Urlife E26

Contents

Urlife E26 Urban Commuting E-bike User Manual

Model: E26

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and care of your Urlife E26 Urban Commuting Electric Bicycle. Please read this manual thoroughly before your first ride and keep it for future reference. Adherence to these instructions will ensure optimal performance and longevity of your e-bike.

2. Safety Information

WARNING:

  • Always wear a helmet and appropriate safety gear when riding.
  • Familiarize yourself with local laws and regulations regarding electric bicycles.
  • Do not operate the e-bike under the influence of alcohol or drugs.
  • Perform pre-ride checks before each use (brakes, tires, battery, lights).
  • Exercise caution in wet conditions, on uneven terrain, or at night.
  • Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
  • While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

Note on Motor Wattage and Speed Limit: The E26 electric bicycle features a peak power output of 750W and a rated power of 350W. To comply with UK regulations, the motor is labeled as 250W, and the maximum speed is limited to 25 km/h. If you wish to remove the speed limit, please contact customer service for guidance.

3. Product Overview

The Urlife E26 is designed for urban commuting and versatile riding. Key components include:

Urlife E26 Electric Bike with 750W motor, 36V 13Ah battery, LCD display, and 26-inch tires.
Figure 3.1: Urlife E26 Electric Bike Overview
  • Motor: 750W Peak Motor (labeled 250W for compliance)
  • Battery: Removable 36V 13Ah Lithium Battery with BMS Safety Protection
  • Display: LCD Meter display showing battery indicator, 3 assisted levels, current speed, and mileage.
  • Gears: 7-Speed Shimano Gears
  • Brakes: Front & Rear Disc Brakes
  • Suspension: Front Fork Suspension
  • Frame: Carbon Steel
  • Wheels: 26-inch tires, suitable for various terrains (City Road, Soil, Sand, Snow).
  • Additional Features: Front Light, Rear Rack & Reflector.
Detailed view of Urlife E26 features including Carbon Steel frame, Front Light, Front & Rear Disc Brakes, and Rear Rack & Reflector.
Figure 3.2: Key Features of the E26 E-bike

4. Specifications

Feature Specification
Model NumberE26
CertificationCE
Rated Passenger CapacityTwo Seat
StyleMulti-use Design
Max Speed<25km/h (UK compliant) / Up to 32km/h (unrestricted)
Range per Power31 - 60 km (Pure Electric: 40-60 km, Pedal-Assist: 80 km)
Wattage200 - 250w (Rated), 750W (Peak)
Power SupplyLithium battery
Voltage36V
Power SourceLithium battery
FoldedNo
Motor TypeBrushless
Wheel Size26“
Frame MaterialCarbon Steel
Battery Capacity13Ah
Charging Time3-5 hours (Fast Charging)
Waterproof RatingIP54
Max Slope30°
Motor Torque40N.M
Bicycle Weight27KG
Maximum Load120KG
Suggested Height5'4" - 6'5" (162cm - 195cm approx.)
Urlife E26 Electric Bike size chart with dimensions and suggested rider height, bicycle weight, and maximum load.
Figure 4.1: E-bike Dimensions and Rider Suitability

5. Setup and Assembly

Your Urlife E26 e-bike may require some assembly upon arrival. Please follow these general steps. Refer to the included assembly guide for detailed, step-by-step instructions and diagrams.

  1. Unpacking: Carefully remove all components from the packaging. Retain packaging for potential future transport or returns.
  2. Handlebar Installation: Attach the handlebar to the stem, ensuring all bolts are securely tightened.
  3. Front Wheel Installation: Install the front wheel, making sure the disc brake rotor is correctly aligned with the caliper.
  4. Pedal Installation: Attach the pedals. Note that pedals are typically marked 'L' for left and 'R' for right, and have different thread directions.
  5. Seat Post and Saddle: Insert the seat post into the frame and adjust the saddle height to a comfortable riding position. Ensure the quick-release lever or bolts are securely fastened.
  6. Battery Installation: Insert the removable battery into its compartment. Ensure it clicks securely into place.
  7. Initial Charge: Fully charge the battery before your first ride.
  8. Pre-Ride Check: Before riding, check tire pressure, brake function, and ensure all bolts and quick releases are tight.

6. Operating Instructions

6.1 Battery Charging

Removable 36V 13Ah Lithium Battery with BMS Safety Protection, showing 40-45 KM Travel Range, 3-5H Fast Charging, and IP54 Waterproof rating.
Figure 6.1: E-bike Battery Features
  • The 36V 13Ah lithium battery is removable for convenient charging.
  • Connect the charger to the battery charging port, then plug it into a power outlet.
  • A full charge typically takes 3-5 hours.
  • Do not overcharge the battery. Disconnect the charger once fully charged.
  • Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.

6.2 LCD Display and Controls

LCD Display showing Battery indicator, 3 Assisted Levels, Current Speed, and Mileage.
Figure 6.2: LCD Display Interface

The LCD display provides real-time information about your ride:

  • Battery Indicator: Shows remaining battery level.
  • Assisted Level: Indicates the current level of pedal assistance (typically 1-3).
  • Current Speed: Displays your current riding speed.
  • Mileage: Tracks your trip distance.

Use the control buttons near the display to power on/off, change pedal assist levels, and cycle through display modes.

6.3 Riding Modes

Diagram illustrating three riding modes: Classic Ride (Sport Mode), Pure Electric (60 KM range), and Pedal-Assist (80 KM range).
Figure 6.3: Available Riding Modes

The Urlife E26 offers three distinct riding modes:

  • Classic Ride (Sport Mode): Standard cycling experience with no electric assistance, relying solely on pedal power.
  • Pure Electric Mode: The e-bike is propelled solely by the motor, without requiring pedaling. Provides a range of approximately 60 km.
  • Pedal-Assist Mode: The motor provides assistance as you pedal, making riding easier, especially on inclines. Offers an extended range of approximately 80 km.

Switch between modes using the controls on the handlebar.

6.4 Gear Shifting

Close-up of the 7-speed gear shifter on the handlebar.
Figure 6.4: 7-Speed Gear Shifter

The e-bike is equipped with 7-speed Shimano gears for smooth shifts. Use the shifter on the handlebar to select appropriate gears for different terrains and speeds.

7. Maintenance

  • Regular Cleaning: Clean your e-bike regularly with a damp cloth. Avoid high-pressure washing directly on electrical components.
  • Tire Pressure: Check tire pressure before each ride and inflate to the recommended PSI.
  • Brake Inspection: Regularly inspect brake pads and rotors for wear. Ensure brakes are responsive and properly adjusted.
  • Chain Lubrication: Keep the chain clean and lubricated for smooth operation and to prevent rust.
  • Battery Care: Do not fully discharge the battery. If storing for extended periods, charge it to 50-70% and recharge every 1-2 months.
  • Fasteners: Periodically check all bolts, nuts, and quick releases for tightness.
  • Professional Service: For complex repairs or adjustments, consult a qualified bicycle mechanic.

8. Troubleshooting

Problem Possible Cause Solution
E-bike does not power on Battery not installed correctly, battery discharged, power button not pressed correctly. Ensure battery is fully seated. Charge the battery. Press and hold the power button for a few seconds.
Motor not assisting Pedal assist level set to zero, battery low, motor connection issue. Increase pedal assist level on the display. Charge the battery. Check motor cable connections.
Brakes feel weak Worn brake pads, misaligned calipers, air in hydraulic system (if applicable). Inspect and replace brake pads if worn. Adjust caliper alignment. Consult a professional for hydraulic brake issues.
Short battery range Under-inflated tires, riding in high assist levels, heavy load, cold weather. Maintain correct tire pressure. Use lower assist levels. Reduce load. Battery performance can be reduced in cold temperatures.

9. User Tips

  • Adjust Seat Height: Proper seat height is crucial for comfort and pedaling efficiency. Your leg should have a slight bend at the knee when the pedal is at its lowest point.
  • Vary Riding Modes: Utilize the different riding modes to conserve battery life or get an extra boost when needed. Pedal-assist mode offers the best balance of effort and range.
  • Regular Checks: A quick check of tire pressure, brakes, and battery level before each ride can prevent many common issues.
  • Secure Battery: Always ensure the removable battery is securely locked in place before riding to prevent it from dislodging.

10. Warranty and Support

All Urlife E26 electric bicycles sold by our store come with a one-year warranty from the date of purchase.

For any issues, anomalies, or quality concerns, please contact our Customer Service team directly. Do not open a dispute or leave negative feedback immediately. Our team is committed to resolving your concerns swiftly and appropriately.

Contact Customer Service: Refer to your purchase platform or seller information for direct contact methods.

11. Disclaimer

Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations. The manufacturer and seller are not responsible for any damage or injury caused by improper use, modification, or failure to follow the instructions in this manual.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.