YAXUN YX-2603

Contents

YAXUN YX-2603 Portable Microcomputer SMD Rework Station

Instruction Manual

Model: YX-2603 | Brand: YAXUN

1. Introduction

Welcome to the YAXUN YX-2603 Portable Intelligent Heat Gun. This product features an anti-static design and a high-precision intelligent temperature control circuit, offering a simple and convenient operation method that greatly facilitates your work process while effectively saving workspace. The unit is equipped with high-power heating elements, ensuring rapid temperature rise and excellent temperature recovery performance. The hot air rework station includes a high-speed, long-life brushless fan, delivering stable and ample airflow with gentle output, and the air volume can be adjusted as needed. The product incorporates an intelligent sleep mode: when the hot air temperature falls below 70°C, the device automatically enters energy-saving mode and can be awakened by operating the handle.

YAXUN YX-2603 Hot Air Gun on Stand

Figure 1: YAXUN YX-2603 Portable Microcomputer SMD Rework Station

2. Safety Precautions

Please read this manual carefully before use to ensure safe and proper operation.

  1. Ensure the electrostatic grounding wire is properly connected before use; failure to do so may result in serious issues.
  2. Do not insert metal objects or other foreign materials into the protective mesh at the air outlet. Doing so may damage the heating element and the device, or even cause electric shock.
  3. Do not tear off the anti-tamper label, as this will void the warranty.
  4. If the device malfunctions or becomes unusable, please contact the supplier or have it repaired by a professional. Non-professionals are strictly prohibited from opening the housing to prevent electric shock.
  5. Do not use the device near flammable gases, liquids, paper, or other combustible materials to avoid fire hazards.
  6. The air outlet and nozzles become extremely hot during use. Do not touch them, and do not direct the hot air toward the skin to prevent burns.
  7. Do not disassemble the handle assembly or drop or subject the device to impact, as this may damage the heating element or the main unit.
  8. After each use, always return the handle to the stand. This hot air rework station features an intelligent cooling function: simply place the handle on the stand, and the device will automatically cool down. When the temperature drops below 70°C, it will automatically enter energy-saving mode. Do not turn off the power switch or unplug the power cord while the device is cooling.
  9. The device still consumes some power in energy-saving mode. If not in use for an extended period, please turn off the main power switch at the rear of the device or unplug the power cord.

3. Product Features

Diagram illustrating five core characteristics of YAXUN YX-2603

Figure 2: Five Core Characteristics of YX-2603

  • Rapid Heating: Achieves desired temperatures quickly for efficient work.
  • Strong Wind Power: Provides powerful and stable airflow.
  • LCD Display: Clear digital screen for temperature and airflow readings.
  • Compact and Lightweight: Ergonomic design for comfortable and extended use.
  • Smart Sleep Mode: Automatically enters energy-saving mode when placed on the stand and temperature drops below 70°C.

4. Setup

4.1 Unboxing and Package Contents

Before starting, verify that all items are present in the package:

  • Portable Heat Gun: 1 unit
  • Heat Gun Stand: 1 unit
  • Nozzle Accessories: 3 units
  • User Manual (Including Warranty Card): 1 unit

4.2 Nozzle Installation

The YX-2603 is equipped with three nozzles for various applications. Installation is straightforward:

  1. Select the desired nozzle size for your task. A large-diameter nozzle is generally recommended for initial setup.
  2. Carefully attach the nozzle to the hot air gun's outlet. Ensure it is securely fitted.
  3. If changing nozzles during use, always allow the hot air gun to cool down to a safe temperature before handling to prevent burns.

Video 1: Demonstrates flexible angle adjustment of the holder and easy nozzle installation.

5. Operating Instructions

5.1 Panel Introduction

Close-up of YAXUN YX-2603 Hot Air Gun controls

Figure 3: Control Panel of YX-2603

  1. Temperature Display Screen
  2. Temperature Increase Button (A)
  3. Temperature Decrease Button (V)
  4. Setup / Power On-Off Button

5.2 Operating Procedure

  1. Connect the power supply and ensure the desired nozzle is installed.
  2. Turn on the power switch on the handle. The display will light up and begin heating.
  3. Set the desired temperature and airflow (refer to section 5.3). Once the displayed temperature reaches the set value, desoldering work can begin.
  4. After use, place the heat gun on its stand with the nozzle facing upward. The heat gun will automatically adjust the airflow to the maximum setting to cool down the heating element. When the temperature drops below 70°C, the heat gun enters standby mode, displaying "---" and stopping the airflow. To resume operation immediately, pick up the handle and turn the nozzle downward. Alternatively, press and hold the "Power On-Off" button for 3 seconds, release it when the temperature begins to drop, and the airflow will automatically switch to maximum for cooling. When the temperature drops below 70°C, the display turns off and the airflow stops. To reactivate operating mode from this state, press and hold the "Power On-Off" button for 3 seconds.
  5. When not in use for an extended period, turn off the main power switch or unplug the power cord.

5.3 Temperature and Airflow Adjustment

Temperature Adjustment: Press the "A" (Increase) and "V" (Decrease) buttons to adjust the temperature. Briefly press the "Setup" button to confirm and exit.

Airflow Adjustment: Briefly press the "Setup" button. When the fan icon begins to flash, the device has entered airflow adjustment mode. Press the "A" and "V" buttons to adjust the airflow level (levels 1-8). Briefly press the "Setup" button again to exit.

5.4 Fahrenheit/Celsius Switching

Press and hold the "Setup" and "A" buttons simultaneously for approximately 3 seconds. Release when the temperature unit icon (°C or °F) appears to cycle through the unit options.

5.5 Temperature Calibration

  1. Set the device to the commonly used temperature. After the temperature stabilizes, measure the actual temperature at the air outlet.
  2. Under normal operating conditions, press and hold the "Setup" and "V" buttons simultaneously. Release when "C" appears in the lower right corner of the screen to enter temperature calibration mode.
  3. Press the "A" and "V" buttons to input the actual temperature measured at the air outlet.
  4. Briefly press the "Setup" button to complete the calibration, exit temperature calibration mode, and return to normal operating mode.
  5. Measure the actual temperature again. If there is still a deviation, repeat the above steps.

6. Maintenance

6.1 Heating Element Replacement Method

If the heating element needs replacement, follow these steps:

  1. First, remove the anti-slip sleeve.
  2. Loosen the fixing screws in the four holes marked 1 and 3 (refer to Figure 4) by turning them counterclockwise, then open the handle assembly.
  3. After opening the handle assembly, desolder the leads of the heating element (Part 4).
  4. Carefully pull the heating element out of the metal tube of the soldering iron. Exercise care during extraction to protect the mica insulation layer inside the tube.
  5. Disconnect the connector between the heating element and the handle cable.
  6. Carefully install the new heating element, avoiding friction or applying excessive pressure during installation.
  7. Reassemble the handle in the reverse order of disassembly. During installation, ensure that the positioning hole of the metal tube aligns with the positioning post of the plastic handle component.
Internal structure diagram of the YAXUN YX-2603 hot air gun handle

Figure 4: Internal Structure for Heating Element Replacement

6.2 Precautions for Heating Element Replacement

  • If the heating element is damaged, it must be replaced with an original component from our factory. Failure to do so may result in abnormal equipment operation or damage to the main unit.
  • When soldering the heating element, correctly connect each lead terminal and pay attention to the polarity of the sensor lead terminals. The heating element has a total of four lead terminals: two are for the sensor (distinguished by the color of the sleeve: red for the sensor positive, black for the sensor negative), and the other two are for the heating wire (the heating wire leads have no polarity requirements).
  • When extracting the heating element from the metal tube, do not damage the mica insulation layer inside the metal tube of the soldering iron. Each time the heating element is replaced, carefully inspect the integrity of the mica insulation layer inside the tube. If damage is found, the insulation layer must be replaced before installing the new heating element; otherwise, it may result in a serious electric leakage accident.

7. Troubleshooting

No specific troubleshooting information is provided in the manual. For issues not covered in the operating instructions, please refer to the warranty and support section or contact customer service.

8. Specifications

Table of main parameters for YAXUN YX-2603

Figure 5: Main Parameters of YX-2603

FeatureSpecification
ModelYX-2603
Power750W
Input VoltageAC 220V/50Hz (also available in 110V)
DisplayLCD Digital Screen
Heating ElementCeramic Frame Heating Element
Temperature Range100-500°C / 212-932°F
Airflow TypeGentle Air Outlet
Airflow Volume≤120 L/min
Dimensions50x35x200mm
Gross Weight1KG

9. User Tips

No specific user tips were available from provided reviews or Q&A content.

10. Warranty and Support

10.1 Warranty Terms

This product is covered by a one-year free warranty from the date of purchase under normal use. During the warranty period, if a quality issue occurs, the user may present the warranty card to enjoy free repair services. Damage caused by improper use during the warranty period is not covered by the free warranty. If repairs are required, a nominal fee for parts and labor will be charged accordingly. Please keep your warranty card in a safe place. If the warranty card is lost, the company will not be able to provide warranty services.

10.2 Additional Resources

A detailed user manual in PDF format is available for download: YAXUN YX-2603 User Manual (PDF)

YAXUN PROFESSIONAL TOOLS

Made in China

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.