Zoomlion 4LZT-5.0QC

Contents

Zoomlion 4LZT-5.0QC Rice Combine Harvester Instruction Manual

Model: 4LZT-5.0QC | Brand: Zoomlion

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Zoomlion 4LZT-5.0QC Rice Combine Harvester. Please read this manual thoroughly before operating the machine to ensure proper usage and to maximize its lifespan and performance. The 4LZT-5.0QC is a high-accuracy agricultural machine designed for harvesting rice and corn, featuring robust construction and efficient operation.

Zoomlion 4LZT-5.0QC Rice Combine Harvester operating in a field
Figure 1: Zoomlion 4LZT-5.0QC Rice Combine Harvester in operation.

2. Specifications

The following table details the key technical specifications of the Zoomlion 4LZT-5.0QC Rice Combine Harvester:

FeatureUnitValue
Model-4LZT-5.0QC
Dimension (L×W×H)mm4595×2020×2220
Rated PowerkW70/72/74 (equivalent to 75-85 HP tractor power)
Gearbox Type-37EmissionsHST+75Gearbox (Gear Drive)
Mass of Complete Machinekg2750
Header Widthmm2000/2200
Feed Quantitykg/s5
Minimum Ground Clearancemm300
Threshing Cylinder Dimension (Outer diameter×length)mmΦ538×1290, Φ538×662
Track Specification (pitch×pitch nos.×width)mm/pitch90mm×52pitch×400mm
Track Distancemm1150
Grain Receiving Type-Manual or mechanical spiral unloading
Application-Rice, Corn
Number of Rows-6
Row Distancemm90-400
Key Selling Points-High-Accuracy
Core Components-Engine

3. Setup and Pre-Operation Checks

Before operating the combine harvester, ensure all components are correctly assembled and all pre-operation checks are performed. Due to the complexity and size of this machinery, professional assistance for initial setup is highly recommended.

  1. Assembly: Ensure all major components, such as the header, threshing unit, and grain tank, are securely attached according to the manufacturer's assembly guidelines (refer to separate assembly manual if provided).
  2. Fluid Levels: Check engine oil, coolant, hydraulic fluid, and fuel levels. Replenish as necessary.
  3. Track Inspection: Inspect tracks for damage, proper tension, and debris.
  4. Belt and Chain Tension: Verify that all belts and chains are correctly tensioned and free from wear or damage.
  5. Cutting Mechanism: Ensure the cutting blades are sharp and properly aligned. Clear any obstructions from the header.
  6. Safety Features: Confirm all safety guards, shields, and emergency stop buttons are in place and functional.
  7. Operator Controls: Familiarize yourself with all controls in the cabin. Ensure they operate smoothly and respond correctly.

4. Operating Instructions

Operating the Zoomlion 4LZT-5.0QC requires careful attention to safety and proper technique to achieve optimal harvesting results. Always wear appropriate personal protective equipment (PPE).

  1. Starting the Engine: Follow the manufacturer's specific starting procedure for the engine. Allow the engine to warm up before engaging any harvesting functions.
  2. Engaging Harvesting Functions: Gradually engage the header, reel, and threshing mechanisms. Monitor for unusual noises or vibrations.
  3. Adjusting for Crop Conditions:
    • Reel Speed and Height: Adjust the reel speed to match ground speed and crop conditions to ensure smooth feeding into the header. Adjust reel height to gently lift lodged crops.
    • Header Height: Set the header height to cut the crop at the desired stubble height, minimizing ground contact.
    • Threshing Clearance and Speed: Adjust the concave clearance and cylinder speed based on crop type (rice or corn) and moisture content to ensure complete threshing with minimal grain damage.
    • Fan Speed and Sieve Settings: Optimize fan speed and sieve openings to separate grain from chaff and straw effectively, reducing grain loss and improving sample quality.
  4. Driving and Steering: Maintain a steady ground speed appropriate for crop density and terrain. Use the steering controls to guide the harvester along the crop rows.
  5. Monitoring Performance: Continuously monitor the grain loss indicators, engine temperature, and other dashboard gauges. Adjust settings as needed.
  6. Grain Unloading: When the grain tank is full, unload the grain into a transport vehicle using the manual or mechanical spiral unloading system.
  7. Shutting Down: Disengage all harvesting functions, lower the header, and allow the engine to cool down before shutting it off.

5. Maintenance

Regular maintenance is crucial for the longevity and reliable performance of your combine harvester. Adhere to the maintenance schedule outlined below.

5.1 Daily Maintenance

  • Clean the machine thoroughly, removing crop residue, dust, and debris.
  • Check all fluid levels (engine oil, coolant, hydraulic fluid).
  • Inspect cutting elements for sharpness and damage.
  • Lubricate all grease points as indicated in the lubrication chart (refer to separate service manual).
  • Check track tension and condition.
  • Inspect belts and chains for wear and proper tension.
  • Verify the functionality of all lights and safety devices.

5.2 Weekly/50-Hour Maintenance

  • Change engine oil and filter (if operating in dusty conditions, consider more frequent changes).
  • Inspect air filters and clean or replace if necessary.
  • Check battery terminals and electrolyte level.
  • Inspect all hydraulic hoses and connections for leaks or damage.
  • Tighten any loose bolts or fasteners.

5.3 Seasonal/Annual Maintenance

  • Perform a comprehensive inspection of all major components.
  • Replace fuel filters.
  • Drain and flush the cooling system.
  • Inspect and adjust valve clearances (if applicable).
  • Check and adjust wheel bearings.
  • Store the machine in a dry, protected area when not in use.

6. Troubleshooting

This section provides general guidance for common operational issues. For complex problems, contact qualified technical support.

ProblemPossible CauseSolution
Engine fails to startLow fuel, dead battery, clogged fuel filterCheck fuel level, charge/replace battery, replace fuel filter
Excessive grain lossIncorrect fan speed, improper sieve settings, worn threshing componentsAdjust fan speed and sieve settings, inspect and replace worn parts
Poor threshing quality (unthreshed grain)Incorrect cylinder speed, wide concave clearance, high crop moistureAdjust cylinder speed, reduce concave clearance, wait for drier conditions
Overheating engineLow coolant, clogged radiator, faulty thermostatCheck coolant level, clean radiator, replace thermostat
Unusual noises or vibrationsLoose components, worn bearings, foreign objectsInspect and tighten, replace worn parts, clear obstructions immediately

7. User Tips

  • Always perform a walk-around inspection before each use to identify any potential issues.
  • Keep the machine clean, especially around moving parts and cooling systems, to prevent overheating and wear.
  • Regularly check and adjust settings for optimal performance based on varying crop conditions (e.g., moisture, density).
  • When harvesting in wet or muddy conditions, ensure tracks are properly maintained and cleaned to prevent slippage and damage.
  • For any complex issues or adjustments, do not hesitate to contact professional technical support.

8. Warranty and Support

The Zoomlion 4LZT-5.0QC Rice Combine Harvester comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects and material faults under normal operating conditions. This warranty does not cover wear and tear parts, misuse, or damage caused by improper maintenance.

8.1 Technical Support

For any technical inquiries, operational assistance, or troubleshooting beyond the scope of this manual, please contact our dedicated technical support team. We offer 24-hour technical support and can arrange for engineers to guide installation and operation if required.

Contact Information:

  • Email: fangw5817@gmail.com
  • WhatsApp: +86 13975816668
  • Service Hours: 24/7 Technical Support

Please have your model number (4LZT-5.0QC) and purchase details ready when contacting support.

© 2026 Zoomlion. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.