Introduction
Thank you for choosing the MAXRUNON D9 Motorcycle Bluetooth Intercom Helmet Headset. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure you get the best experience from your device. The D9 is designed for seamless communication and entertainment while riding, featuring advanced Bluetooth 5.3, Hi-Fi audio, noise cancellation, and a 2-rider intercom system.
Package Contents
Please check the package to ensure all items are present:
- D9 Main Unit
- Speaker Unit (40mm High-Fidelity Speakers)
- Button Mic (Wired Microphone for full-face helmets)
- Hybrid Boom Mic (for open-face helmets)
- Adhesive Mount
- Back Clip
- Speaker Pads
- Hook-and-Loop Fastener for Speaker (Velcro for Speaker)
- Type-C Cable
- Sponge for Boom Mic
- Velcro for Boom Mic
- Windproof Cover for Boom Mic
- Thickness Adjustment Pads
- User Manual (this document)
Product Overview: Controls and Ports
Familiarize yourself with the main unit's controls and connection points:
- Volume - Button
- Volume + Button
- Function Button (X button): Multi-purpose control.
- Intercom Button
- Audio Exchange Port
- Type-C Charging Port
Installation
Follow these steps to install your D9 headset on your helmet:
- Mount the Main Unit:
- Using the Back Clip: Push the clamp into place on the helmet edge. Slide the D9 main unit onto the back clip until it locks securely.
- Using the Adhesive Mount: Clean the helmet surface. Peel off the protective film from the adhesive mount and firmly attach it to the desired location on your helmet. Slide the D9 main unit onto the adhesive mount.
- Install Speakers:
- Attach the hook-and-loop fasteners (Velcro) to the inside of your helmet where your ears are positioned.
- Attach the speaker pads to the speakers if needed for comfort or depth adjustment.
- Place the speakers onto the Velcro inside the helmet. Ensure the short wire speaker is installed on the left side of the helmet and the long wire speaker on the right side.
- Install Microphone:
- For Open-Face Helmets: Use the Boom Microphone. Attach it to the inside of the helmet near your mouth using its adhesive backing.
- For Full-Face Helmets: Use the Wired Microphone (Button Mic). Attach it to the inside of the helmet near your mouth using its adhesive backing.
- Connect Audio Cable: Ensure the audio cable from the speakers and microphone is securely connected to the D9 main unit's audio exchange port. Align the two triangle markers and insert the cable fully.
Basic Operation
| Function | Button Operation |
|---|---|
| Power On/Off | Press and hold Function Button + Volume + for 2 seconds |
| Play Music | Single tap Function Button |
| Pause Music | Single tap Function Button |
| Previous Track | Press and hold Volume + for 3 seconds |
| Next Track | Press and hold Volume - for 3 seconds |
| Volume Up | Single tap Volume + |
| Volume Down | Single tap Volume - |
| Answer Call | Any button |
| End Call | Single tap Function Button |
| Reject Call | Press and hold Function Button for 3 seconds |
| Connect Smartphone | Press and hold Intercom Button for 3 seconds |
| Group Bluetooth Connection | Press and hold Intercom Button for 2 seconds (until two units are found), then single tap Intercom Button to confirm. |
| Team Mode | Single tap Intercom Button |
| Universal Mode | Double tap Intercom Button. Other Bluetooth intercoms must be in pairing mode. |
| Disconnect Group Bluetooth | Press and hold Intercom Button for 2 seconds (while in group Bluetooth connection). |
Advanced Features
FM Radio
- Turn On/Off FM Radio: Double tap Function Button.
- Search FM Stations: Single tap Function Button (when FM is on).
- Wide FM Range: 87.5-108 MHz.
Voice Assistant Support
- Works with your phone's voice assistant (e.g., Siri, Call Max).
- Activate: Double-tap the Function Button.
2-Rider Intercom System
- Stay connected with smooth intercom communication.
- Max Intercom Range: 500-1000 meters in open areas.
- Universal Pairing: Connects with other Bluetooth headsets.
- Automatic Reconnection: For continuous communication.
Intelligent Intercom Priority
- Automatic volume adjustment for clear communication.
- When intercom is active, music volume dips, allowing voice to cut through seamlessly.
Seamless Audio Multitasking
- Stay connected and entertained simultaneously.
- Combine Intercom, GPS navigation, Music, and FM Radio.
Advanced Noise Cancellation (CVC/DSP)
- Delivers clear calls even at speeds up to 100 km/h.
- Reduces wind noise and engine noise.
- Protects hearing and improves focus.
Hi-Fi Sound & 40mm Speakers
- Equipped with 40mm high-fidelity speakers (10mm thickness).
- Delivers loud, clear, and balanced sound optimized for helmet use.
IPX5 Waterproof
- Designed to withstand various weather conditions.
Specifications
| Feature | Detail |
|---|---|
| Model Name | D9 |
| Brand Name | MAXRUNON |
| Bluetooth Version | 5.3 |
| Speaker Unit | 40mm High-Fidelity Speakers |
| Microphone Type | Boom Mic (Omnidirectional), Wired Mic (Omnidirectional) |
| Maximum Number of Speakers (Intercom) | 2 |
| Maximum Intercom Distance | 500-1000m (in open areas) |
| Special Features | Waterproof, Voice Control, Universal Pairing Function, Noise Reduction, FM Radio |
| Noise Reduction Technology | CVC/DSP (Clear calls up to 100 km/h) |
| Waterproof Rating | IPX5 |
| Battery Capacity | 1000mAh (Built-in Battery) |
| Charging Time | Approx. 2 hours |
| Music Playback Duration | Approx. 12 hours |
| Intercom Call Duration | Approx. 12 hours |
| Standby Time | Approx. 350 hours |
| Intercom + Music Simultaneous Use | Approx. 24 hours |
| Auto Voice Priority | Supported (music volume lowers during calls) |
| Software Update | Not supported |
| Connection Mode | Bluetooth |
| Certification | CE, RoHS, WEEE, FCC |
| Origin | Mainland China |
| Plug Type | EU Plug (for charger) |
Troubleshooting
- Factory Reset: If the device is not functioning correctly, you can perform a factory reset. Press and hold the Volume + and Volume - buttons simultaneously for 3 seconds. The product will restart silently after 30 seconds.
- Microphone On/Off: To toggle the microphone on or off, press and hold the Intercom button and any volume button simultaneously for 2 seconds.
- Connectivity Issues: Ensure your smartphone's Bluetooth is enabled and the D9 is in pairing mode. If issues persist, try restarting both devices.
- Sound Quality: Check speaker placement within the helmet. Ensure they are directly over your ears for optimal sound.
User Tips
Based on general user feedback for similar devices:
- Optimal Speaker Placement: Take time to adjust the speakers precisely over your ears for the best audio clarity and volume, especially at higher speeds.
- Microphone Positioning: For clear communication, position the microphone as close to your mouth as possible without obstructing your vision or comfort. Use the included windproof cover for the boom mic to reduce wind noise.
- Battery Management: Fully charge the device before long rides. While the battery life is extensive, consistent charging habits ensure readiness.
- Firmware Updates: Although the current model does not support software updates, always check the manufacturer's website for any future announcements regarding new models or features.
Maintenance
- Cleaning: Wipe the main unit and speakers with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: If the device will not be used for an extended period, charge it fully every 3 months to prolong battery life.
- Water Exposure: While IPX5 waterproof, avoid submerging the device in water. Ensure the Type-C port cover is securely closed during wet conditions.
Warranty & Support
For customer support, please contact:
- Email: japan@maxrunon.com
A detailed user manual in PDF format is available for download: MAXRUNON D9 User Manual (PDF)
Regulatory Information
Radio Exposure Statement
This device complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC Warning
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.