1. Introduction and Overview
Thank you for choosing the WiiYii P6 Smart Speedometer. This device is a multi-functional OBD2+GPS Head-Up Display (HUD) designed to enhance your driving experience by projecting essential vehicle information directly into your line of sight. Featuring a 5-inch TFT LCD widescreen, the P6 offers a clear and customizable display with dual system capabilities (OBD and GPS) for comprehensive data monitoring.
The P6 provides a wide range of functions including speed, RPM, water temperature, voltage, fuel consumption, driving time, and various alarms, ensuring you stay informed about your vehicle's status. This manual will guide you through the installation, operation, and maintenance of your new smart speedometer.
Image: WiiYii P6 Smart Gauge highlighting OBD+GPS dual system and various display options.
2. Package Contents
Please check the box for the following items:
- WiiYii P6 Smart Speedometer (Meter)
- OBD2 Cable
- HUD User Manual
- 3M Adhesive Tape
- Hexagon Wrench
- Crowbar (for cable routing)
Image: All accessories included in the WiiYii P6 package.
3. Specifications
| Product Name | Car gauge P6 smart speedometer multi-function auto electronics |
| Model Number | P6 |
| Type | Combiner HUD |
| Display Type | LCD Widescreen, TFT |
| Screen Size | 5 inches |
| Material | ABS+PC |
| Work Voltage | 9V ~ 16Vdc (12Vdc / 400mA) |
| Installation | OBD2 PLUG |
| Car Model Compatibility | Universal |
| Certificates | CE, ROHS, FCC |
| Dimensions (Approx.) | 109mm (Length) x 86mm (Height) |
| Warranty | 2 Years |
Image: Detailed dimensions and button identification for the WiiYii P6 device.
4. Installation and Setup
The WiiYii P6 offers two main installation methods: placing it on the dashboard or sticking it to the windshield. Ensure your vehicle is turned off before beginning installation.
Installation Steps:
- Locate OBD2 Port: Turn on your car (do not start the engine). Find your vehicle's OBD2 diagnostic port, usually located under the dashboard on the driver's side.
- Connect OBD2 Cable: Insert one end of the provided OBD2 cable into the vehicle's OBD2 port.
- Route Cable: Carefully route the OBD2 cable along the dashboard and into the A-pillar seal using the provided crowbar to tuck it neatly and avoid obstruction.
- Connect to HUD: Connect the other end of the OBD2 cable to the WiiYii P6 device.
- Position HUD: Place the HUD on your dashboard using the non-slip mat, or attach it to your windshield in a position that does not obstruct your view of the road.
- Test Device: Start your car's engine to verify that the HUD powers on and displays information.
Image: Step-by-step diagram for installing the WiiYii P6 HUD.
Image: Illustration of placing the HUD on the dashboard or sticking it to the windshield.
5. Operating Instructions
Device Controls:
The WiiYii P6 features three main buttons on the top for navigation and settings:
- OK Button: Confirm selections, enter settings.
- Left Button: Navigate left, decrease values.
- Right Button: Navigate right, increase values.
Display Interfaces:
The P6 offers 10 different display interfaces, allowing you to customize the information presented. You can switch between these interfaces with a single click using the control buttons.
Image: Examples of the 10 distinct display interfaces available on the WiiYii P6.
Image: Various multi-color interface options for personalized display.
Ambient Light:
The device includes an ambient light feature for enhanced driving comfort:
- Upon power-on, the ambient light will illuminate in blue, changing color with the environment.
- During an alarm event, the ambient light will turn red and flash, remaining at its brightest state.
- The ambient light can be manually turned off or adjusted via the settings. Even when turned off, it will still flash red in case of an alarm.
Image: Explanation of the ambient light's behavior during normal operation and alarms.
6. Functions and Display Modes
The WiiYii P6 operates on a dual system (OBD+GPS) to provide comprehensive vehicle data:
- OBD System: Can read over 100 kinds of data from your car's onboard diagnostics.
- GPS System: Provides satellite speed, clock, altitude, satellite number, compass, and driving time.
Image: Diagram illustrating the dual OBD and GPS systems and their respective data capabilities.
Key Functions Displayed:
- Speed (KM/H or MPH)
- Clock
- Engine RPM
- Water Temperature
- Voltage
- Fuel Consumption
- Driving Time
- Altitude
- Number of Satellites
- Compass / Driving Direction
- Acceleration Test (0-100km/h)
- Brake Test
- Turbo Pressure
- Driving Mileage
- PID (Whole vehicle data flow)
- Fault Clearing
Image: Visual representation of the various functions available on the WiiYii P6.
7. Alarms
The WiiYii P6 is equipped with several alarm functions to alert you to potential issues or unsafe driving conditions:
- Over-speed Alarm: Alerts you when your vehicle exceeds a preset speed limit.
- Fatigue Driving Alarm: Reminds you to take a break after a prolonged period of driving.
- Voltage Alarm: Warns you if your vehicle's battery voltage is too low or too high.
- Water Temperature Alarm: Notifies you if the engine coolant temperature reaches a critical level.
- RPM Alarm: Alerts you if the engine RPM exceeds a preset limit.
When an alarm is triggered, the ambient light will turn red and flash, and an audible alert may sound (depending on settings).
8. Maintenance
To ensure the longevity and optimal performance of your WiiYii P6 Smart Speedometer, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the device's screen and body. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the display or casing.
- Storage: If you need to store the device for an extended period, disconnect it from the vehicle and store it in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Impact: Protect the device from drops or strong impacts, which can damage internal components or the screen.
9. Troubleshooting
If you encounter issues with your WiiYii P6, please try the following:
- No Power/Display: Ensure the OBD2 cable is securely connected to both the vehicle's OBD2 port and the HUD device. Check your vehicle's OBD2 port for power (some vehicles require the ignition to be on).
- Incorrect Readings: Verify that the device is correctly configured for your vehicle type (if applicable in settings). For GPS data, ensure the device has a clear view of the sky for satellite acquisition.
- Fault Codes: The device has a function to clear fault codes. Refer to the on-screen menu for this option. If fault codes persist, consult a qualified mechanic.
- Device Freezes/Unresponsive: Disconnect the device from the OBD2 port, wait a few seconds, and then reconnect it to perform a soft reset.
If problems persist after trying these steps, please contact customer support.
10. User Tips
Based on the provided product information, no specific user tips from reviews or Q&A are available at this time. However, users generally find these devices most effective when positioned to minimize distraction while providing clear visibility of data.
11. Warranty and Support
The WiiYii P6 Smart Speedometer comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, warranty inquiries, or any questions regarding your product, please contact our support team:
- Contact Person: Layla (Manager)
- WhatsApp: +86 19926696768
- Email: QianruiLayla@gmail.com
A detailed user manual in PDF format is also available from the seller, which contains additional information and may be referenced for further details.