I. Warning & Safety Information
- WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- Do not operate in rainy weather or on slippery surfaces.
- Avoid overloading; ensure the load remains within the safe operating range.
- Before use, inspect all accessories to confirm they are securely installed.
II. Product Overview
Product Name
Electric Scooter Accessories (Receiver)
Brand Information
- Brand: Flipsky
- Model: FT85BD (Specific model code, refer to product title for series)
- Compatible Models: Full range of electric scooters (Vx1, Vx1Pro, Vx3, Vx3Pro, Vx4Pro Receivers)
III. Setup
- Turn off the power to your electric scooter before beginning any installation.
- Install the receiver and other accessories strictly according to the illustrations and diagrams provided in this manual or the official PDF guide.
- Ensure all connections are secure and latches are fully engaged.
IV. Operating Instructions
- After successful installation, power on your electric scooter and the remote control.
- Test all functions of the receiver and connected components to verify normal operation and responsiveness.
- Refer to your specific remote control's manual for pairing procedures if necessary.
V. Maintenance
- Do not disassemble accessories arbitrarily. Unauthorized disassembly may void warranty and cause damage.
- Store the receiver away from high temperatures, direct sunlight, and humid environments to prevent damage to electronic components.
- When not in use for extended periods, disconnect power to the receiver and store it properly in a dry, safe place.
VI. Troubleshooting
- Instability after installation: Verify that all latches and connectors are fully engaged and seated correctly.
- Abnormal functionality: Reconnect all cables by unplugging and reinserting them firmly. Check for any loose or damaged wires.
- Inability to secure firmly: Adjust screws to the appropriate tightness. Do not overtighten to avoid damaging the board or mounting points.
VII. Specifications
| Feature | Detail |
|---|---|
| Brand Name | FLIPSKY |
| Model (Series) | Vx1/Vx1Pro/Vx3/Vx3Pro/Vx4Pro Receiver |
| Specific Model Code | FT85BD |
| Compatible Models | Full range of electric scooters |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Length | 15 cm |
| Package Width | 10 cm |
| Package Height | 10 cm |
| Package Weight | 0.1 kg |
VIII. User Tips
- Firmware Compatibility: When selecting a receiver, ensure its firmware version (e.g., VX3 V1.9) is compatible with your existing remote control and Electronic Speed Controller (ESC) to guarantee proper functionality. Always check the product description or consult the seller if unsure.
IX. Warranty and Support
For specific warranty details, return policies, or further technical support, please contact the seller directly or refer to the official product documentation.
An official user manual in PDF format is available for more detailed instructions and diagrams: