HIRISI S3

Contents

Hirisi S3 Carp Fishing Alarm Set Instruction Manual

Model: S3-3 (Set 1+3) / S3-4 (Set 1+4)

1. Introduction

The Hirisi S3 Carp Fishing Alarm Set is designed to enhance your fishing experience by providing reliable bite indication and remote monitoring. This set features a waterproof design, adjustable settings for volume, tone, and sensitivity, and practical functions like an anti-theft warning and nightlight. The remote receiver ensures you are alerted to activity even when away from your rods. This manual provides detailed instructions for setting up, operating, and maintaining your fishing alarm set.

Hirisi S3 Carp Fishing Alarm Set with receiver and four alarms

Figure 1: Hirisi S3 Carp Fishing Alarm Set Overview

2. Package Contents

Please check the package to ensure all components are present:

  • Fishing Bite Alarms (3 or 4 units, depending on set model)
  • Remote Receiver (1 unit)
  • Zipped PU Protective Case (1 unit)
  • User Manual (this document)

Note: Batteries are not included. The bite alarms require 9V batteries, and the remote receiver requires 3 AAA batteries.

The complete fishing alarm set neatly packed in its protective zipped PU case.

Figure 2: Contents in Protective Case

3. Setup Instructions

3.1 Battery Installation

  1. For Bite Alarms: Open the battery compartment on the back of each alarm unit. Insert one 9V battery, ensuring correct polarity. Close the compartment securely.
  2. For Remote Receiver: Open the battery compartment on the back of the receiver unit. Insert three AAA batteries, ensuring correct polarity. Close the compartment securely.

3.2 Mounting the Alarms

Screw each bite alarm onto your fishing rod pod or bank stick. Ensure it is securely fastened and positioned to allow the fishing line to pass freely through the roller.

Two fishing rods with alarms mounted, showing the setup in a natural environment.

Figure 3: Alarms Mounted on Rods

3.3 Pairing Alarms with Receiver

To connect the alarms to the receiver:

  1. Turn on both the receiver and the bite alarm you wish to pair.
  2. On the receiver, press and hold the 'M' (Mode) button until the LED indicators start flashing.
  3. Activate the bite alarm by passing a fishing line through its roller or by pressing its test button. The receiver will register the alarm and its corresponding LED will light up.
  4. Repeat for all other bite alarms. The system supports flexible re-linking and remembers previous pairings.

Video 1: Demonstration of connecting alarms to the receiver and adjusting settings.

4. Operating Instructions

4.1 Power On/Off

To power on or off the alarms and receiver, use the designated power switch on each unit.

4.2 Adjusting Settings (Volume, Tone, Sensitivity)

Both the bite alarms and the receiver offer adjustable settings:

  • Volume (V): Use the '+' and '-' buttons on the side of the receiver to adjust the volume level.
  • Tone (T): Use the 'T' button on the receiver to cycle through different tone settings.
  • Sensitivity (S): Use the 'S' button on the receiver to adjust the sensitivity of the bite alarms. Higher sensitivity will detect smaller movements of the line.
Close-up of the receiver unit's controls, including volume, tone, and sensitivity settings.

Figure 4: Receiver Controls

4.3 LED Indicators

The bite alarms feature red and green LED lights:

  • Red LED: Indicates a line drop (fish pulling line away).
  • Green LED: Indicates a line return (fish moving towards the rod).

The receiver also has corresponding LEDs that light up for 20 seconds to indicate which alarm has been triggered, providing a signal memory function.

Close-up of four alarms showing different LED colors (red, yellow, blue, green).

Figure 5: Alarm LED Indicators

4.4 Anti-Theft Warning

The alarms are equipped with an anti-theft function. If a fishing rod is picked up from the alarm, it will trigger an alert on both the alarm and the receiver.

4.5 Nightlight Function

The alarms include a switchable nightlight feature, ideal for visibility during night fishing sessions.

4.6 Extra Jack for Illuminated Swingers

Each bite alarm has an extra jack port, allowing you to connect illuminated swingers for additional visual indication.

Detailed view of the alarm unit, showing the screw thread, speaker, and control buttons.

Figure 6: Alarm Unit Details (showing jack port)

5. Maintenance

To ensure the longevity and optimal performance of your Hirisi S3 Carp Fishing Alarm Set, follow these maintenance guidelines:

  • Cleaning: Wipe down the alarm and receiver units with a soft, damp cloth after each use, especially after exposure to water or dirt. Do not use harsh chemicals or abrasive cleaners.
  • Waterproof Design: While the units are rainproof, avoid submerging them in water. Ensure battery compartments are securely closed to maintain water resistance.
  • Battery Care: Remove batteries if the units will not be used for an extended period to prevent leakage and damage. Replace batteries promptly when they run low to ensure reliable operation.
  • Storage: Store the set in its provided zipped PU protective case when not in use. This protects the units from impact, dust, and moisture, ensuring they remain in good condition for your next fishing trip.

6. Troubleshooting

  • No Power: Check if batteries are correctly installed and fully charged. Replace with new batteries if necessary.
  • No Signal/Pairing Issues: Ensure both the alarm and receiver are powered on. Re-attempt the pairing process as described in Section 3.3. Ensure units are within the 150m operating range.
  • Alarm Not Sounding/LEDs Not Working: Check battery levels. Verify that volume settings are not set to minimum or mute. If an alarm is triggered but no sound/light, it may indicate a fault; contact customer support.
  • Interference: In areas with high electromagnetic interference, the wireless range might be reduced. Try moving to a different location.

7. Specifications

FeatureSpecification
ModelS3-3 (Set 1+3), S3-4 (Set 1+4)
MaterialABS
TypeFish Bell/Alarm
Water ResistanceRainproof
Wireless Range150m+
Alarm Battery9V (not included)
Receiver Battery3 x AAA (not included)
Package Dimensions (L x W x H)37 cm x 26 cm x 8 cm
Package Weight0.77 kg

8. User Tips

  • Battery Life: To maximize battery life, turn off both alarms and receiver when not in use. Consider carrying spare batteries, especially for longer fishing trips.
  • Signal Range: While the system boasts a 150m+ range, environmental factors like dense vegetation or terrain can affect signal strength. Test the range in your fishing spot before active use.
  • Individual Alarms: The Hirisi S3 set is typically sold as a complete package (1 receiver + 3 or 4 alarms). If you require a single replacement alarm or wish to expand your set beyond the original configuration, please contact the seller directly to inquire about individual component availability.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the Hirisi HK Store directly through the platform where you made your purchase. Provide your order details and a clear description of the issue to facilitate a quick resolution.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.