1. Product Description
The MOES Water Timer (Model NN1101A) is a non-smart electronic water valve with an integrated display, designed for easy and reliable irrigation control. It supports manual rain delay, manual start, and programmable watering schedules to adapt to various usage needs. The IP55-rated housing ensures suitability for outdoor installation, and its dual brass inlet and outlet connectors provide durable and stable water flow.

2. Safety Information
Warning: Do not disassemble, reassemble, modify, or attempt to repair this product by yourself. Any such work should be performed by authorized professionals to ensure safety and proper function.
3. Specifications
| Feature | Description |
|---|---|
| Model | NN1101A |
| Water Duration | OFF (00H00M), 00H01M–23H59M |
| Watering Frequency | 1 hour to 23 hours / 1 day to 7 days |
| Working Pressure | 0.5-8 bar (7.25 psi – 116 psi) |
| Thread | For taps with 3/4" (NH3/4" External Thread for US version) |
| Working Temperature | 4.5 ℃-45 ℃ (40.1°F−113 °F) |
| Battery Power | 2x AA Alkaline batteries (not included) |
| IP Rating | IP55 |


4. Product Overview
The MOES Water Timer features an intuitive design with a large LCD screen, a rotary knob for mode selection, and four control buttons for settings adjustment.

4.1. Screen Content
- Battery Level: Indicates current battery level. Flashes when low.
- Rain Delay: Indicates watering delays during rainy days.
- Child Lock: Shows if the child lock function is ON/OFF.
- Every: Indicates watering interval.
- Next: Displays the next watering time.
- Manual: Indicates if manual watering mode is ON.
4.2. Knob Content
- NOW: Set current time.
- START TIME: Set the time for watering to begin.
- HOW LONG: Set watering duration (1 minute to 23 hours 59 minutes).
- HOW OFTEN: Set watering frequency (1 hour to 23 hours / 1 day to 7 days).
- AUTO: Automatically run watering schedules.
- OFF: Turn off the watering timer.
4.3. Buttons
- Knob: Turn to customize your watering schedule.
- OK Button: Confirm settings or proceed to the next step.
- + Button: Adjust time and system settings, or delay the watering program.
- - Button: Adjust time and system settings, or enable child lock.
- Faucet Icon Button: Press in Auto mode to set up manual watering.
5. Setup
5.1. Installing the Batteries
- Remove the cover on the back of the timer by pulling it out.
- Install 2 new AA (1.5V) alkaline batteries (not included). Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
- Firmly reinstall the cover onto the timer.
Note: Please pay attention to the positive and negative poles of the battery and place them correctly.

- Please secure the battery cover to ensure the waterproofness of the battery compartment.
- Remove batteries if the timer is not used for a long time or before winter to prevent damage.
- Replace batteries promptly when the low battery indicator appears, as the valve will automatically close to prevent leakage.
- Do not install rechargeable batteries to avoid low voltage issues.
- The timer has a power failure memory function. After a power outage and battery reinstallation, you only need to set the current time; watering schedules are retained.
6. Operating Instructions
The MOES Water Timer offers flexible programming options for various watering needs.

6.1. Setting Current Time (NOW)
- Turn the Knob to “NOW”. The hour digits will flash.
- Press the + or - button to adjust the hour. Press OK to confirm and move to the minute digits.
- The minute digits will flash. Press the + or - button to adjust the minutes (0–59 in cycle). Changing minutes does not affect the hour setting.
- Press OK to confirm, returning to the hour setting. Alternatively, rotate the Knob to save the settings.
Tip: Hold the + or - button to change the time quickly. If you press OK at the end of setting, it will go back to the previous step.
6.2. Setting Start Time (START TIME)
- Turn the Knob to “START TIME”.
- “Start Time” is displayed with a default value of 6:30, and the hour digits will flash.
- Press the + or - button to set the hour. Press OK to confirm and move to set the minutes.
- Press the + or - button to set the minutes. Press OK to confirm.
- The OK button confirms and switches between hours/minutes.
- Rotate the Knob to save the settings.
6.3. Setting Watering Duration (HOW LONG)
- Turn the Knob to “HOW LONG”.
- Press the + or - button to set the hour. Press OK to confirm and move to set the minutes.
- Press the + or - button to set the minutes. Press OK to confirm.
- Rotate the Knob to save the settings.
Tips: The duration can be set from 00H01M to 23H59M. Setting the time to 00H00M indicates that the watering plan is turned off.
6.4. Setting Watering Frequency (HOW OFTEN)
- Turn the Knob to “HOW OFTEN”.
- Adjust using the + or - buttons. The available range is 1H-23H or 1 DAY-7 DAYS.
- Rotate the Knob to save the settings.
Tip: The value of “HOW LONG” must be less than “HOW OFTEN” (in integer units). When “HOW OFTEN” is set to 1H, the maximum “HOW LONG” is 00H59M.
6.5. AUTO MODE
- Turn the knob to “AUTO”. The watering plan will be automatically executed, and the screen will turn off after 1 minute.
- The screen will display the current time and the next scheduled valve opening time, alternating every 3 seconds.
Note: Automatic valve schedules will only be executed when the knob is set to the AUTO position.
6.6. OFF MODE
- To stop the watering plan for an extended period, turn the knob to “OFF” (your settings are saved).
- The timer will not water automatically while in OFF mode (the screen will display “OFF” in large letters).
- To start watering automatically again, turn the knob back to “AUTO” to resume your programmed watering schedule.
6.7. Rain Delay Watering
Rain Delay mode allows you to skip the watering schedule for a set period, helping to save water during rainy days.

- When the Knob is at the “AUTO” position, press the + button for 3-5 seconds to enter the rain delay mode.
- The screen will display 1 day by default. Press the + or - button to select 1 to 15 days for rain delay.
- Press OK to confirm.
- To quit rain delay mode, hold the + button again for 3-5 seconds to resume your programmed watering schedule.
- Manual watering is available when in rain delay watering.
- If the OK button is not pressed, the setting will exit automatically after 5 seconds without saving any changes.
- If the rain delay is canceled before the “START TIME”, the water timer will continue running the scheduled task. Otherwise, it will skip to the next scheduled task.
6.8. Manual Watering
This feature allows you to water without interrupting your scheduled watering program.
- Keep the knob at the “AUTO” position, then click the OK button to enter manual watering mode.
- The default duration of manual watering is 0 minute. Press the + or - button to set the manual watering time (up to 7H59M).
- Press OK to start watering, otherwise it will quit after 10 seconds.
Tip: Manual watering takes priority over scheduled watering; the scheduled task will be skipped if there is a conflict.
6.9. Child Lock Function
The child lock function prevents accidental changes to your watering schedule.

- Keep the knob at the “AUTO” position. Press and hold the - button for 3 seconds until a lock icon appears on the screen.
- To cancel the child lock setting, press and hold the - button again for 3 seconds.
7. Maintenance
- Regularly check the filter for blockages and clean or replace it as needed to maintain optimal water pressure.
- Ensure the battery compartment is sealed properly to maintain IP55 waterproof performance.
- Remove batteries if the timer will not be used for an extended period or during winter months to prevent corrosion and damage.

8. Troubleshooting
| Problem | Possible Cause | Possible Solution |
|---|---|---|
| Leakage |
|
|
| Water won't stop / flow out |
|
|
| Short battery life |
| Use new alkaline batteries. |
| Low water pressure |
|
|
| No response from manual/rain delay function | OK button not pressed after setting. | Press OK button again after time confirmed for saving and running. |
If you encounter problems installing or operating your device, please review its product data sheet for further assistance: https://www.moestech.com/blogs/news/twv-cr01-us-cu
9. User Tips
- Optimize Battery Life: Always use fresh alkaline batteries and avoid mixing old and new ones. Remove batteries during long periods of inactivity.
- Prevent Leaks: Ensure the silicone gasket is properly seated and the timer is securely attached to a standard 3/4" faucet. Use Teflon tape if necessary for a tighter seal.
- Regular Filter Checks: Periodically inspect and clean the internal filter to prevent blockages and maintain consistent water flow.
- Child Lock for Peace of Mind: Utilize the child lock feature to prevent accidental changes to your watering schedule, especially in households with children.
- Leverage Rain Delay: Use the rain delay function to conserve water and avoid overwatering during periods of natural rainfall.
10. Warranty & Support
10.1. Declaration of Conformity
WENZHOU NOVA NEW ENERGY CO.,LTD declares that the electronic equipment type NN1101A is in compliance with Directives 2014/30/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at: https://www.moestech.com/blogs/news/twv-cr01-us-cu
10.2. Recycling Information
All products marked with the WEEE symbol must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment. Correct disposal and recycling help prevent potential negative consequences for the environment and human health. Contact your local authority for information on collection points.
10.3. Warranty Instructions
Your MOES Water Timer is covered by a 24-month warranty from the date of purchase. To exercise warranty rights, you must present a warranty card and proof of purchase (e.g., VAT invoice, financial receipt). The warranty does not cover mechanical damage due to user fault, improper use, or defects from non-original parts. For full warranty terms and conditions, please refer to the official product documentation.
A PDF version of this user manual is available for download: User manual (PDF)
10.4. Manufacturer & Support Contact
Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com
EC Representative (AMZLAB GmbH):
Address: Laubenhof 23, ESSEN 45326
Email: info@amz-lab.de
Tel: +491745298066
UK Representative (EVATOST CONSULTING LTD):
Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292–1680945
Email: contact@evatost.com