1. Package Contents
Before assembly, please ensure all items are present and in good condition. The package should contain the following:
- (1) iF1 Electric Scooter
- (2) Stem Bolts (for handlebar attachment)
- (3) Rear Fender
- (4) Tool (Allen wrench)
- (5) Charger
- (6) User Manual + Safety Instructions

2. Product Overview
Familiarize yourself with the different parts of your iScooter iF1 Electric Scooter:

- Control Unit
- Brake Levers
- Folding Hook Catch
- Display
- Headlight
- Throttle
- Folding Mechanism
- Charging Port
- Front Suspension
- Kickstand
- Rear Shock
- Rear Fender
- Taillight + Brake Light + Turn Signals
- Footrest
3. Setup and Assembly
The iScooter iF1 requires minimal assembly. Follow these steps to get your scooter ready:
3.1 Unfolding the Scooter
- Raise the stem to the riding position until the folding latch clicks securely in place.
3.2 Attaching the Handlebars
- Align the handlebars with the stem.
- Insert the provided stem bolts into the designated holes and tighten them using the included tool. Ensure they are firmly secured.
3.3 Attaching the Rear Fender
- Position the rear fender over the rear wheel.
- Secure the fender using the provided screws and tool.

3.4 Visual Guide: Installation Operation
Video 1: Demonstrates the installation process, including unfolding, handlebar attachment, and fender installation (0:00 - 0:35).
4. Operating Instructions
4.1 Power On/Off
- To power on the scooter, press and hold the Power button on the display.
- To power off, press and hold the Power button again. The scooter will automatically power off after 10 minutes of inactivity.
4.2 Lights
- Press the Headlight switch to turn on/off the front headlight and rear taillight simultaneously.
4.3 Turn Signals
- Toggle the turn signal switch (located on the left handlebar) to activate left or right turn signals.
4.4 Multi-function LCD Display
The LCD display provides real-time operating data at a glance:

- Turn Signals
- Error Prompt
- Headlight
- Real-time Speed / Error Code
- Motor Overheating Alarm
- Brake Applied
- Riding Modes (RACE, SPORT, ECO)
- TRIP: Trip Distance / ODO: Total Distance
- App Connected indicator
- Cruise Control Mode indicator
- Low Battery Prompt
- Battery Level indicator
- Scooter Locked (via App) indicator
4.5 Riding Modes
The scooter features four cycling modes. To adjust, grasp the brake lever and press the power button five times.

| Riding Mode | Standard Speed (km/h) | Unlocked Speed (km/h) | Unlocked Speed (mph) |
|---|---|---|---|
| Original | 6 | 15 | 9 |
| ECO | 10 | 25 | 15 |
| SPORT | 15 | 35 | 21 |
| RACE | 25 | 45 | 28 |
4.6 Switching TRIP and ODO
- Double-press the “S” button on the control unit to switch between Trip Distance (TRIP) and Total Distance (ODO).
4.7 Selecting Riding Mode
- Press the “S” button to cycle through available riding modes.
4.8 Imperial/Metric Units
- Press the “M” button on the control unit to switch between imperial (mph) and metric (km/h) units.
4.9 Power On Operation Visual Guide
Video 2: Demonstrates powering on the scooter, activating lights and turn signals, and adjusting speed modes (0:36 - 1:04).
5. App Connection
The iScooter iF1 supports connection to the iScooter Club APP for enhanced control and monitoring. Scan the QR code below to download the app.

5.1 Connecting to the App
- Download the 'iScooter Club' app from your smartphone's app store or by scanning the QR code provided in the manual (see Figure 7).
- Open the app and follow the on-screen instructions to connect to your scooter. This typically involves scanning a QR code located on the scooter's stem.

5.2 App Features
Once connected, the app allows you to:
- View Ride Records
- Monitor Battery Usage
- Check Observed Speed
- Activate Cruise Control
- Enable Zero Start
- Lock/Unlock the Vehicle
- Control Headlight Switch
5.3 App Connection Visual Guide
Video 3: Demonstrates the process of connecting the scooter to the iScooter Club App via QR code (1:04 - 1:40).
6. Charging
Proper charging is essential for battery longevity and safety.
6.1 Charging Process
- Ensure the scooter is powered off before charging.
- Open the charging port cover.
- Connect the charger to the charging port on the scooter, then plug the charger into a power outlet.
- The charger indicator light will be red during charging and turn green when fully charged.
- Do not overcharge the scooter. Disconnect the charger once the battery is full.
- The scooter cannot be powered on while charging.
- Always keep the charging port cover closed when not charging to protect it from dust and moisture.
- Only use the original charger provided with your iScooter iF1.
6.2 Charging Operation Visual Guide
Video 4: Demonstrates the correct procedure for charging the iScooter iF1 Electric Scooter (1:40 - 1:46).
7. Folding Operations
The iScooter iF1 features a fast-folding design for easy storage and transport.
7.1 Folding the Scooter
- Ensure the scooter is powered off.
- Locate the folding mechanism on the stem.
- Release the folding latch/hook catch.
- Carefully fold the stem downwards until it locks into the rear fender hook.

7.2 Folding Operations Visual Guide
Video 5: Demonstrates the folding and unfolding operations of the iScooter iF1 Electric Scooter (1:46 - 1:56).
8. Maintenance
Regular maintenance ensures the longevity and safe operation of your scooter.
- Cleaning: Regularly wipe down the scooter with a damp cloth. Avoid using high-pressure water jets or corrosive cleaners.
- Tires: Check tire pressure periodically. Ensure tires are free from punctures or excessive wear. The 10-inch vacuum off-road tires are designed for durability and shock absorption.
- Brakes: Inspect the front electronic brake and rear disc brake system regularly for proper function. Ensure brake levers are responsive and brake pads are not excessively worn.
- Battery Care: Always use the original charger. Do not overcharge. Store the scooter in a cool, dry place when not in use, and ensure the battery is charged to at least 50% for long-term storage.
- Fasteners: Periodically check all bolts and screws, especially those on the handlebars and folding mechanism, to ensure they are tight.
- Charging Port: Keep the charging port cover closed when not charging to prevent dust and moisture ingress.
9. Troubleshooting (Error Codes)
The LCD display may show error codes if a problem occurs. Refer to the table below for common error codes and their meanings. If you encounter an error not listed or cannot resolve an issue, please contact customer support.
| Error Code | Meaning |
|---|---|
| E10 | Communication Fault |
| E14 | Throttle Fault |
| E15 | Brake Lever Fault |
| E16 | Motor Hall Sensor Fault |
| E50 | Over-Voltage Protection |
10. Specifications
Detailed technical specifications for the iScooter iF1 Electric Scooter:
| Feature | Specification |
|---|---|
| Model Number | iF1 |
| Brand Name | iScooter |
| Category | Two-wheel Scooter |
| Applicable People | Unisex |
| Motor Power | 1200W (1001-2000W) |
| Voltage | 48V |
| Battery Capacity | 10Ah |
| Range Per Charge | 40-60km (40-50km typical) |
| Charging Time | 6-8h |
| Tire Size | 10 inch |
| Tire Type | Vacuum off-road tyres |
| Standard Speed | 6/10/15/25 km/h |
| Unlocked Speed | 15/25/35/45 km/h |
| Braking | Front & Rear disc brakes + E-ABS electronic brakes |
| LED Light | Headlight + Indicators + Rear Light |
| Incline | 25-30% |
| Waterproof Rating | IPX5 |
| Folded | Yes |
| Max Load Capacity | 330 lbs (150 kg) |
| Unfolded Size (L*W*H) | 118.5 x 63 x 122.5 cm (46.7 x 24.8 x 48.2 in) |
| Folded Size (L*W*H) | 115 x 20 x 50 cm (46.7 x 7.3 x 21.9 in) |
| Weight | 50 lbs (22.7 kg) |
| APP | iScooter Club APP |
| Certification | CE |

11. User Tips
Here are some helpful tips from other users to enhance your experience with the iScooter iF1:
- Unboxing Inspection: Upon receiving your scooter, carefully check the display and other components to ensure they are securely attached and undamaged. One user reported the display being stuck to the packaging, requiring reattachment.
- Speed Customization: The scooter offers various speed modes (Original, ECO, SPORT, RACE) with different maximum speeds. You can adjust these settings via the scooter's display or the iScooter Club APP to match your riding preferences and local regulations.
- Optimal Load: For the best riding experience and to maximize range, it is recommended to keep the load at around 70% of the maximum capacity (150 kg / 330 lbs).
12. Safety Guidelines
Your safety is paramount. Please read and adhere to the following guidelines:
- General Safety: Always wear appropriate protective equipment, including a helmet, knee pads, and elbow pads, while riding.
- Legal Compliance: Fully comply with all applicable local laws and regulations regarding electric scooter usage.
- Charging and Storage: Strictly follow the instruction manual for charging and storage to prevent potential fire risks. Use only the original charger.
- Children: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Children should be supervised to ensure they do not play with the appliance.
- RF Exposure: This device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions.
13. Warranty & Support
For any questions, technical support, or warranty claims, please contact the manufacturer or seller directly.
- Manufacturer: Shenzhen Xincheng Times Technology Co., Ltd
Email: support@iscooterglobal.eu - EU Representative (EC REP): GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
Add: CASTELLANA 9144, 28046 Madrid
Email: compliance.gavimosa@outlook.com
Tel: +34 688185858 - User Manual (PDF): A detailed PDF version of the user manual is available for download. Please refer to the product page or contact support for the link: View User Manual (PDF)
- Declaration of Conformity: For the full text of the EU Declaration of Conformity, visit: https://www.iscooterglobal.de/pages/konformitatserklarung
13.1 Disposal of Electrical and Electronic Equipment
The crossed-out garbage can symbol indicates that the device must be disposed of separately from unsorted municipal waste. Do not dispose of it in the residual waste bin or yellow bin. If the product contains non-permanently installed batteries, they must be removed and disposed of separately.