Introduction
Thank you for choosing the KINSCOTER Smart Oscillating Desk Fan. This manual provides essential information for the safe and efficient use of your new fan. Please read it thoroughly before operation and keep it for future reference.
Your KINSCOTER fan is designed for optimal personal cooling with features like an intelligent digital display, flexible adjustment, customized wind modes, long-lasting battery life, quiet operation, and a convenient timing function.

Figure 1: KINSCOTER Smart Oscillating Desk Fan - Ultra Quiet with High Airflow (4.5m/s), 12 Hours Endurance, and 38dB Noise Level.
Safety Instructions
- Do not insert hands or any foreign objects into the air inlet or outlet to prevent accidents or product damage.
- Do not use this product in humid environments (e.g., bathrooms). Contact with water may cause product failure or damage.
- Do not disassemble, modify, or repair this product yourself.
- Do not charge the product with a voltage exceeding the specified 5V.
- Do not place the product into or near fire sources to avoid accidents and potential product damage.
- Store the product in a cool, dry place, out of reach of children.
Package Contents
Please check the package for the following items:
- 1 x KINSCOTER Smart Oscillating Desk Fan (KC-F17)
- 1 x USB Type-C Charging Cable
- 1 x User Manual
Product Overview

Figure 2: Fan Control Panel and Display
Control Panel Components:
- LCD Digital Display: Shows current fan speed, timer setting, and battery level.
- Timer Button (Left): Sets the automatic shut-off timer.
- Fan Button (Middle): Controls power on/off and fan speed.
- Oscillation Button (Right): Activates or deactivates the oscillating function.
- USB Type-C Charging Port: Located at the back of the base.

Figure 3: Fan Oscillation and Tilt Adjustment
The fan head can be manually tilted up or down by up to 60 degrees for direct airflow. The fan also features a 120-degree automatic oscillation for wider coverage.
Setup
- Unpacking: Carefully remove all components from the packaging.
- Placement: Place the fan on a stable, flat surface. Ensure there are no obstructions to the air inlet or outlet.
- Initial Charge: For first-time use, it is recommended to fully charge the fan. Connect the USB Type-C cable to the charging port on the back of the fan base and plug the other end into a 5V/2A USB power adapter (not included). The display will show charging status.
Operating Instructions
- Power On/Off and Speed Adjustment:
- Short press the Fan Button (middle) to turn on the fan. It will start at speed level 1 (F1).
- Press the Fan Button again to cycle through speed levels (F2, F3, F4, F5).
- After F5, pressing the Fan Button again will turn off the fan and reset the fan head to the center position.
- Alternatively, long press the Fan Button to power off directly.
- Battery Level Display:
- While the fan is operating, double-click the Fan Button to display the current battery percentage (01-100%).
- Timer Function:
- Short press the Timer Button (left) to activate the timer. The initial setting is 1 hour (1H).
- Press the Timer Button again to cycle through timer settings (2H, 4H, 6H).
- Press the Timer Button one more time to deactivate the timer.
- Oscillation Function:
- Short press the Oscillation Button (right) to turn on the 120° automatic oscillation.
- Press the Oscillation Button again to turn off the oscillation.
- When oscillation is active, if you long press the Fan Button to turn off the fan, the fan head will automatically return to the center position before powering down.
- Manual Tilt Adjustment:
- Gently adjust the fan head up or down to your desired angle (up to 60°).
Video 1: KINSCOTER Smart Oscillating Desk Fan Product Demonstration. Shows compact size, adjustable angle, one-touch power, LED display, oscillation, quiet operation, and automatic return to upright position.
Maintenance
- Cleaning the Fan Grille:
- Ensure the fan is turned off and unplugged before cleaning.
- To remove the front grille, gently rotate it counterclockwise until it unlocks.
- Wipe the grille and fan blades with a soft, damp cloth. Do not use abrasive cleaners or immerse the fan in water.
- To reinstall the grille, align it and rotate clockwise until it locks securely.
- General Cleaning:
- Wipe the exterior of the fan with a soft, dry cloth.
- Do not use chemical cleaners, as they may damage the surface.
- Storage:
- If storing the fan for an extended period, ensure it is clean and fully charged.
- Store it in a cool, dry place, away from direct sunlight.

Figure 4: Detachable Front Grille Design for Easy Cleaning
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | Battery is depleted. | Charge the fan using the provided USB Type-C cable. |
| Fan stops unexpectedly | Battery is low or timer function is active. | Check battery level and recharge if necessary. Deactivate timer if not desired. |
| Weak airflow | Fan speed is too low or grille is obstructed. | Increase fan speed. Clean the front grille and fan blades. |
| Unusual noise during operation | Fan blades or motor may be obstructed. | Turn off the fan, unplug it, and check for any obstructions in the blades or grille. |
| Oscillation not working | Oscillation function is not activated. | Press the Oscillation Button to activate. |
Specifications

Figure 5: Product Dimensions and Parameters
| Parameter | Value |
|---|---|
| Product Model | KC-F17 |
| Rated Input | DC 5.0V / 2.0A |
| Rated Power | 1.25W - 6W |
| Battery Capacity | 4000mAh |
| Charging Time | Approx. 3.5 hours |
| Product Weight | 450g |
| Product Dimensions | 170 x 135 x 292 mm (6.69 x 5.31 x 11.5 inches) |
| Product Material | ABS/PC/SUS/Electronic Components |
| Fan Speed Levels | 5 |
| Oscillation Angle | 120° (Automatic) |
| Tilt Adjustment | 60° (Manual) |
| Timing Function | 1H, 2H, 4H, 6H |
| Certifications | CE, RoHS |
User Tips
- For quiet operation, speeds 1 and 2 are often sufficient and provide a refreshing breeze.
- To maximize battery life, use lower fan speeds. At speed 1 with oscillation, the fan can last over 6 hours, and without oscillation, it can exceed 14 hours.
- The fan head automatically returns to the center position when turned off after oscillation, which is a convenient feature.
- While the fan is operating, double-click the middle (Fan) button to quickly check the remaining battery percentage.
- The fan can be used while charging, but for optimal battery health, avoid continuous use while plugged in for extended periods.
- Note that the fan's height is fixed and cannot be adjusted, nor can it be folded or fully separated from its base.
Frequently Asked Questions (FAQ)
- Q: What type of USB connection does it have?
A: The fan uses a USB Type-C connection for charging. - Q: How many inches is the fan?
A: The fan head diameter is approximately 6.7 inches (170mm). The overall dimensions are 170 x 135 x 292 mm.
Warranty and Support
KINSCOTER products are manufactured with high-quality standards. For any issues or support inquiries, please contact your retailer or KINSCOTER customer service. Please have your model number (KC-F17) and purchase details ready.
For the most up-to-date information and support, please refer to the official KINSCOTER website or contact their customer service directly.