Yieryi PH-2023-D

Contents

Yieryi Digital pH Meter PH-2023-D User Manual

Model: PH-2023-D | Brand: Yieryi

1. Introduction

The Yieryi Digital pH Meter PH-2023-D is a high-precision instrument designed for measuring pH and temperature in various applications. With a 0.01 pH resolution and automatic temperature compensation (ATC), it provides accurate readings for food, aquariums, pools, drinking water, hydroponics, and laboratory tests. Its lightweight and portable design, along with a clear digital display, makes it convenient for both professional and home use.

Yieryi Digital pH Meter in its case with fruits and cheese, showing pH and temperature ranges.
Figure 1: Yieryi Digital pH Meter PH-2023-D in its protective case, illustrating its application for pH and temperature measurement.

2. Product Overview

Familiarize yourself with the components of your pH meter:

Diagram of the Yieryi pH meter with labels for battery compartment, screen display, 6.86 keys, power button/CAL keys, °C/°F switch key, 4.00 keys, replaceable probe, and high precision probe.
Figure 2: Labeled components of the PH-2023-D pH Meter.
  • Battery Compartment: Houses 2*1.5V AAA batteries.
  • Screen Display: HD large screen for clear numerical values.
  • 6.86 Keys: Used during calibration.
  • Power Button/CAL Keys: Turns the device on/off and initiates calibration.
  • °C/°F Switch Key: Toggles between Celsius and Fahrenheit temperature units.
  • 4.00 Keys: Used during calibration.
  • Replaceable Probe: High precision electrode, designed for easy replacement if damaged over time.

3. Setup

3.1. Battery Installation

  1. Locate the battery compartment cover on the back of the device.
  2. Slide open the cover.
  3. Insert 2*1.5V AAA batteries, ensuring correct polarity.
  4. Close the battery compartment cover securely.

3.2. Calibration Preparation

Before first use or after prolonged storage, calibrate the pH meter for accurate readings.

  1. Prepare two clean cups with 250ml of distilled water each.
  2. Dissolve one packet of PH4.00 calibration powder into one cup and one packet of PH6.86 calibration powder into the other cup. Stir until fully dissolved.
Video 1: Demonstration of pH meter calibration and usage.

3.3. Calibration Procedure (2-Point Calibration)

  1. Turn on the pH meter by pressing the Power button.
  2. Insert the electrode into the standard buffer solution of pH 6.86.
  3. Long press and hold the 'CAL' button for 5 seconds until the display shows 'CAL'.
  4. Short press the '6.86' button. The meter will automatically calibrate to pH 6.86.
  5. Clean the electrode with distilled water and gently wipe it dry.
  6. Insert the electrode into the standard buffer solution of pH 4.00.
  7. Long press and hold the 'CAL' button for 5 seconds until the display shows 'CAL'.
  8. Short press the '4.00' button. The meter will automatically calibrate to pH 4.00.
  9. Clean the electrode with distilled water and gently wipe it dry.
  10. The pH meter is now calibrated and ready for use.

4. Operating Instructions

4.1. Taking a Measurement

  1. Ensure the meter is calibrated.
  2. Remove the protective cap from the electrode.
  3. Immerse the electrode into the sample solution or substance you wish to test. Ensure the electrode is fully submerged.
  4. Gently stir the meter and wait for the reading to stabilize on the display.
  5. Record the pH and temperature readings.
  6. After use, clean the electrode thoroughly as described in the Maintenance section.
  7. Replace the protective cap.
Images showing the Yieryi pH meter being used for fruits and vegetables, meat, noodles & pastries, and cheese.
Figure 3: Examples of the pH meter's wide range of applications.

4.2. Switching Temperature Units (°C/°F)

Press the '°C/°F' button to toggle between Celsius and Fahrenheit temperature displays.

5. Maintenance

5.1. Electrode Cleaning

The electrode is highly sensitive and requires proper care to maintain accuracy and prolong its lifespan.

Close-up of the Yieryi pH meter's high precision sensitive electrode, with text advising to keep it clean and wash with distilled water.
Figure 4: Close-up of the high precision sensitive electrode.
  1. After each use, rinse the electrode thoroughly with distilled water or purified water.
  2. Gently wipe the electrode with a soft, clean cloth or tissue.
  3. Do not collide or rub the electrode forcefully during cleaning to avoid damage.

5.2. Storage

  • Always replace the protective cap after use to keep the electrode moist and protected.
  • Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.

5.3. Probe Replacement

The probe is replaceable, which extends the service life of the meter. If the probe becomes damaged or its performance degrades significantly over time, it can be replaced. Refer to the detailed user manual (PDF) for specific instructions on probe replacement.

Detailed view of the Yieryi pH meter showing large capacity battery compartment, HD large screen display, and replaceable probe mechanism.
Figure 5: Product details highlighting the replaceable probe and battery compartment.

6. Troubleshooting

6.1. Common Issues and Solutions

ProblemPossible CauseSolution
Inaccurate readingsUncalibrated meter, dirty electrode, expired buffer solutions, damaged electrode.Perform calibration, clean the electrode, use fresh buffer solutions, replace electrode if damaged.
Meter does not turn onDead batteries, incorrect battery installation.Replace batteries, check battery polarity.
Low battery indicatorBatteries are low.Replace batteries immediately to ensure accurate readings.

7. Specifications

Table of Yieryi pH meter product parameters including range, resolution, accuracy, ATC, battery, operating temperature, calibration, shut-down, dimensions, and weight.
Figure 6: Detailed product parameters.
ParameterValue
ModelPH-2023-D
pH Range0.00 - 14.00 pH
pH Resolution0.01 pH
pH Accuracy±0.02 pH
Temperature Range0 - 50°C
Temperature Resolution0.1°C
Temperature Accuracy±1°C
ATC Range0 - 50°C
Calibration Mode1 Point (6.86) or 2 Points (4.01, 6.86)
Working Temperature0 - 50°C
Features°C/°F Switch, Low Battery Indicator
Battery2 x 1.5V AAA (Not Included)
Automatic Shut-down8 minutes
Dimensions207 * 32 * 36 mm (8.15 * 1.26 * 1.42 inches)
Weight85g
CertificationCE
Diagram showing the dimensions of the Yieryi pH meter: 207mm (8.15in) length, 36mm (1.42in) width, 32mm (1.26in) thickness.
Figure 7: Physical dimensions of the pH meter.

8. User Tips

  • Regular Calibration: Calibrate your pH meter regularly, especially if you notice inconsistent readings or after prolonged storage, to ensure optimal accuracy.
  • Proper Cleaning: Always clean the electrode with distilled water after each use. This prevents contamination and extends the life of the probe.
  • Buffer Solutions: Use fresh calibration buffer solutions. Expired or contaminated solutions can lead to inaccurate calibration.
  • Temperature Compensation: The built-in Automatic Temperature Compensation (ATC) ensures accurate readings across a temperature range of 0-50°C, making it versatile for various environments.

9. Warranty and Support

The Yieryi Digital pH Meter PH-2023-D is CE certified, indicating compliance with European safety, health, and environmental protection standards.

For detailed warranty information, technical support, or to purchase replacement parts (such as probes or calibration powders), please refer to the official Yieryi website or contact your retailer. A comprehensive user manual in PDF format is available for download at this link.

© 2023 Yieryi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.