Disclaimer
For your safety, it is advisable to not watch video or operate the machine when you are driving. While driving, please adjust the volume to the optimum level. Before operating the machine, please read carefully and understand the safety instructions and warning signals stated in the manual. Keep the manual for future reference.
- Firstly, please ensure safety on the road.
- In difficulty operating the machine, please stop the car safely before you operate the machine.
- Keep the machine out of reach from children to prevent unnecessary injury or damage to the machine.
- While using the GPS navigation, please adhere to the traffic rules.
- Please do not operate the machine at restricted areas such as petrol station, wine refinery, strong electromagnetic obstruction area to prevent danger.
- Please do not install, maintain or repair the machine on your own with the power on. It is very dangerous to install and repair the machine by personnel without proper professional installation training and experience on electronic device and automobile parts.
- Please do not install or store the machine, especially LED display screen directly under the sunlight or hazardous substances. During installation, please ensure no direct contact with the air-conditioner's ventilation duct. This will cause damage to the machine, the car or injury to the human body.
- Please do not use sharp object to scratch or press the display screen vigorously as this may damage the screen.
- Please do not expose the machine under humid weather or direct contact with liquid to prevent fire or lighting.
1. Setup and Installation
This section provides instructions for installing your Mekede MN-X head unit. Professional installation is recommended.
1.1 Package Contents
Before beginning installation, verify that all components are present:

Image: Mekede MN-X Series Package Contents including the main unit, packaging box, power cable, GPS antenna, AUX cable, 4G antenna, microphone, and USB cable.
- Machine (Head Unit)
- Packaging Box
- Power Cable
- GPS Antenna
- AUX Cable
- 4G Antenna
- MIC (Microphone)
- USB Cable
1.2 Compatibility Check
The Mekede MN-X head unit is designed for BMW 1 Series E81, E82, E87, E88 models from 2005-2012. Please ensure your car's original system is compatible. If your car does not have a small screen originally, an iDrive controller will be included for models with 'A' designation.

Image: Visual guide for identifying your original car system (no screen, CCC, CIC) to ensure compatibility.

Image: Installation examples for different BMW 1 Series systems (Original no screen, CCC, CIC) and their respective LVDS connections.
1.3 GPS Antenna Installation
The GPS antenna is crucial for navigation functionality. Follow these steps for proper installation:
- Before affixing the GPS antenna, clean the designated surface thoroughly.
- Tear off the tape backing and firmly press the GPS antenna onto the cleaned surface.
- Remove the side cover of your car's interior.
- Route the GPS cable through the storage box until it reaches the control panel of the head unit. Secure the cable with a cable tie.
- Connect the GPS antenna's plug to the head unit.
Important Notes:
- Ensure the system power is off when connecting the GPS antenna.
- Do not shorten or extend the GPS cable, as this may cause short circuits or damage.
- Install the antenna on a leveled surface with minimal radio wave obstruction. Tempered glass or tint may weaken the signal; consider installing outside the vehicle if necessary.
- Do not interfere with the steering wheel or gear lever with the GPS antenna, as this can be dangerous.

Image: Recommended placement for the GPS antenna on the dashboard, showing cable routing.
1.4 Camera Wiring Diagram (Optional)
If you are installing an aftermarket camera, refer to the following wiring diagram. If using an original camera, ensure the camera type is set to “Original back car” in the settings.

Image: Detailed wiring diagram for connecting an aftermarket camera, including reverse detection and ground connections.
1.5 Addressing No Sound Issues (AUX Connection)
This unit outputs sound through AUX. Please confirm your car has an AUX function before ordering. If not, an FM transmitter is required, though sound quality may be reduced.
- Connect the original car fiber optic cable to the interface of the conversion line, then connect to the host.
- Connect "AUX" and switch the mode to "AUX" on your car's original radio system.

Image: Step-by-step guide for resolving no sound by connecting fiber optic and AUX cables.

Image: Car radio display showing "AUX" selected, highlighting the requirement for an AUX input.
2. Operating Instructions
2.1 Basic Operation
- Power On / Off: When ACC is connected, press the power button on the front panel to switch on the machine. To switch off, turn off the engine and unplug the car key.
- Volume Adjustment: Press the VOL+ / VOL- buttons on the front panel to adjust volume.
- Mute Control: Press the left volume button to display the volume bar. Press the media volume to MUTE.
- Backlight Control: Adjust backlight settings under "Display Setting" in "Car Settings".
2.2 User Interface and Navigation
The head unit features a user-friendly interface with various applications. Slide left or right to switch between different home pages.

Image: Main screen of the head unit showing various application icons.
Video: Demonstration of the Mekede MN-X head unit's user interface, including UI styles, music, settings, Wi-Fi, YouTube, Bluetooth, split-screen, audio equalizer, and CarPlay/Android Auto.
2.3 Dual System Free Switching
The head unit is compatible with your original car system and the Android 14 system, allowing you to switch between them at will.

Image: Illustration of seamless switching between the original car system and the Android 14 system.
2.4 Original Car Functions Integration
The head unit retains and properly integrates with several original car functions:
- Original radio system
- Original CD function
- Steering wheel control
- Original reversing image
- i-Drive control

Image: Examples of original car functions that remain operational with the new head unit.
2.5 Network & Internet
The unit supports Wi-Fi and optional 4G LTE connectivity.
- Wi-Fi Connection: Go to Settings > Network & Internet > Wi-Fi. Ensure Wi-Fi is switched on. Select your desired hotspot, enter the password, and touch Connect.
- 4G LTE: The built-in 4G modules allow connection to fast cellular data networks. An optional 4G SIM card can be inserted.

Image: Location of the 4G SIM card slot and 4G antenna connection.
2.6 Wireless CarPlay & Android Auto
The head unit features built-in Wireless CarPlay (for iOS) and Wired/Wireless Android Auto (for Android) for seamless smartphone integration.
- Wireless CarPlay (iOS):
- Connect via Bluetooth (BT).
- Click on "Phone Link" and wait for connection. (CarPlay can also be connected via USB Cable).
- Wireless+Wired Android Auto (Android):
- Connect the mobile phone and car DVD player with a USB cable.
- Click on "Phone Link" and wait for connection.

Image: Connection steps for Wireless CarPlay and Android Auto.
2.7 Bluetooth Functionality
Bluetooth's hands-free function enables safe calling while driving.
- Pairing:
- Activate Bluetooth hands-free function on the head unit.
- Turn on Bluetooth and device search on your mobile phone.
- Search for the head unit's name (e.g., BT-E8D9).
- Enter PIN (0000) on your phone to connect.
- "CONNECTED" will appear on screen upon successful connection.
- Making Calls: Dial directly on the screen or use the dial pad. Use the 'X' icon to delete incorrect numbers. Press the green call icon to call, or the red hang-up icon to end a call.
- Syncing Contacts: Touch the "Synchronize" icon to download contacts from your phone.
- Call History: View outgoing, incoming, and missed calls.
- Bluetooth Music: Play music from your phone through the car speakers. Supports "Previous", "Next", "Pause", and "Play" controls.

Image: Bluetooth interface for pairing and managing devices.
2.8 Media Playback (Music & Video)
- Music: Supports MP3 cover display. Use "Order", "Sound", "Curr Soon", "Pre", "Playing", "Next" controls.
- Video: Supports video from USB drive, internal storage. Use "Picture in", "Order", "Audio Setting", "Current Video", "Pre", "Playing", "Next" controls.
- Playback Mode and Position Memory: The system resumes to the last mode and position (radio channel, music/video track) prior to shutdown.
2.9 Display Settings
- Brightness: Adjust display brightness for day and night.
- Volume Options: Adjust volume for different system functions (e.g., Entertainment, Navigation, Low/Mid/High Pitch).
- Sound Effect: Access equalizer settings (Standard, Rock, Pop, Classic, Jazz, Custom) and speaker balance (Front Left/Right, Rear Mode, Centre Position, Surround).
- Video in Motion: Enable/disable video playback while the car is in motion. (Recommended to disable for safety).
2.10 Navigation
The GPS navigation system helps you reach your destination faster and more efficiently. Ensure APK Navigation Application is installed and maps are correctly loaded.
- Navigation Map Data: Copy map data to internal SD card or external USB. Delete unnecessary data if storage is insufficient.
- Navigation Activation: After installing a navigation app, its icon will appear on the homepage. Touch to launch.
- Reversal Warning Line: If your car camera supports it, enable this option to see distance during reverse.
- Split Screen: Supports displaying two applications simultaneously.

Image: GPS navigation features with supported map applications and split-screen mode.
2.11 Other Features
- ADAS DVR: Anti-collision warning driving recorder (DVR not included).
- TPMS Support: Monitors tire pressure and temperature (sensors not included).
- OBD II Support: On-board diagnostics to monitor car status (OBDII not included).

Image: ADAS DVR features for enhanced driving safety.

Image: TPMS (Tire Pressure Monitoring System) functionality.

Image: OBD II diagnostic features.
3. Maintenance
3.1 Maintaining the LCD Screen
- Turn off the power before cleaning the LCD screen.
- Wipe the screen with a soft fabric to prevent scratches.
- Do not use wet towels, benzene, or chemical cleaners to clean the LCD screen.
- Avoid exposing the display screen directly to sunlight or heat for prolonged periods.
- Do not press the LCD screen vigorously. Touch gently to prevent scratches or dust.
- Small black or bright dots may appear on the LCD screen; this is a specification, not a defect.
- In cold areas, the LCD screen may be dimmer after power on, but brightness will adjust to normal after a short while.
3.2 Restore Factory Setting
To restore the unit to factory settings, go to Settings > System Info > Factory Setting. Confirm the action in the pop-up dialog. All your personalized settings will be removed.
4. Troubleshooting Guide
If you encounter problems, refer to this guide. If issues persist, contact professional support.
| Issue | Cause | Action (Reference) |
|---|---|---|
| Unable to power on | Car key not inserted or ACC not turned on | Insert car key and turn on ACC |
| Power cord not connected | Connect power cord correctly | |
| Fuse is damaged | Replace similar fuse | |
| Inresponsive touch screen | System multitasking (e.g., navigation) | Wait a moment. If persists, contact customer service. |
| No rear view image | Reverse camera not installed | Install reverse camera and plug into CCD socket |
| Reverse camera type does not match | Replace reverse camera | |
| Rear view appears during reverse position even when system is not booted. Power button is null. | Safety feature: rear view preset for safety priority | Power on to boot system after resuming from reverse position to normal. |
| No GPS signal | GPS antenna not connected | Connect GPS antenna correctly |
| Car may be at a GPS signal blind spot | Drive for a distance to check GPS signal | |
| Positioning and navigation failed upon power on | Blind spot of navigation map; remote areas/routes not covered | Contact customer service to update map |
| Unable to locate destination routes | Incorrect spelling of destination | Ensure correct spelling; try possible names |
| Destination not updated in database | Contact customer service to update map | |
| Navigation routes are far | Navigation system applies built-in rules to map data (road grade, traffic rules, etc.) | This is normal behavior based on routing algorithms. |
| Blank on the map | Scale setting issue | Try zooming in/out to adjust map display. |
| Loss of GPS signal | Reset destination or select new landmark. |
4.1 Original Menu Resolution Issues
If the OEM menu displays symptoms like flashing or incorrect resolution, check the LVDS connector and set the original menu resolution.

Image: Visual guide for troubleshooting and setting the original menu resolution.
Steps to Set Resolution:
- Go to "Setting".
- Select "Personalized Setting".
- Choose "Resolution ratio".
The display screen of the original car should correspond to the selected option; otherwise, the display quality may be poor.
5. Specifications
The Mekede MN-X Head Unit offers advanced features and robust performance.
5.1 General Specifications
- Operating System: Android 14
- Display Size: 10.25'' (1920*720 Resolution)
- RAM: 6GB (various configurations available up to 12GB)
- ROM: 128GB (various configurations available up to 512GB)
- CPU: Octa-Core (e.g., MTK8781 2.5GHz)
- Out Power: 4*45W
- Voltage: 12 V
- Item Weight: 2kg
- Interface: Plug and Play
- TF/Micro SD Slot: 1
- Max External Memory: 128G (or 512G depending on configuration)
- Certification: CE
5.2 Special Features
- Wi-Fi Function
- Support Steering Wheel Control
- Support 3G/4G Network
- Support Can-Bus
- Built-in GPS
- Mobile Phone Link (CarPlay, Android Auto)
- MP3 Players
- Reversing Input
- Split Screen
- Built-in Screen: Yes
- Touch Screen: Yes
- Built-in DVD Player: No
- Built-in CD Player: No

Image: Detailed parameters table for various MN-X configurations.

Image: Overview of the 8-Core CPU and memory configuration.
6. User Tips
- For optimal sound, ensure your car has a working AUX input and select AUX mode on your original radio.
- Regularly check for system updates to ensure the best performance and latest features.
- When installing navigation apps, ensure sufficient storage is available on the internal SD card or external USB.
- Utilize the split-screen feature for multitasking, such as navigation while playing music.
- Always prioritize safety; avoid operating complex functions while driving.
7. Warranty and Support
For any persistent issues not covered in the troubleshooting guide, or for warranty claims, please contact the seller or a professional service center. Do not attempt to dismantle or repair the unit yourself, as this may void the warranty.
The manufacturer, Shenzhen Mekede Technology Co., Ltd., owns both the MEKEDE and NaviFly brands. Products from either brand are from the same manufacturer.

Image: Brand ownership information for MEKEDE and NaviFly.
This product has received certifications from ISO9001, ROHS, CCC, CE, FC, BSCI, and others, ensuring quality and compliance.

Image: Product certifications.