1. Introduction
Thank you for choosing the MEKEDE Wireless CarPlay Android Auto Decoding Box. This device enhances your driving experience by integrating advanced smartphone functionalities into your Mercedes Benz S Class W221 (NTG3.0/3.5) infotainment system. Enjoy seamless access to Wireless CarPlay, Wireless Android Auto, online navigation, multimedia playback, and more.
For a comprehensive guide and additional details, please refer to the official user manual PDF: MEKEDE Decoding Box User Manual (PDF).


2. Setup and Installation
This section provides general guidance for installing your MEKEDE Decoding Box. Professional installation is highly recommended due to the complexity of vehicle electronics.
2.1 Package Contents
Before installation, ensure all components are present:
- MEKEDE Decoding Box
- Power Harness
- USB Cable
- LVDS Cable
- WiFi Antenna
- GPS Antenna (if applicable)
- User Manual (PDF available online)

2.2 Installation Steps (General)
- Preparation: Turn off the vehicle and disconnect the car battery to prevent electrical damage.
- Access Head Unit: Carefully remove the trim panels and the original car head unit to access its rear connections.
- Connect Power Harness: Disconnect the original power harness from the head unit. Connect the provided MEKEDE power harness in-line with the original harness and the head unit.
- Connect LVDS Cable: Disconnect the original LVDS cable from the head unit. Connect the provided MEKEDE LVDS cable in-line, ensuring the correct input/output connections to the head unit and the decoding box.
- Connect USB Cable: Connect the USB cable from the decoding box to an accessible location for future updates or media playback.
- Connect Antennas: Attach the WiFi and GPS antennas to the corresponding ports on the decoding box. Position them for optimal signal reception.
- Test Functionality: Before reassembling, reconnect the car battery and test the decoding box's functionality (CarPlay, Android Auto, audio, video, original system switching).
- Reassemble: Once confirmed working, carefully reassemble the head unit and trim panels.



3. Operating Instructions
The MEKEDE Decoding Box allows you to seamlessly switch between your original car system and the new smart interface.
3.1 Switching Between Systems
To switch to the MEKEDE system, typically press and hold the 'C' (Clear) button or the 'Return' button on your car's console for 3 seconds. Repeat the action to return to the original car system.
3.2 Wireless CarPlay / Android Auto
- Ensure your iPhone (for CarPlay) or Android phone (for Android Auto) has Bluetooth and Wi-Fi enabled.
- On the MEKEDE system, navigate to the CarPlay/Android Auto icon.
- Follow the on-screen prompts to pair your phone via Bluetooth. Once paired, the system will automatically connect via Wi-Fi for full functionality.

3.3 Multimedia Playback (YouTube, Netflix, USB)
The system supports various multimedia options:
- Streaming Apps: Access pre-installed apps like YouTube and Netflix. Ensure the device is connected to a Wi-Fi hotspot (e.g., from your phone) for internet access.
- USB Media: Connect a USB drive to the provided USB port to play audio and video files.

3.4 Mirror Link
Mirror Link allows you to display your smartphone screen directly onto the car's display.
- Select the 'Mirror Link' option on the MEKEDE system.
- Follow the specific instructions for your smartphone (iOS or Android) to establish the connection. This usually involves connecting via Wi-Fi or USB.
3.5 Using Original Car Controls
The MEKEDE system is designed to integrate with your original car's controls, including the rotary knob, steering wheel buttons, and touchscreen (if applicable).

3.6 Product Demonstration Video
This video provides a visual guide to the product's features and operation within a vehicle.
4. Maintenance
To ensure the longevity and optimal performance of your MEKEDE Decoding Box, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the decoding box and the car's display. Avoid using harsh chemicals or abrasive materials.
- Software Updates: Periodically check for software updates from MEKEDE to ensure you have the latest features and bug fixes. Updates are typically performed via USB.
- Environmental Conditions: Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Cable Connections: Ensure all cables are securely connected. Loose connections can lead to intermittent functionality.
5. Troubleshooting
If you encounter issues with your MEKEDE Decoding Box, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/Black screen | Loose LVDS cable, incorrect power connection, system freeze. | Check all cable connections. Ensure the power harness is correctly installed. Try restarting the car. |
| No audio or distorted audio | Incorrect AUX input selection, loose audio cable, volume settings. | Ensure your car's audio source is set to AUX. Check audio cable connections. Adjust volume on both the car and the decoding box. |
| CarPlay/Android Auto not connecting | Bluetooth/Wi-Fi issues, phone compatibility, incorrect pairing. | Ensure phone's Bluetooth and Wi-Fi are on. Forget and re-pair the device. Update phone OS. |
| Original car system not accessible | Incorrect switching method. | Press and hold the 'C' or 'Return' button for 3 seconds to switch back. |
| Apps (YouTube/Netflix) not loading | No internet connection. | Ensure the decoding box is connected to a stable Wi-Fi hotspot with internet access. |
If the problem persists, consult the detailed PDF manual or contact MEKEDE customer support.
6. Specifications
| Feature | Description |
|---|---|
| Brand Name | MEKEDE |
| Model Numbers | LA10-BZ3.0, LA10-BZ3.5 |
| Compatibility | Mercedes Benz S Class W221 (NTG3.0, NTG 3.5) |
| Supported Functions | Wireless CarPlay, Wireless Android Auto, Online Map, Mirror Link, YouTube, Netflix |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 23 cm x 14 cm x 10 cm |
| Package Weight | 1.5 kg |


7. User Tips
- For optimal performance, ensure your smartphone's operating system is up-to-date.
- If experiencing connectivity issues, try restarting both your phone and the car's infotainment system.
- Consider using a dedicated Wi-Fi hotspot for the decoding box if you frequently stream video content to ensure a stable connection.
- Always ensure the car is in a safe, parked position before attempting to operate complex features or make system adjustments.
8. Warranty and Support
MEKEDE products are designed for reliability and performance. For detailed warranty information, please refer to the official product documentation or contact your retailer.
For technical support, troubleshooting assistance, or any questions regarding your MEKEDE Decoding Box, please contact the MEKEDE StrongNavi EU Store directly through their official channels. Always provide your product model number (LA10-BZ3.0 or LA10-BZ3.5) and a clear description of the issue for faster service.