PaiPaitek PD513-TIO

Contents

PaiPaitek AI Dog Training Collar User Manual

Model: PD513-TIO

Brand: PaiPaitek

1. Introduction and Overview

The PaiPaitek AI Dog Training Collar (Model: PD513-TIO) is a versatile 2-in-1 device designed for effective dog training and automatic bark control. It features a 3-channel remote control, allowing you to manage up to three dogs simultaneously. The collar offers multiple training functions including beep, vibration, and safe shock, suitable for various training scenarios both indoors and outdoors, day or night. Its intelligent design incorporates a lighting system for night visibility and an advanced bark recognition chip for accurate and safe operation.

PaiPaitek AI Dog Training Collar remote and two collars
Figure 1: Remote control and two receiver collars.

2. Package Contents

Upon unboxing your PaiPaitek AI Dog Training Collar, please ensure all components are present:

  • Remote Transmitter
  • Receiver Collar(s) (1, 2, or 3 depending on your purchase)
  • Adjustable Nylon Collar Strap(s)
  • USB Charging Cable (often a 2-in-1 or 3-in-1 cable for simultaneous charging)
  • Contact Points (short and long sets)
  • Conductive Silicone Caps for Contact Points
  • Test Light Tool
  • User Manual (this document and a physical copy)
Unboxed contents of the dog training collar, including remote, collar, charging cable, and contact points.
Figure 2: Typical package contents laid out.

3. Specifications

FeatureSpecification
Model NumberPD513-TIO
Brand NamePaiPaitek
Item TypeTraining Collars
Target PetDog (5 to 150 lbs)
Collar LengthAdjustable 6-26 inches (can be cut)
MaterialPlastic
Water Resistance LevelIPX7 (Receiver Collar)
Remote RangeUp to 3300 feet (1000 meters)
Battery TypeLithium (Model: 602030)
Rated Voltage3.7V
Rated Capacity300mAh, 1.11Wh
Charging TimeApprox. 2 hours
Remote Standby TimeUp to 180 days
Receiver Standby TimeUp to 40 days
Bark Control Sensitivity5 adjustable levels
Beep Levels9 types
Vibration Levels1-16 levels
Safe Shock Levels1-99 levels

4. Safety Information

  • This training collar is intended for dogs weighing between 5 to 150 lbs.
  • Do not leave the collar on your dog for more than 12 hours a day.
  • Regularly check your dog's neck for any signs of irritation or sores from the contact points.
  • Always start with the lowest stimulation levels (beep or vibration) and only use static shock as a last resort, at the lowest effective level.
  • The receiver collar is IPX7 waterproof, but the remote control is NOT waterproof. Keep the remote away from water.
  • The collar features a security on/off switch to prevent accidental activation.
  • The automatic bark control function uses an advanced smart chip to accurately identify your dog's barking, minimizing accidental corrections.

5. Setup

5.1 Charging the Devices

  1. Connect the USB charging cable to the charging ports on both the remote transmitter and the receiver collar(s).
  2. Plug the USB cable into a standard USB power adapter (not included) or a computer USB port.
  3. The devices will fully charge in approximately 2 hours. An indicator light will show charging status (e.g., red for charging, green for fully charged).

5.2 Attaching Contact Points

  • Choose the appropriate length of contact points (short for short-haired dogs, long for long-haired dogs) to ensure good skin contact.
  • Screw the contact points firmly onto the receiver collar.
  • Place the conductive silicone caps over the contact points for added comfort and to prevent direct metal-to-skin contact.

5.3 Adjusting the Collar Strap

  1. Thread the adjustable nylon strap through the receiver collar.
  2. Place the collar around your dog's neck. It should be snug enough for the contact points to touch the skin, but loose enough to allow two fingers to fit comfortably between the strap and your dog's neck.
  3. If the strap is too long, you can cut the excess part and seal the end with a lighter to prevent fraying.
Two dogs wearing adjustable collars, showing how to measure and cut the collar strap.
Figure 3: Proper collar fit and adjustment for dogs.

5.4 Pairing (if necessary)

Typically, the remote and collar(s) come pre-paired. If re-pairing is needed, consult the specific instructions in your physical manual. Generally, this involves turning on the receiver, then pressing and holding a pairing button on the receiver while simultaneously pressing a button on the remote.

6. Operating Instructions

6.1 Remote Control Functions

The remote control features a display and buttons for various functions:

  • Power Button: Turns the remote on/off.
  • Channel Button: Switches between channels (for 1, 2, or 3 dogs).
  • Mode Button: Cycles through training modes (Beep, Vibration, Shock).
  • Level Adjustment Buttons (Up/Down): Adjusts the intensity level for vibration (1-16) and shock (1-99).
  • Beep Button: Delivers an audible tone to the receiver.
  • Vibration Button: Delivers a vibrational stimulus to the receiver.
  • Shock Button: Delivers a static shock stimulus to the receiver.
  • Lighting System: Activates a light on the remote for night use.
Man training a dog with the collar, illustrating the 2-in-1 bark and training functions: Bark Collar, Beep, Vibration, Safe Shock.
Figure 4: Training functions and modes.

6.2 Receiver Collar Functions

  • Power Button: Turns the receiver on/off.
  • Positioning Light: A light on the collar strap helps locate your dog in the dark.
  • Automatic Bark Control: The collar automatically detects and corrects barking based on its sensitivity settings.
Dogs at night, highlighting the safety anti-lost light modes and reflective strips on the collar for high visibility.
Figure 5: Night visibility features.

7. Modes and Training Functions

7.1 Collar Modes

The collar offers three distinct modes:

  • Bark Control Mode: The collar acts as an automatic anti-barking device, responding to your dog's barks with pre-set corrections (beep, vibration, or shock). It has 5 adjustable sensitivity levels.
  • Dog Training Mode: Allows manual control of corrections (beep, vibration, shock) via the remote for specific training commands.
  • Night Training Mode: Utilizes the lighting system on the remote and the positioning light on the collar for enhanced visibility during nighttime training sessions.

7.2 Training Functions

The remote provides three primary training functions:

  • Beep: An audible tone with 9 adjustable types. Ideal for initial training and positive reinforcement.
  • Vibration: A tactile stimulus with 1-16 adjustable levels. Useful for getting your dog's attention or as a mild deterrent.
  • Safe Shock: A static electrical stimulus with 1-99 adjustable levels. Use with caution and at the lowest effective level for stubborn behaviors.
Dog with collar and remote, illustrating the 3300ft remote range and how the collar can address barking, chewing, chasing, and digging behaviors.
Figure 6: Remote range and behavior correction examples.

8. Charging and Battery Life

The remote and receiver collars are equipped with rechargeable lithium batteries (Model: 602030, 3.7V, 300mAh, 1.11Wh). A full charge takes approximately 2 hours. The remote can last up to 180 days on standby, while the receiver collar can last up to 40 days, depending on usage frequency.

9. Waterproofing

The receiver collar boasts an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This makes it suitable for use in various environmental conditions, including swimming, wet fields, baths, and rain. However, it is crucial to remember that the remote transmitter is NOT waterproof and should be kept dry at all times.

Dog swimming with the collar, demonstrating its IPX7 waterproof rating for activities like swimming, wet fields, bathing, and rain.
Figure 7: IPX7 waterproof receiver collar in action.

10. User Tips

  • Start Gentle: Many users find that vibration alone is sufficient to deter unwanted behaviors. Always begin with the lowest effective level for any correction.
  • Monitor Shock Levels: If using the static shock function, test it on yourself at level 99 to understand its intensity. Always use the lowest tolerable level for your dog.
  • Long Battery Life: The collar and remote offer excellent battery life, reducing the frequency of charging.
  • Adjustable for Growth: The collar strap is adjustable and can be trimmed, making it suitable for dogs from puppyhood to adulthood (5-150 lbs).
  • Multi-Dog Management: The 3-channel remote is effective for managing multiple dogs, but be aware that if one dog barks, other dogs wearing collars on the same channel might also receive a correction.
  • Contact Point Care: Ensure contact points are securely screwed in. Be gentle when attaching them to avoid damage.

11. Troubleshooting

  • Collar Not Responding: Ensure both the remote and receiver collar are fully charged and powered on. Check if they are on the same channel.
  • Anti-Bark Function Not Working: The anti-bark function relies on an advanced smart chip to detect barking. Ensure the collar is fitted correctly with contact points touching the dog's skin. Adjust the sensitivity levels (1-5) to match your dog's barking intensity and environment.
  • Short Battery Life: Ensure devices are fully charged. Extreme temperatures or very frequent use of high-level corrections can reduce battery life.
  • No Stimulation Felt: Verify the contact points are making proper contact with your dog's skin. Use the test light tool to confirm the shock function is working.

12. Maintenance

  • Cleaning: Regularly clean the receiver collar and contact points with a damp cloth. Ensure they are dry before storage or next use.
  • Storage: Store the device in a cool, dry place when not in use.
  • Battery Care: For prolonged storage, charge the batteries to about 50% to maintain their health.
  • Strap Inspection: Periodically check the collar strap for wear and tear. Replace if damaged.

13. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please refer to the contact details provided with your purchase or on the manufacturer's official website. Keep your proof of purchase for warranty claims.

An additional user manual in PDF format is available for download: View User Manual (PDF)

© 2024 PaiPaitek. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.