Introduction
The SONICAKE Pocket Control is a portable wireless MIDI controller designed for modern musical setups. It features four fully programmable footswitches, offering versatile control over various devices. This controller supports both wired and wireless MIDI connectivity, making it suitable for stage and studio environments. It is equipped with a built-in rechargeable battery and a companion mobile app for intuitive programming.
The SONICAKE Pocket Control BT MIDI Controller.
Product demonstration video showcasing features and usage scenarios.
Safety Information
Handling
- Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately.
- Do not block any of the ventilation openings.
- Keep away from heat sources.
- Disconnect the unit during storms to prevent damage.
- Avoid operating this unit in strong electromagnetic fields.
Connecting the Power and Input/Output Jacks
- Always turn OFF the power to the unit and all other equipment before connecting or disconnecting any cables.
- Also make sure to disconnect all connection cables and the AC adapter before moving the unit.
Operation Instructions for the Power Supply Adapter
- Always use a DC5V adapter. Use of an adapter other than that specified could damage the unit or cause malfunction and pose a safety hazard.
- Pay attention to the voltage range requirements marked on the power supply.
- Unplug the unit during lightning storms or when unused for long periods of time.
Package Contents
- 1 x MIDI Controller
- 1 x User Manual (this document, also available as PDF: View PDF)
Product Overview
The SONICAKE Pocket Control features a clear digital display and four footswitches (A, B, C, D) for intuitive operation. Below is a detailed diagram of the unit's components:
Diagram of the Pocket Control unit with numbered components.
- Digital Display: Shows preset, mode, and other system information.
- A/B/C/D Keys: Press individually to send distinct MIDI messages. Press A+B to switch to previous preset. Press C+D to switch to next preset. Press B+C to toggle between modes. Long-press B+C to enable/disable Bluetooth functionality.
- APP/DEV Connection Status Indicator: Blinking blue (waiting for connection), Solid blue (device passively connected), Solid green (device actively connected), Solid cyan (simultaneous active/passive connection).
- Power Indicator: Green (>35% battery), Yellow (10%~35% battery), Red (<10% battery).
- USB Charging Port: Used for charging the unit.
- MIDI OUT/EXP Port: 1/4" (6.35mm) TRS Expression Pedal Input & MIDI Output. Connect expression pedals or transmit MIDI signals. For standard 5-pin MIDI ports, use an adapter cable (diagram in PDF manual).
- HOST Switch: Used to turn the MIDI HOST function on or off.
- USB Type-C Port: Functions for charging and USB MIDI transmission. When HOST switch is on, this device can act as a MIDI host to control other devices and can supply power to them (when the charging port is connected to a power source).
- Reset Button: Use when the device is unresponsive (requires a SIM ejector pin or similar tool).
- Power Switch: Press and hold to turn the device on or off.
Setup
Compatible Software
The Pocket Control can be managed using the free Pocket Control software on Android or iOS devices. This software allows for MIDI information editing, preset management, and firmware updates. Download the software from www.sonicake.com or search for "SONICLINK" in your device's app store.
App Connection (Bluetooth)
- With the device powered on, press and hold footswitches B+C simultaneously to activate the Bluetooth function.
- Turn on Bluetooth on your phone or tablet and open the SONICLINK app.
- Upon first use, the app will request Bluetooth connection permissions. Grant these permissions. The app will then automatically search for nearby devices.
- Once your Pocket Control appears in the device list, select it and tap "Connect Device" to complete pairing.
- The Pocket Control's connection status light will turn solid blue, indicating a successful Bluetooth connection.
Connecting to Other Gear (Wireless)
You can wirelessly connect the Pocket Control to a target device (e.g., a Pocket Master) and use an external pedal via the MIDI OUT/EXP port. The app can be used simultaneously while maintaining the wireless connection.
Wireless connection setup for controlling other devices like the Pocket Master with an external TRS pedal.
Connecting to a Computer (Wireless)
In this scenario, your Pocket Control is wirelessly connected to a computer, allowing you to connect an external control pedal via the MIDI OUT/EXP port. Before connecting to the computer, you need to disconnect from the app first.
Connecting as a Wired MIDI Controller (USB/TRS MIDI)
The Pocket Control can be connected to devices using a USB cable or a TRS MIDI cable:
- TRS MIDI Cable: Connect to devices that support TRS MIDI input. Ensure compatibility (refer to MIDI OUT/EXP port details).
- TRS to 5-pin MIDI Converter Cable: Use if your device supports 5-pin MIDI input only. Confirm converter cable compatibility.
- MIDI Hub: For controlling multiple devices (e.g., a complex pedalboard), a MIDI hub that supports transferring TRS MIDI inputs may be needed. Connect the Pocket Control and other devices to the MIDI hub and configure as needed.
- USB HOST Functionality: When the USB HOST function is enabled, the Pocket Control can act as a host to connect to and control devices via USB. It can also supply power and charge the controlled device through the USB port.
- An external control pedal can only be connected via the MIDI OUT/EXP port when connected to a computer or when using the USB HOST functionality.
Operation
Edit Page
The device offers two editing interfaces: Preset Mode and Custom Mode. Preset Mode uses pre-configured parameters for direct use, while Custom Mode allows users to freely define parameters for different devices.
Preset Mode and Settings
In Preset Mode, you can:
- View the Preset Number and Name.
- Switch between presets.
- Utilize FS A/B/C/D functions (e.g., Patch-, Patch+, Tuner On/Off, Drum On/Off).
- Set the MIDI OUT/EXP Function to connect an expression pedal or send MIDI messages. The description of this function varies depending on the current mode.
Custom Mode and Settings
In Custom Mode, you can:
- Rename and save presets.
- Choose a footswitch mode (Single, Toggle, Momentary, Hold).
- Edit FS A/B/C/D and MIDI OUT/EXP functions.
- Add up to 16 MIDI messages per footswitch.
The unit supports 4 MIDI message types: PC (Program Change), CC (Control Change), Note On, and Note Off. Remember to save your changes by tapping the "Save" button in the app.
Connect to the Control Target (Using Server Mode)
Once your settings are configured, you can connect to your target device wirelessly:
- In the app's Edit Page, tap the "Search" button.
- The unit will automatically scan for nearby devices.
- When your target device appears in the list, select it and tap "Connect To The Control Target".
- To disconnect, tap "Disconnect" on the target device page.
EXP Pedal Calibration
Calibration is essential if your expression pedal is not working correctly or has an inconsistent sweep when sending MIDI messages.
- Hold footswitch D while powering on to enter expression pedal calibration mode. The indicators will blink alternately with "EP" shown on the screen.
- Connect your expression pedal and move it from toe to heel repeatedly at least four times.
- Press footswitch D again to save the calibration and boot normally.
Maintenance
Cleaning
Clean the unit only with a dry cloth.
Troubleshooting
Malfunction
If the unit malfunctions, immediately disconnect the DC adapter and turn the power OFF. Disconnect all other connected cables. Prepare information including the model name, serial number, specific symptoms, and contact SONICAKE support at support@sonicake.com.
Firmware Update
To update the firmware:
- In the app, click the "About device" button to enter the firmware information menu.
- Click "Search for firmware online" to find available firmware.
- Tap on a firmware file to view details, then click "Update Now" to begin the update.
WARNING: Do not turn power off or disconnect during the update process to avoid device malfunction. Keep the Pocket Control and your smart device within 1 meter during the update to prevent signal interference.
Factory Reset
In the app's Settings page, tap "Factory Reset" to perform a factory reset. This will clear all user data.
Specifications
| Feature | Specification |
|---|---|
| Power | Built-in rechargeable battery, USB charged |
| Max. Pot Resistance of EXP Pedal | 25KΩ |
| Battery Life | Up to 12 hours |
| Operating Range | Max 7.5m |
| Dimensions (W x D x H) | 225.6mm x 40.1mm x 29.8mm |
| Weight | 168g |
| Hardware Interface | MIDI |
| Audio Output Effects | Multi-effects |
| Control Type | Button |
| FCC ID | 2A7J4-QCT4 |
The Pocket Control features a built-in rechargeable battery providing up to 12 hours of continuous use.
Multiple operating modes support USB, Bluetooth, and TRS connectivity.
Each footswitch can send up to 16 MIDI messages, or 32 with Bank A/B.
The companion SONICLINK app allows for fully customizable MIDI settings.
User Tips
- The Pocket Control is compact; ensure precise foot placement when pressing individual footswitches, especially if paired with other small devices like the Pocket Master.
- Despite its small size, the unit offers excellent quality and broad compatibility with various plugins and pedalboards.
- Consider pairing it with other SONICAKE Pocket series devices for a highly portable and affordable setup.
Warranty and Support
For any malfunction or support inquiries, please contact SONICAKE support at support@sonicake.com. When contacting support, please provide the model name (QCT-4), serial number, and specific symptoms of the issue.
Opening the chassis for any reason will void the manufacturer's warranty.
For the most comprehensive and up-to-date information, please refer to the full user manual PDF available at SONICAKE Pocket Control User Manual (PDF).