1. Introduction
This manual provides detailed instructions for the operation, maintenance, and care of your SMAEL 8140 Men's Business Sport Quartz Watch. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch. The SMAEL 8140 features a dual analog-digital display, 50M water resistance, chronograph, alarm, stopwatch, and LED night light, making it suitable for various daily and sports activities.
2. Watch Components and Button Functions
Familiarize yourself with the watch's buttons and display areas:

Figure 1: Functional Breakdown of SMAEL 8140 Watch
- A (LIGHT) Button (Top Left): Activates the EL backlight for 3 seconds.
- B (MODE) Button (Bottom Left): Cycles through different operational modes (Normal Time, Chronograph, Alarm, Time Setting).
- C (RESET) Button (Bottom Right): Used for resetting values, split timing in chronograph mode, and navigating settings.
- D (START/STOP) Button (Top Right): Used to start/stop functions, adjust values in setting modes, and switch 12/24H format.
- Crown (Right Side): Used to set the analog time.

Figure 2: Multi-Function Buttons
3. Setup and Initial Configuration
3.1 Setting Analog Time
- Pull out the crown on the right side of the watch.
- Rotate the crown to adjust the hour and minute hands to the desired time.
- Push the crown back in to start the analog timekeeping.
3.2 Setting Digital Time and Date
- From the Normal Time Display Mode, press the B (MODE) button three times to enter the Time and Date Setting Mode. The seconds will start flashing. Press D (START/STOP) to reset seconds to zero.
- Press the C (RESET) button. The hours will flash. Press D (START/STOP) to adjust the hour. Repeatedly pressing D will also toggle between 12-hour and 24-hour formats.
- Press C (RESET) again. The minutes will flash. Press D (START/STOP) to adjust the minutes.
- Press C (RESET) again. The month will flash. Press D (START/STOP) to adjust the month.
- Press C (RESET) again. The date will flash. Press D (START/STOP) to adjust the date.
- Press C (RESET) again. The day of the week will flash. Press D (START/STOP) to adjust the day.
- Press the B (MODE) button to exit the Time and Date Setting Mode and return to the Normal Time Display Mode.
3.3 Setting the Alarm
- From the Normal Time Display Mode, press the B (MODE) button twice to enter the Alarm Mode.
- Press the C (RESET) button. The alarm hour will flash. Press D (START/STOP) to adjust the alarm hour. Pay attention to AM/PM indicators if in 12-hour format.
- Press C (RESET) again. The alarm minutes will flash. Press D (START/STOP) to adjust the alarm minutes.
- Press the B (MODE) button to exit the Alarm Setting Mode.
3.4 Turning Alarm and Hourly Chime ON/OFF
- From the Normal Time Display Mode, press the B (MODE) button twice to enter the Alarm Mode.
- In Alarm Mode, press the D (START/STOP) button to toggle the Alarm (ALM) and Hourly Chime (SIG) functions ON or OFF.
- If the 'ALM' and/or 'SIG' symbols appear on the display, the respective function is active. If they are not displayed, the function is off.
4. Operating Instructions
4.1 Using the Chronograph (Stopwatch)
- From the Normal Time Display Mode, press the B (MODE) button once to enter the Chronograph Mode. The display will show '0:00:00'.
- Press the D (START/STOP) button to start the stopwatch.
- To pause the stopwatch, press the D (START/STOP) button again. To resume, press D (START/STOP) once more.
- To record a split time (lap time) while the stopwatch is running, press the C (RESET) button. The display will show the split time while the stopwatch continues to run in the background. Press C (RESET) again to return to the running stopwatch display.
- To stop the stopwatch completely, press the D (START/STOP) button.
- To reset the stopwatch to zero, press the C (RESET) button after stopping it.
- Press the B (MODE) button to exit Chronograph Mode and return to the Normal Time Display Mode.
4.2 Activating the LED Night Light
At any time, in any mode, press the A (LIGHT) button to illuminate the digital display with a cold LED backlight for approximately 3 seconds. This feature allows for clear readability in low-light conditions.

Figure 3: LED Night Light Display
5. Maintenance and Care
5.1 Water Resistance (50M / 5 Bar)
Your SMAEL 8140 watch is water-resistant to 50 meters (5 ATM), meaning it is suitable for daily use, such as washing hands, showering, and exposure to rain. It can be worn with confidence during these activities.

Figure 4: 50 Meter Water Resistance
Important Precaution: Do NOT operate any buttons while the watch is submerged in water or wet. This can compromise the water resistance and damage the internal components.
5.2 General Care
- Cleaning: Wipe the watch case and strap regularly with a soft, dry cloth to remove dirt and sweat. For the silicone strap, a mild soap solution and water can be used, followed by thorough drying.
- Avoid Chemicals: Do not expose the watch to strong chemicals, solvents, or detergents, as these can damage the case, strap, and seals.
- Temperature Extremes: Avoid exposing the watch to extreme temperatures (hot or cold) for prolonged periods, as this can affect battery life and accuracy.
- Impact: While the watch is designed to be shock-resistant, avoid severe impacts or drops to prevent damage to the internal movement or external components.

Figure 5: Seismic and Anti-Drop Measures
5.3 Battery Replacement
The watch uses a non-rechargeable battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly maintained.
6. Troubleshooting
If you encounter any issues with your SMAEL 8140 watch, please refer to the following common troubleshooting steps:
- Digital Display Blank/Dim: Check if the battery needs replacement. If recently replaced, ensure it was installed correctly.
- Buttons Unresponsive: Ensure the watch is not in a locked mode (if applicable, though not a feature on this model). Try pressing the buttons firmly. If still unresponsive, a reset might be needed (consult a technician).
- Incorrect Time/Date: Follow the setting instructions in Section 3.2 to re-adjust the digital time and date. For analog time, follow Section 3.1.
- Water Inside Watch: If moisture appears inside the watch, stop using it immediately and take it to a professional watch repair service. Do not attempt to open the watch yourself, as this will void any potential warranty and likely cause further damage.
7. Specifications

Figure 6: Product Parameters and Dimensions
| Feature | Specification |
|---|---|
| Brand Name | SMAEL |
| Model Number | 8140 |
| Display Type | Analog-Digital |
| Movement | Digital (Quartz + Electronics) |
| Case Material | Plastic |
| Case Shape | Round |
| Case Diameter | 53mm / 2.08 inch |
| Dial Diameter (Visible) | 46mm / 1.81 inch |
| Case Thickness | 18mm / 0.7 inch |
| Dial Window Material | Hardlex |
| Band Material Type | PU / Silicone Gel |
| Band Width | 22mm / 0.86 inch |
| Band Length | 23cm (approx. 130mm/80mm sections) |
| Wearing Range | 140mm - 230mm |
| Water Resistance Depth | 5Bar (50 Meters) |
| Clasp Type | Buckle |
| Net Weight | 73g |
| Battery Included | Yes |
| Rechargeable Battery | No |
| Voltage | <36V |
| Features | Shock Resistant, LED Display, Chronograph, Complete Calendar, Moon Phase, Alarm, Week Display, Night Display, Shatterproof, Chime at the Correct Time, 12/24 Hour System, Ultra Long Life |
| Certification | CE, RoHS |
8. User Tips
- To conserve battery life, avoid unnecessary use of the LED backlight.
- Regularly check the analog time against the digital time to ensure synchronization, especially after setting.
- If you travel frequently, remember to adjust the time zone for both analog and digital displays as needed.
- Keep the watch away from strong magnetic fields, which can affect its accuracy.
9. Warranty and Support
For detailed warranty information and further support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:
For any issues not covered in this manual, please contact SMAEL Official Store customer service.