1. Product Overview
The ESSGOO 10-inch Android 15 Car Stereo Radio is designed to upgrade the infotainment system in your BMW X1 E84 (2010-2015) vehicle. It features a high-definition capacitive touchscreen, integrated GPS navigation, wireless CarPlay and Android Auto, Bluetooth connectivity, and more.

Figure 1: ESSGOO 10-inch Android 15 Car Stereo with Wireless Carplay and Android Auto.
2. Setup and Installation
2.1 Compatibility Check
Before proceeding with installation, it is crucial to verify your vehicle's compatibility. This device is only suitable for BMW X1 E84 models (2010-2015) that do not have an original factory screen or a DSP audio system.

Figure 2: Compatibility check for car stereo installation. Ensure your vehicle does not have an original screen.

Figure 3: Important warning regarding DSP audio systems. If your vehicle has a DSP system, there will be no sound after installation. Do not purchase this product if your car has DSP.
2.2 Package Contents
Please check that all items are present in the package:

Figure 4: Included components in the package.
- 1 x 2 DIN Car Stereo Unit
- 1 x Radio Frame
- 1 x GPS Antenna
- 1 x Power Cable
- 1 x RCA Connection Cable
- 1 x CANBUS Box
- 1 x Reverse Line
- 1 x Antenna Adapter
- 2 x USB Cables (4-pin/6-pin)
- 1 x User Manual (PDF available online)
Optional accessories (not included): AHD Camera, DAB+ Box.
2.3 Installation Methods
There are three general ways to install the machine. Choose the method that best suits your vehicle's configuration. You may also refer to the original car radio's installation method.
- Screw-fixed Installation: The unit is secured using screws.
- Card Position Fixed Installation: The unit snaps into place using built-in clips or card slots.
- Special Frame Fixed Installation: The unit is mounted within a specific frame designed for your vehicle.
2.4 Wiring
Note: The following diagrams are for reference only. Please refer to the actual product and your vehicle's specific wiring for precise connections.
2.4.1 Main Harness Connection

Figure 5: Main harness wiring diagram.
Key Connections:
- Power: B+ (Battery Positive), ACC (Accessory), GND (Ground)
- Illumination: ILL
- Antenna Power: ANT.POWER
- Speaker Outputs: FR-/FR+ (Front Right), FL-/FL+ (Front Left), RR-/RR+ (Rear Right), RL-/RL+ (Rear Left)
- Control Wires: KEY-1, KEY-2 (Steering Wheel Control), BACK (Reverse Signal)
2.4.2 Back Interface Diagram
Identify the various ports on the rear of the head unit:

Figure 6: Rear interface diagram of the car stereo.
- Power Cable
- RCA Input/Output
- 8pin BREAK1.BACK_CVBSIFI/BT
- 2USB Cable
- Camera Input
- Radio antenna
- GPS Antenna
2.4.3 Rear View Camera Wiring (Optional)
If you are installing an optional rear view camera, follow this wiring guide:

Figure 7: Rear view camera wiring diagram.
- Reversing Trigger Line: Connect this wire to the reversing line in the power harness (e.g., Back (A6)).
- Camera Power Cable: Connect the red wire to the positive pole of the reverse light cable. Connect the black wire to ground (GND).
- Video Cable: Connect the video output from the camera to the Camera Input port on the head unit.
IMPORTANT: Whether you are using a rear view camera or not, please connect the rear view wire. Otherwise, your WiFi and Bluetooth signals may suffer!
2.4.4 DAB+ Antenna Installation (Optional)
If you have an optional DAB+ antenna, follow these steps for installation:

Figure 8: DAB+ antenna installation steps.
- Disassemble the plastic cover of the front pillar (passenger side).
- Remove the protective paper from the black film and transparent film on the antenna.
- Stick the black film to the metal frame and the transparent film to the glass (ensure space for reattaching the plastic cover).
- Pull the black film and transparent film tight and secure the cable.
- Reassemble the plastic cover (ensure the cable is not pinched).
3. Operating Instructions
3.1 Machine-Host Controls
The physical buttons and controls on the head unit are as follows:
| Symbol | Operation & Control |
|---|---|
| MIC | Built-in microphone hole |
| RST | Reset (press with a sharp object) |
| Power on the device. Press and hold for 3 seconds to power off. Short press repeatedly to mute or unmute. | |
| Go to main menu | |
| Return to the previous interface | |
| Press or hold repeatedly to increase volume | |
| Press or hold repeatedly to decrease volume |
3.2 On-Screen Main Interface
The main interface may vary slightly between product versions. Common icons and their functions include:
| Icon | Name | Operation |
|---|---|---|
| Main menu | Touch to switch screen to main menu | |
| Hide shortcut menu | Touch to hide the shortcut menu button area | |
| Backstage | Touch to show all programs running in the background | |
| Return | Touch to switch screens to return to previous screen | |
| Setting | Touch to enter settings | |
| Application | Touch to enter more app interface |
3.3 Car Settings
Access various vehicle-related settings and system configurations:
| Function | Description |
|---|---|
| Car Settings | Touch to enter settings. Enter password 8888 for factory settings. |
| Maps | Touch to enter Google Maps online. |
| Phonelink/TIMA | Touch to connect to mobile phone (Mirror Link). |
| Video | Touch to enter video playback. |
| Filemanager | Touch to enter file management. |
3.4 Core Functions

Figure 9: Overview of core functions.
3.4.1 Intelligent Voice Control (Optional)
Activate voice control by saying