1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Skydroid HD 720P Three-body FPV Camera. This camera is designed for use with Skydroid H12 Pro, H16, H16 PRO, and H20 G20 remote controllers, offering high-definition FPV (First Person View) capabilities with integrated lighting.
2. Safety Information
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Always ensure proper handling and installation to prevent damage to the device or connected equipment. Disconnect power before making any connections or disconnections.
3. Product Overview
3.1 Components
- Skydroid HD 720P Three-body FPV Camera
- Adapter Cable
- Heat Shrink Tube (for securing connections)

Figure 1: Skydroid FPV Camera and Accessories
3.2 Features
- High-Definition Video: 720P@30FPS image transmission resolution.
- Integrated Lighting: Dual-channel LED lamps for enhanced visibility.
- Network Port: Utilizes a network port for video output signal interface.
- Efficient Output: RTSP streaming H265 output method.
- Wide Voltage Range: Supports working voltage from 13V to 80V.
- Compact Design: Dimensions of 102.1x42.5x36.2mm and a weight of 107g.

Figure 2: Front view of the camera with LED lights
4. Specifications
| Attribute | Value |
|---|---|
| Product Name | Skydroid HD 720P Three-body Network Port FPV Camera |
| Image Transmission Resolution | 720P@30FPS |
| Brand | Skydroid |
| Compatible Remote Controllers | H12 Pro, H16, H16 PRO, H20 G20 |
| Dimensions (LxWxH) | 102.1 x 42.5 x 36.2 mm |
| Weight | 107g |
| Video Output Signal Interface | Network port |
| Working Voltage | 13V~80V |
| Working Current | 90mA |
| LED Power | 6W |
| Output Method | RTSP streaming H265 |
| Pixel | 2MP |
| Aperture of the Light Port | F2.2 |
| Focal Length | 2.8mm |
| Material | Composite Material |

Figure 3: Camera Dimensions
5. Setup
5.1 Unboxing and Initial Inspection
Carefully remove the camera and all accessories from the packaging. Inspect all components for any signs of damage. Ensure all listed components are present.
Video 1: Unboxing and Connection Demonstration
5.2 Wiring Instructions
The camera requires power and data connections. Refer to the diagram below for correct wiring to your compatible Skydroid remote controller board (e.g., R12 PRO V1.0).
- Power Supply: Connect the power wires to a voltage source ranging from 13V to 80V. The red wire is for the positive pole, and the black wire is for the negative pole.
- Data Connection: Connect the receiver data to the DuPont connector. Ensure the adapter cable is correctly attached to the camera's data port and then to the remote controller's board.

Figure 4: Wiring Diagram for R12 PRO V1.0 Board
The diagram indicates connections for EHT0_TX+, EHT0_TX-, ETX0_RX+, and ETX0_RX- on the R12 PRO V1.0 board. Match these to the corresponding wires from the camera's adapter cable.
6. Operating Instructions
6.1 Initial Power-Up
Once correctly wired, power on your remote controller and the FPV camera. The camera should initialize and begin transmitting video data via its network port.
6.2 Firmware Upgrade
To ensure optimal performance and access to the latest features, it is recommended to keep your camera's firmware updated.
- Ensure your remote control is connected to the internet.
- Navigate to the camera settings or update section on your remote controller's interface.
- Click "Check for Updates" to view the camera's current firmware version and the latest available online update.
- If an upgrade is needed, click "Update Now" to begin the online upgrade process. This process typically takes approximately 2 minutes.

Figure 5: Camera Firmware Update Interface
6.3 Accessing Video Feed
The camera outputs RTSP streaming (H265). Refer to your Skydroid remote controller's manual for specific instructions on how to access and view the FPV video feed.
6.4 Usage Process QR Code
The bottom of the camera features a QR code. This QR code may provide quick access to additional usage information or online resources. Scan it with a compatible device for more details.

Figure 6: Camera Bottom with Usage Process QR Code
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera lens and body. Avoid abrasive materials or harsh chemicals.
- Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Cable Inspection: Regularly check all cables and connectors for wear or damage. Replace any damaged components immediately.
8. Troubleshooting
- No Video Feed:
- Check all power and data connections to ensure they are secure and correctly wired.
- Verify that the camera and remote controller are powered on.
- Ensure the remote controller's firmware and the camera's firmware are up to date.
- Consult your remote controller's manual for specific FPV setup instructions.
- Poor Video Quality:
- Check for obstructions to the camera lens and clean if necessary.
- Ensure adequate lighting conditions, especially if the integrated LEDs are not sufficient.
- Verify that the camera is within the effective range of the remote controller's image transmission system.
- Camera Not Responding:
- Power cycle both the camera and the remote controller.
- Recheck all connections.
- If the issue persists, consider performing a firmware re-installation or contacting support.
9. User Tips
No specific user tips are available from provided reviews or Q&A. Always ensure secure connections and proper power supply within the specified voltage range for optimal performance.
10. Frequently Asked Questions (FAQ)
- Q1: Are you a manufacturer or a trading company?
- A: We are a trading company working closely with multiple reputable manufacturers. This allows us to offer a wide range of products and flexible solutions at competitive prices.
- Q2: Do you have a minimum order quantity (MOQ)?
- A: No MOQ requirement — we’re happy to support small or trial orders to help you start easily.
- Q3: How do you ensure product quality?
- A: We source all products directly from trusted factories. Before shipping, every item goes through strict quality checks, including unboxing inspections and functional testing, to ensure they meet our standards.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.