1. Product Information
| Product Name | Connector (Power Panel Socket Power Supply Board) |
| Model | JQ-001, JQ-002, JQ-003, JQ-004 |
| Brand | LAJQTAO |
| Voltage | DC 5V / 100-240V~ |
| Power | 10W, 20W, 30W |
| Material | Plastic, copper, stainless steel |
| Certification | CE |
| Origin | Mainland China |
2. Safety Warnings
- WARNING: Risk of electric shock. Do not open, disassemble, or repair the device.
- WARNING: Keep away from heat, fire, and water.
- WARNING: Not suitable for children under 3 years. Choking hazard.
- CAUTION: For indoor use only.
- CAUTION: Unplug the device when not in use or during cleaning.
Note: This manual focuses on English instructions. For other languages (French, German, Spanish, Italian), please refer to the original PDF user manual.
3. Setup and Installation
This section provides general guidance for the installation of the power panel. Professional installation is recommended due to the nature of the product.
- Ensure the JBL Partybox 110 is completely powered off and disconnected from all power sources before beginning installation.
- Carefully access the internal components of the JBL Partybox 110 to locate the existing power panel socket or the designated installation area for the new board.
- Align the LAJQTAO Power Panel Socket Power Supply Board with the corresponding connectors and mounting points within the JBL Partybox 110.
- Secure the board using appropriate fasteners (not included, typically from the original device).
- Connect any necessary internal wiring or ribbon cables to the new power panel, ensuring correct polarity and secure connections.
- Once installed, reassemble the JBL Partybox 110, ensuring all covers and screws are properly secured.
Figure 1: Views of the LAJQTAO Power Panel Socket Power Supply Board.
Figure 2: Different perspectives of the power supply board.
4. Operating Instructions
After successful installation of the power panel socket power supply board:
- Connect the power adapter to a suitable electrical socket.
- Press the power button on your JBL Partybox 110 to turn it on.
- Select desired functions via the control panel on the device or through its associated mobile application (if applicable).
- After use, press the power button to turn off the device, then unplug the power adapter from the electrical socket.
Video 1: Demonstrating the physical handling and inspection of the power panel socket power supply board.
5. Maintenance and Care
- Always unplug the device from the power source before cleaning.
- Use a soft, dry cloth to wipe the surface of the device.
- Do not use water, alcohol, or chemical cleaners, as these can damage the electronic components.
- Store the device in a dry and cool place when not in use.
6. Troubleshooting
If you encounter issues with your JBL Partybox 110 after installing the LAJQTAO Power Panel Socket Power Supply Board, consider the following:
- Device not powering on: Ensure all connections to the power supply board are secure and correctly seated. Verify that the power adapter is functioning and connected to a live electrical outlet.
- Intermittent power: Check for loose connections or any visible damage to the power supply board or its components.
- Unusual smells or sounds: Immediately disconnect power and contact a qualified technician. Do not attempt to repair the board yourself.
For complex issues, it is recommended to consult with a professional electronics repair technician.
7. Specifications
| Input Voltage | 100-240V~ |
| Output Voltage | DC 5V (Also compatible with 1V, 2V, 4V, 12V, 20V, 30V systems as per product attributes) |
| Power Output | 10W, 20W, 30W |
| Wireless Functionality | No |
| Battery Included | No |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
| Package Dimensions (approx.) | Length: 15 cm, Width: 3 cm, Height: 18 cm |
| Package Weight (approx.) | 0.35 kg |
For a detailed PDF version of the user manual, please refer to the official document: LAJQTAO Power Panel User Manual (PDF).
8. Warranty and Support
This product is manufactured by Zhongshan Qingtao Electronic Products Co., Ltd.
- Manufacturer: Zhongshan Qingtao Electronic Products Co., Ltd
- Manufacturer Address: China Room 502, Building B1, Fuliyuan, No. 3 Peninsula Road, Shaxi Town, Zhongshan City, Guangdong Province
- Manufacturer E-mail: 371482226@qq.com
For customers in the European Union, the authorized representative is:
- EU Authorized Representative: LEDMAN TEKNOLOJI LIMITED ŞİRKETİ
- Address: Yenibosna Merkez, 1.Asena Sk. No:15,34295 Bahcelievler/Istanbul
- E-mail: turservices@authrepglobal.com
Please retain your proof of purchase for any warranty claims or support inquiries.