI display receiver primarily provides connectivity, not core AC functionality.

8. Specifications

FeatureDetail
Model Number17122000041196
TypeAir Conditioning Fitting, Air Conditioner Parts
ApplicationHome
CertificationCE
OriginMainland China
ElectricNo (refers to the module itself, not the AC unit)
High-concerned chemicalNone
Package Dimensions (L x W x H)25 cm x 15 cm x 8 cm
Package Weight0.5 kg

9. User Tips

  • Compatibility Check: Always verify the compatibility of this WIFI display receiver with your specific air conditioner model before purchase and installation. Some users have reported compatibility with systems like DILOC Frozen 24.
  • Main Unit Diagnostics: If your air conditioner displays an error code after installing this module, remember that the issue might be with the main AC unit itself, not the newly installed WIFI receiver. Consult your air conditioner's primary manual for diagnostic information.
  • Secure Packaging: The product is typically shipped well-packaged and protected, ensuring safe arrival.

10. Warranty and Support

For warranty information, technical support, or any inquiries regarding your Midea Air Conditioner WIFI Display Receiver, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.