Introduction
Thank you for choosing the SMAEL 8040 Digital Sport Watch. This watch is designed for durability and functionality, featuring a dual analog-digital display, 50M water resistance, shock resistance, LED backlight, stopwatch, alarm, and weekly calendar. This manual provides essential information for setting up, operating, and maintaining your watch.
For a detailed diagrammatic guide, please refer to the official user manual PDF: SMAEL 8040 User Manual (PDF)
Specifications
Figure 1: Watch Parameters
| Feature | Detail |
|---|---|
| Brand | SMAEL |
| Model Number | 8040 |
| Display Type | Analog-Digital |
| Movement | Digital (Electronics) |
| Water Resistance Depth | 5Bar (50M) |
| Case Material | Acrylic |
| Dial Window Material Type | Acrylic |
| Band Material Type | PU (Rubber) |
| Clasp Type | Buckle |
| Dial Diameter | 26mm |
| Case Thickness | 22mm |
| Band Width | 18mm |
| Band Length | 23cm |
| Wearing Range | 140mm-230mm |
| Weight | 72g |
| Features | Stop Watch, Luminous, Back Light, Shock Resistant, LED Display, Alarm, Week Display |
| Certification | CE, RoHS |
Figure 2: Watch Dimensions and Wrist Measurement Guide
Package Contents
- 1 x Genuine SMAEL Watch
- 1 x User Manual
Controls and Display
The SMAEL 8040 watch features four control buttons and a clear analog-digital display.
Figure 3: Watch Face and Button Layout
- LIGHT (A) Button: Activates the EL backlight.
- MODE (B) Button: Cycles through different operational modes (Time, Chronograph, Alarm).
- RESET (C) Button: Used for resetting values or selecting items during setting, and for split timing in chronograph mode.
- START (D) Button: Used for starting/stopping functions and adjusting values during setting.
The display shows:
- Analog hands for Hour and Minute.
- Digital display for Hour, Minute, Second, Month, Date, Day of Week.
- Indicators for AM/PM, Alarm (ALM), and Hourly Chime (SIG).
Setup and Operation
Mode Switching
Press the MODE (B) button to cycle through the different operational modes: Normal Time Display → Chronograph Mode → Alarm Mode → Time Setting Mode.
Time and Date Setting
- From the normal time display, press the MODE (B) button three times. The seconds digits will start flashing, indicating you are in time setting mode.
- Press the START (D) button to reset the seconds to zero.
- Press the RESET (C) button to move the flashing selection to the hours.
- Press the START (D) button to adjust the hour. Note the AM/PM indicator for 12-hour format.
- Press the RESET (C) button to move the flashing selection to the minutes.
- Press the START (D) button to adjust the minutes.
- Continue pressing the RESET (C) button to cycle through and set the Month, Date, and Day of Week using the START (D) button to adjust each value.
- Once all settings are complete, press the MODE (B) button to exit the setting mode and return to the normal time display.
Alarm Setting
- From the normal time display, press the MODE (B) button twice to enter Alarm Mode.
- Press the RESET (C) button. The hour digits will start flashing.
- Press the START (D) button to adjust the alarm hour. Pay attention to the AM/PM indicator.
- Press the RESET (C) button again. The minute digits will start flashing.
- Press the START (D) button to adjust the alarm minutes.
- Press the MODE (B) button to exit the alarm setting mode.
Alarm and Hourly Chime ON/OFF
While in Alarm Mode (press MODE (B) twice from normal time display):
- Press the START (D) button to toggle the Alarm (ALM) and Hourly Chime (SIG) functions ON or OFF.
- When active, the corresponding ALM or SIG symbol will appear on the display.
Chronograph (Stopwatch) Function
- From the normal time display, press the MODE (B) button once to enter Chronograph Mode. The display will show '00:00:00'.
- Press the START (D) button to begin timing.
- To pause the timing, press the START (D) button again.
- To resume timing from the paused point, press the START (D) button.
- To reset the stopwatch to zero while it is stopped, press the RESET (C) button.
- Split Timing: While the stopwatch is running, press the RESET (C) button to display the split time. The stopwatch continues to run in the background. Press RESET (C) again to return to the running time display. To stop the stopwatch and view the final split time, press START (D), then RESET (C) to clear.
EL Backlight
Press the LIGHT (A) button at any time to illuminate the display for approximately 3 seconds, making it easy to read in low-light conditions.
Water Resistance Guidelines
Figure 4: 50M Water Resistance Indication
The SMAEL 8040 watch is rated for 50 meters (5 ATM) water resistance. This means it is suitable for:
- Daily use and splashes.
- Rain.
- Short periods of recreational swimming.
Important Precautions:
- DO NOT press any buttons while the watch is submerged in water.
- Avoid exposing the watch to hot water, steam, or extreme temperature changes, as this can compromise the water seals.
- Do not wear the watch during diving or high-pressure water activities.
Maintenance
- Cleaning: Wipe the watch case and strap regularly with a soft, dry cloth to remove dirt and moisture. For stubborn dirt, a slightly damp cloth can be used, followed by drying.
- Battery Replacement: When the display dims or the watch functions become erratic, it may be time to replace the battery. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly maintained.
- Storage: Store your watch in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields when not in use.
- Avoid Chemicals: Do not expose the watch to solvents, detergents, perfumes, or other chemical agents, as they can damage the case, strap, or seals.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Digital display is blank or dim. | Low battery. | Replace the battery. |
| Time is inaccurate. | Incorrect setting or battery issue. | Re-set the time and date. If problem persists, replace battery. |
| Buttons are unresponsive. | Watch is wet or internal malfunction. | Ensure watch is dry. If problem persists, seek professional service. |
| Condensation inside the watch. | Temperature change or compromised water seal. | Avoid extreme temperature changes. If condensation persists, have the watch inspected by a professional. |
User Tips
- To prolong battery life, avoid excessive and prolonged use of the EL backlight.
- Regularly check the watch for any signs of wear or damage, especially the strap and case, to ensure longevity.
- When traveling across time zones, utilize the dual time display feature for convenience.
Video Demonstration
Watch a short video demonstrating the various features and how the SMAEL 8040 watch looks on the wrist.
Video: SMAEL 8040 Product Showcase
Warranty and Support
For any issues not covered in this manual or for warranty inquiries, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase.