HGLRC Draco HD VTX System

Contents

HGLRC Draco HD VTX System Instruction Manual

Model: Draco HD VTX System

Brand: HGLRC

1. Introduction

The HGLRC Draco HD VTX System is a high-performance 5.8G 1W digital FPV video transmission system designed for long-range drone racing and flight. It features a dual-antenna receiving system, high-definition video transmission, and compatibility with mainstream flight controllers. This manual provides essential information for the proper setup, operation, and maintenance of your Draco HD VTX System.

Video: HGLRC Draco HD VTX System overview.

2. Safety Information

  • Always ensure correct polarity when connecting power to avoid damage.
  • Operate the VTX system within its specified voltage range (8-36V for Air Unit/Ground Unit, 8-30V for VTX/Receiver).
  • Avoid touching the VTX module during operation as it may become hot.
  • Ensure antennas are properly connected before powering on the VTX to prevent damage to the transmitter.
  • Keep the system away from water, moisture, and extreme temperatures.
  • This product is recommended for users aged 14 and above.

3. Package Contents

The HGLRC Draco HD VTX System package typically includes the following components:

  • HGLRC Draco Ground Unit
  • HGLRC Draco Air Unit (A1 Pro or A2 Pro, depending on version)
  • FPV Camera (A1 Camera or A2 Camera, depending on version)
  • Antennas (Dual transmit, dual receive)
  • Connection Cables (e.g., SH1.0-6pin cable)
  • Adapter Bracket (for A1 Pro Air Unit)
  • Mounting Screws and hardware
HGLRC Draco HD VTX System components

Image: Contents of the HGLRC Draco HD VTX System package.

4. Specifications

HGLRC Draco HD VTX System features and specifications

Image: Key features and specifications of the Draco HD VTX System.

HGLRC Draco HD VTX System Specifications
Feature Specification
Model Draco A1 (Standard Edition) / Draco A2 (Enhanced Night Vision Edition)
Video Transmission High-Definition, 1080P, 60FPS HFR, 60MS Latency
Range Up to 15km+ (with dual-antenna receiving system)
Power Supply (VTX & Receiver) 8-30V
Air Unit Power Supply 8-36V
Ground Unit Power Supply DC Interface 8-36V
Flight Controller Compatibility Betaflight / INAV (MSP OSD Data)
OSD Data All-Scenario OSD Data, layout on flight screen via ground station
Ground Unit Video Output HDMI Interface
Air Unit Interface SH1.0-6pin
Antenna Dual transmit, dual receive
Air Unit Dimensions 32mm x 32mm x 10mm
Air Unit Mounting Hole Spacing 20mm / 25.5mm
Air Unit Weight (A1 Pro with adapter) ~30g
Air Unit Weight (A2 Pro) ~36g
Ground Unit Dimensions 70mm x 100mm x 20mm
Ground Unit Weight ~75g
Camera FOV 160°
A1 Camera Mounting Hole Spacing 14mm (single hole fixing)
A2 Camera Mounting Hole Spacing 19mm (6.5mm screw hole spacing)
Adapter Bracket (for A1) 16mm screw hole spacing (same as O4PRO), weight ~4g
Material Composite Material
Recommended Age 14+ years
Use Vehicles & Remote Control Toys, Helicopters

5. Components Overview

5.1 Air Unit (A1 Pro / A2 Pro)

The Air Unit is the drone-mounted video transmitter and receiver module. It comes in two main versions:

  • A1 Pro Air Unit (Standard Edition): Total weight with adapter is approximately 30g.
  • A2 Pro Air Unit (Enhanced Night Vision Edition): Total weight is approximately 36g.

Both Air Units share common dimensions and mounting hole spacing:

  • Dimensions: 32mm x 32mm x 10mm
  • Mounting Hole Spacing: 20mm / 25.5mm
  • Interface: SH1.0-6pin for connection to the Flight Controller.
A1 PRO Air Unit dimensions and camera details

Image: Dimensions and details for the A1 PRO Air Unit and A1 Camera. Note the 14mm camera mounting hole spacing.

A2 PRO Air Unit dimensions and camera details

Image: Dimensions and details for the A2 PRO Air Unit and A2 Camera. Note the 19mm camera mounting hole spacing.

5.2 FPV Camera

The system includes a dedicated FPV camera with a 160° FOV. The camera type depends on the chosen Air Unit version:

  • A1 Camera: Features a 14mm mounting hole spacing with single-hole fixing. A 14mm to 20mm converter bracket is included with the product.
  • A2 Camera: Features a 19mm mounting hole spacing with 6.5mm screw hole spacing.
Comparison of A1 and A2 cameras

Image: Visual comparison of the A1 and A2 cameras.

5.3 Ground Unit

The Ground Unit is the receiving station for the video signal, typically connected to an FPV monitor or goggles. It features:

  • Dimensions: 70mm x 100mm x 20mm
  • Weight: Approximately 75g
  • Power Supply: DC Interface 8-36V
  • Video Output: HDMI Interface
Ground Unit dimensions

Image: Dimensions of the HGLRC Draco Ground Unit.

6. Setup

6.1 Air Unit Installation

  1. Mounting: Secure the Air Unit to your drone frame using the provided screws. The Air Unit supports 20mm or 25.5mm mounting hole spacing.
  2. Camera Installation:
    • For A1 Camera: Mount the camera using its 14mm mounting hole spacing. If your frame requires 20mm spacing, use the included 14mm to 20mm converter bracket.
    • For A2 Camera: Mount the camera using its 19mm mounting hole spacing.
  3. Antenna Connection: Carefully connect the dual antennas to the Air Unit. Ensure they are securely fastened to prevent signal loss.
  4. Wiring to Flight Controller: Connect the Air Unit to your drone's Flight Controller (FC) using the SH1.0-6pin cable. Refer to your FC's manual for specific wiring diagrams. Ensure power (8-36V) and data lines are correctly connected.

6.2 Ground Unit Setup

  1. Power Connection: Connect the Ground Unit to a power source (8-36V DC) using the appropriate DC interface cable.
  2. Antenna Connection: Attach the receiving antennas to the Ground Unit.
  3. Video Output: Connect the Ground Unit to your FPV goggles or monitor via the HDMI interface.

6.3 Flight Controller Configuration

The Draco HD VTX System supports OSD data via Betaflight and INAV (MSP OSD Data). Connect the Air Unit's data lines to the appropriate UART on your Flight Controller and configure the OSD settings in your FC software (e.g., Betaflight Configurator) to display flight information on your FPV feed.

7. Operation

  1. Power On: Power on your drone (with the Air Unit installed) and then power on your Ground Unit and FPV goggles/monitor.
  2. Video Feed: The Ground Unit should automatically receive the high-definition video feed from the Air Unit.
  3. OSD Display: If configured, OSD data (e.g., battery voltage, flight time) will be overlaid on your video feed.
  4. Long Range Flight: The system is designed for long-range transmission up to 15km+. Always operate within legal limits and maintain visual line of sight where required.

8. Maintenance

  • Cleaning: Keep the Air Unit, Ground Unit, and camera lenses clean from dust and debris. Use a soft, dry cloth.
  • Antenna Care: Regularly check antenna connections for tightness and inspect for any damage. Damaged antennas can significantly reduce range and video quality.
  • Firmware Updates: Check the HGLRC official website periodically for any firmware updates for your Draco HD VTX System. Follow the manufacturer's instructions carefully for any update procedures.
  • Storage: Store the system in a dry, cool place when not in use.

9. Troubleshooting

9.1 No Video Feed

  • Check all power connections to both the Air Unit and Ground Unit.
  • Ensure antennas are securely connected to both units.
  • Verify the HDMI cable connection between the Ground Unit and your display device.
  • Confirm that both units are powered on and functioning.

9.2 Poor Video Quality / Short Range

  • Inspect antennas for damage or loose connections.
  • Ensure there are no obstructions between the Air Unit and Ground Unit during flight.
  • Check for sources of interference in your operating environment.
  • Verify that the Air Unit is receiving adequate power.

9.3 OSD Not Displaying

  • Confirm that the Air Unit's data lines are correctly connected to the Flight Controller's UART.
  • Check your Flight Controller software (Betaflight/INAV) to ensure MSP OSD is enabled and configured correctly.

10. User Tips

  • For optimal performance, ensure clear line-of-sight between the drone and the ground station.
  • Experiment with antenna placement on your drone to minimize signal blockage from carbon fiber or other components.
  • Always perform a range check in a safe environment before long-distance flights.
  • Consider using a dedicated power filter for the Air Unit if you experience noise in your video feed.

11. Warranty and Support

For warranty claims, technical support, or further assistance, please contact your retailer or the official HGLRC support channels. Keep your proof of purchase for warranty validation.

© 2024 HGLRC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.