1. Introduction
Thank you for choosing the FULODE 4-Channel Professional Audio Mixer. This manual provides essential information for the safe and efficient operation of your new audio mixer. Please read this manual carefully before using the product and keep it properly for future reference.

2. Safety Information
- Do not expose this appliance to rain or moisture.
- Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified personnel.
- Ensure the power supply matches the voltage requirements of the mixer.
- Avoid placing the mixer in direct sunlight or near heat sources.
- Always turn off the mixer and disconnect the power before making any connections or disconnections.
3. Product Overview
The FULODE Professional Audio Mixer is designed for precise sound shaping and versatile audio mixing. It features multiple input channels, 99 DSP effects, Bluetooth and USB playback, and phantom power for condenser microphones.
Key Features:
- Professional Channel Control: Each channel includes a 3-band equalizer, a COMP knob for smooth compression, and two AUX controls for flexible effects or monitor routing.
- 99 DSP Effects: Built-in digital signal processing with 99 preset effects for enhancing audio.
- Bluetooth and USB Playback: Supports Bluetooth 5.0 for wireless audio streaming and USB flash drives for MP3 playback.
- +48V Phantom Power and PAD Button: Independent +48V phantom power for condenser microphones and PAD attenuation for high-output instruments.
- Real-time Monitoring: Integrated monitoring allows for accurate adjustments.
- Wide Compatibility: Supports various inputs including microphones, instruments, headphones, XLR, and 1/4-inch plugs.

Panel Function Introduction:

- Single Input Channel (Line/Mic): Composite microphone/line input jacks for connecting microphones and other audio devices. Supports XLR and 6.35mm plugs.
- 5/6 Channel Stereo 6.3mm Input Interface: Used for connecting 5/6 stereo channels with 6.3mm plugs.
- +48V Control Button and Indicator Light: When pressed, the +48V indicator lights up, supplying DC +48V phantom power to the XLR interfaces for condenser microphones.
- Attenuation Button (PAD): Pressing this button attenuates the input audio signal, suitable for large audio signal inputs.
- 5/6, MP3 Switch Button: Toggles between 5/6 channels and MP3 audio playback output. When pressed, the MP3 audio signal is played.
- Gain Knob: Adjusts the amplifier's gain to match the input signal sensitivity.
- COMP Control Knob: Adjusts the compression level applied to the channel. Rotating right increases compression and automatically adjusts output gain for a smoother, more dynamic effect. Avoid excessively high compression to prevent feedback.
- High, Mid, Low EQ Knobs: High-quality three-band tone controls for adjusting the timbre of the sound.
- Independent AUX and Effect Adjustment Knob: Adjusts the AUX and AUX effect output volume for each line.
- Left and Right Channel Knobs: Adjusts the independent left and right channel balance for each input.
- Volume Knob: Adjusts the channel's send level to the main output and headphone volume.
- Main Output XLR: Used for connecting the main signal output to active speakers or power amplifiers.
- RCA Input Sockets: For connecting RCA input sources.
- RCA Recording Output Sockets: For recording output.
- AUX Output Interface: Auxiliary output.
- 2.5mm Headphone Jack: Monitor output for connecting external monitoring headphones.
- BT/MP3 Player: Supports Bluetooth connection for music playback, MP3 format USB disk input, and computer connection for music playback. Includes adjustable functions and song selection.
- 99 DSP Effect Selection and Confirmation: Use the left and right knobs to select from 99 effects, then press to confirm.
- RCA Output/MP3 Volume Adjustment Knob: Adjusts the volume for RCA output and MP3 playback.
- AUX1/2 Volume Adjustment: Adjusts the volume of the current AUX1/2 reverberation.
- Effect Volume Adjustment: Adjusts the volume level of the current effect.
- Phone Volume Knob: Adjusts the volume of the monitoring headphones.
- Level Indicator Light: Displays audio signal levels.
- Main Faders: Volume adjustment faders for the main stereo output.
- DC5V Power Interface: Power input connector.
- Power Switch Button and Indicator Light: Turns the unit on/off and indicates power status.
4. Specifications
Technical Parameters (MR Series - 4CH Model)
| Parameter | Value |
|---|---|
| Model | 4CH |
| Line Channel | 4 |
| Frequency Response | 20Hz-20KHz +1dB/-3dB |
| Stereo Input | 2 |
| MIC Input | 2 |
| Channel EQ | 3-band (HI, MID, LOW) |
| AUX Auxiliary Output | 2 AUX |
| Headphone Output | 1 |
| MIC Input Impedance | 2.4K |
| Output Input Level | +17dBu |
| Power Consumption | 10W |
| Effects | 99 DSP |
| Power Supply | DC 5V |
| Product Dimensions | 31.2cm (L) x 17.7cm (W) x 8cm (H) |

5. Setup Guide
Follow these steps to set up your FULODE Audio Mixer:
5.1 Power Connection
- Connect the provided power adapter to the DC5V Power Interface (25) on the mixer.
- Plug the power adapter into a suitable power outlet.
- Press the Power Switch Button (26) to turn on the mixer. The indicator light will illuminate.
5.2 Connecting Microphones and Instruments

- Condenser Microphones: Connect your condenser microphone to an available Single Input Channel (1) using an XLR cable. Press the +48V Control Button (3) for that channel to supply phantom power.
- Dynamic/Wired Microphones: Connect your dynamic or wired microphone to an available Single Input Channel (1) using an XLR or 6.35mm cable. Phantom power is not required for dynamic microphones.
- Instruments (e.g., Guitar): Connect your instrument to an available Single Input Channel (1) using a 6.35mm cable. If the instrument has a high output, engage the Attenuation Button (PAD) (4) for that channel to prevent signal clipping.
5.3 Connecting Output Devices
- Main Output: Connect active speakers or a power amplifier to the Main Output XLR (12) jacks using XLR cables.
- Headphones: Connect your monitoring headphones to the 2.5mm Headphone Jack (16). Adjust the volume using the Phone Volume Knob (22).
5.4 USB and Bluetooth Connections


- USB Playback: Insert a USB flash drive containing MP3 files into the USB port on the BT/MP3 Player (17). Use the player controls to navigate and play music.
- Bluetooth Connection: Activate Bluetooth on your smartphone or tablet. Search for the mixer's Bluetooth name (e.g., "X1-4C" or "SQ-MIXER") and pair. Once connected, you can stream audio wirelessly to the mixer.

6. Operating Instructions
6.1 Channel Control
- Gain (6): Adjust the Gain knob for each channel to achieve an optimal input level. The Level Indicator Light (23) should show green, occasionally peaking to yellow, but rarely red.
- EQ (8): Use the High, Mid, and Low EQ knobs to shape the tone of each channel.
- COMP (7): Turn the COMP knob clockwise to apply compression, which can smooth out dynamic range. Adjust carefully to avoid over-compression.
- AUX (9): Use the Independent AUX and Effect Adjustment knobs to send signals to external effects processors or monitor mixes.
- Left and Right Channel (10): Adjust the pan for each channel to position the sound in the stereo field.
- Volume Knob (11): Controls the individual channel volume sent to the main mix and headphones.
6.2 DSP Effects

- The mixer features 99 built-in DSP effects.
- Use the 99 DSP Effect Selection and Confirmation (18) knobs to browse through the available effects.
- Press the knob to confirm your selection.
- Adjust the Effect Volume Adjustment (22) to control the wet/dry mix of the effect.
6.3 USB/Bluetooth Playback
- When using USB or Bluetooth, ensure the 5/6, MP3 Switch Button (5) is pressed to select MP3 mode.
- Use the controls on the BT/MP3 Player (17) to play, pause, skip tracks, and adjust volume.
- The RCA Output/MP3 Volume Adjustment Knob (19) also controls the output level of the MP3 player.
6.4 Monitoring

- Connect headphones to the 2.5mm Headphone Jack (16).
- Adjust the monitoring volume using the Phone Volume Knob (22).
7. User Tips
- FX Program Selection: Some users have noted that the FX sound processing might primarily work in tremolo mode or default to it. If you are not getting the desired effect, ensure you have correctly selected and confirmed your preferred DSP effect using the 99 DSP Effect Selection and Confirmation knob (18). Experiment with different programs to find the best fit for your audio.
- Gain Staging: Proper gain staging is crucial for clear audio. Start with all gain knobs at minimum, then slowly increase the input gain for each channel until the signal is strong without clipping (avoiding red on the Level Indicator Light).
- PAD Button for Instruments: For instruments with high output levels, such as active guitars or keyboards, always engage the PAD button (4) to prevent input overload and distortion.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the mixer. Do not use liquid cleaners or aerosols, as they may damage the unit.
- Storage: When not in use, store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Management: Keep cables organized and free from kinks or excessive bending to prevent damage.
9. Troubleshooting
Common Issues and Solutions:
- No Sound Output:
- Check all power connections and ensure the mixer is turned on.
- Verify that input sources (microphones, instruments) are properly connected and powered (if applicable, e.g., +48V for condenser mics).
- Ensure channel volume knobs (11) and Main Faders (24) are turned up.
- Check connections to output speakers/headphones and ensure they are powered and their volume is up.
- Distorted Sound:
- Reduce the Gain knob (6) for the affected channel.
- Engage the Attenuation Button (PAD) (4) for high-output input sources.
- Check the COMP knob (7) setting; reduce if over-compressing.
- Ensure output levels are not clipping (Main Faders (24) and speaker/amplifier volume).
- Bluetooth Connection Issues:
- Ensure the mixer's Bluetooth is active and discoverable.
- Check that no other device is currently paired with the mixer.
- Try unpairing and re-pairing the device.
- Ensure the 5/6, MP3 Switch Button (5) is set to MP3 mode.
- Effects Not Working as Expected:
- Verify that the correct DSP effect is selected and confirmed using the 99 DSP Effect Selection and Confirmation (18) knob.
- Adjust the Effect Volume Adjustment (22) to increase the effect's presence.
- Check the AUX send levels for the channels you wish to apply effects to.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
A detailed user manual in PDF format is available for download. You can find it at: FULODE Audio Mixer User Manual (PDF)