1. Introduction
Thank you for choosing the Philips SFL 1151 Flashlight. This multifunctional flashlight is designed for various scenarios, offering powerful long-range illumination, a soft COB side light, and a telescopic zoom feature. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.

2. Package Contents
Upon unpacking, please ensure all items are present:
- Philips SFL 1151 Flashlight
- USB Type-C Charging Cable
- Lanyard
- Certificate of Conformity
- Instruction Manual (this document)

3. Safety Information
Warning: Avoid direct eye contact with the beam.
- Use only the included USB Type-C charging cable and a compatible power adapter (5V==1A recommended).
- Charge the flashlight at least once every three months to maintain battery health.
- The light source in this product is non-replaceable. When the light source reaches its end-of-life, the entire product should be replaced.
- Keep out of reach of children.

4. Setup and Charging
4.1 Initial Charge
Before first use, it is recommended to fully charge your Philips SFL 1151 Flashlight. Connect the provided USB Type-C cable to the flashlight's charging port and to a compatible USB power adapter. The charging time is approximately 3 hours (with a 5V==1A adapter).

4.2 Attaching the Lanyard
For convenient carrying and to prevent accidental drops, attach the included lanyard to the designated loop on the flashlight body.

5. Operating Instructions
The Philips SFL 1151 Flashlight features a smart switch button and telescopic zoom for versatile lighting.
5.1 Smart Switch Button Operation
The flashlight is controlled by a single button located on the side.
- **Normal Mode**: Press the button to cycle through the main light modes in the following order: High Beam → Low Beam → Side Light → Off.
- **Special Mode (Strobe & SOS)**: Double-press the button quickly to toggle between Strobe Light and SOS (Morse code for distress) modes.
- **Stepless Dimming**: After turning on the flashlight (in High Beam or Low Beam mode), press and hold the button to linearly adjust the brightness. The light will dim or brighten continuously. Release the button to lock the light at the current brightness level. The flashlight will indicate reaching the dimmest or brightest setting with double flashes before reversing direction.


5.2 Telescopic Zoom
The flashlight features a telescopic head for adjusting the beam focus:
- **High Beam (Spotlight)**: Push the cylinder head forward to achieve a focused, long-distance beam. This is ideal for illuminating objects far away.
- **Near Light (Floodlight)**: Pull the cylinder head back to expand the beam, providing a larger floodlight coverage area. This is suitable for close-range illumination.


5.3 COB Side Light
The integrated COB side light provides soft, wide-angle illumination, perfect for tasks requiring ambient light such as reading, camping, or as a work light.

5.4 Battery Indicator
The button features an LED indicator to show the battery level:
- **Green Light**: Battery level is above 15%.
- **Red Light**: Battery level is 15% or below, indicating it's time to recharge.

6. Maintenance
- **Charging**: To prolong battery life, charge the flashlight at least once every three months, even if not in use.
- **Cleaning**: Wipe the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- **Storage**: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures.
- **Light Source**: The LED light source is designed for the product's lifetime and is not user-replaceable. If the light source fails, the entire product must be replaced.
7. Troubleshooting
- **Flashlight not turning on**: Ensure the battery is charged. Connect to the charger and check the battery indicator.
- **Light is dim**: The battery level might be low. Recharge the flashlight.
- **Cannot change modes**: Ensure the button is pressed firmly. If the issue persists after charging, contact support.
- **Telescopic zoom is stiff**: Gently clean the telescopic mechanism. Avoid forcing it.
8. Specifications
| Feature | Specification |
|---|---|
| Model | SFL 1151 |
| Brand Name | Philips |
| Item Type | Flashlight |
| Wattage | 5W |
| Lumen | 2000 |
| Lighting Distance | 100-200 m |
| Body Material | ABS |
| Waterproof | Yes |
| Battery Type | 18650 Lithium Battery |
| Battery Capacity | 2000mAh |
| Battery Included | Yes |
| Lighting Time (Low Brightness) | Approx. 8.5 hours |
| Charging Mode | USB Type-C |
| Charging Time | About 3 hours (5V==1A) |
| Product Size (L x W x H) | 1.19 x 1.19 x 5.44 inches (approx. 13.82cm x 3.02cm) |
| Net Weight | 96g |
| Drop Height Resistance | 1 meter |
| Certification | EMC, ROHS |


9. User Tips
- **Versatile Lighting**: Utilize the telescopic zoom for both wide-area floodlighting (pull back) and focused long-distance spotlighting (push forward) depending on your needs.
- **Emergency Use**: Keep the flashlight charged for emergencies. The Strobe and SOS modes can be crucial in distress situations.
- **Hands-Free Lighting**: The COB side light is excellent for hands-free illumination when placed on a flat surface or hung using the lanyard, making it ideal for camping, reading, or working on tasks.
- **Battery Monitoring**: Pay attention to the battery indicator light (green for sufficient, red for low) to avoid unexpected power loss.

10. Warranty and Support
For detailed warranty information and customer support, please refer to the official Philips documentation included with your product or visit the Philips support website. A digital version of the user manual is also available for reference: User Manual (PDF).