MEKEDE LA10

Contents

MEKEDE AI Box User Manual

Model: LA10 Series (LA10, LA10+TV BOX)

1. Introduction

The MEKEDE AI Box is a sophisticated car multimedia interface designed to upgrade your Mercedes Benz NTG3.0 or NTG3.5 system. It provides seamless integration of modern features such as Wireless CarPlay, Android Auto, Mirror Link, Voice Control, and HDMI input, enhancing your driving experience with advanced connectivity and entertainment options. This manual provides essential information for safe operation, installation, and troubleshooting.

MEKEDE LA10 AI Box for Mercedes Benz S-Class NTG3.0/NTG3.5, showing features like HDMI IN, AHD 1080P, HiFi 4, DSP, Mirror Link, BT 5.0, MIC.
MEKEDE LA10 AI Box for Mercedes Benz S-Class NTG3.0/NTG3.5. Features include HDMI IN, AHD 1080P, HiFi 4, DSP, Mirror Link, BT 5.0, MIC.
MEKEDE LA10+TV BOX for Mercedes Benz S-Class NTG3.0/NTG3.5, highlighting support for YouTube and Netflix via an external TV Box.
MEKEDE LA10+TV BOX for Mercedes Benz S-Class NTG3.0/NTG3.5. This variant supports YouTube and Netflix via an external TV Box.

2. Safety Information and Warm Tips

Please read all instructions carefully before installation and operation. Improper use can lead to damage to the device, vehicle, or personal injury.

  • Traffic Safety First: Do not watch videos or operate the machine while driving. Adjust the volume to a level that allows you to hear outside sounds clearly.
  • Safe Operation: If you encounter difficulties operating the system, park your car in a safe place before proceeding.
  • Child Safety: Do not allow children to operate the machine to avoid personal injury and machine damage.
  • Navigation Use: Always follow traffic rules when using the satellite navigation function.
  • Environmental Restrictions: Do not use electronic equipment or open fire in prohibited places (e.g., gas stations, wineries, strong electromagnetic interference areas) as it may cause danger.
  • Professional Installation: Do not attempt to maintain, repair, or install the machine yourself. Installation or repair by untrained or inexperienced persons is very dangerous. It is recommended that the machine be installed by a car audio professional.
  • Power Off Before Installation: To prevent short circuits, always turn off the car and disconnect the connection between ACC and B+ before installation.
  • Avoid Direct Sunlight/Heat: Do not install the machine or store it in direct sunlight. If the LCD screen is near air conditioning vents, ensure cool and hot air does not blow directly onto the machine, as this may damage it.
  • Screen Care: Do not scratch the display screen with sharp objects or press it vigorously with hard objects, as this will cause damage to the screen.
  • Power System: This machine is suitable for car 12V power systems (must have a grounding wire). Do not install this equipment on 24V vehicles, as it will damage the machine.

Note: Due to continuous improvement of product functions, this manual is for reference only.

3. Product Overview and Features

The MEKEDE AI Box offers a range of features to enhance your in-car experience:

  • Wireless/Wired CarPlay: Connect your iPhone wirelessly via Bluetooth or wired via USB to access apps like maps, music, and make calls directly from your car's screen.
  • Wireless/Wired Android Auto: Connect your Android phone wirelessly or wired for real-time alerts on navigation apps, messaging, and music playback.
  • Phone Mirror Link: Mirror your iOS or Android phone screen to the car display for navigation, videos, or other apps.
  • Voice Control: Use voice assistants (e.g., Siri) to control navigation, music, and phone calls.
  • HDMI IN: Supports HDMI input for synchronously playing pictures/videos on the car screen and optional rear screens.
  • AHD Reversing Video: Provides clearer rear-view video quality compared to ordinary cameras.
  • GPS Navigation: Built-in global positioning system with omni-directional map display, real-time traffic conditions, and accurate positioning. Supports various map applications.
  • Dual System Switch: Seamlessly switch between the original car system and the CarPlay/Android Auto system.
  • Third-Party Video Software Support (LA10+TV BOX only): Watch videos from apps like YouTube, Netflix, Twitch, Bilibili, TikTok, and Facebook for an enhanced entertainment experience.
Car screen showing Apple CarPlay interface with phone, messages, music, and map apps. A hand holds an iPhone displaying the CarPlay logo.
Wireless/Wired CarPlay support, displaying iPhone apps on the car screen.
Car screen showing Android Auto interface with maps, music, and phone apps. A hand holds an Android phone displaying the Android Auto logo.
Wireless/Wired Android Auto support, displaying Android apps on the car screen.
Car screen mirroring a phone display showing a scenic landscape. Below, two phones show the same landscape, labeled 'For iPhone' and 'For Android'.
Phone Mirror Link allows mirroring iOS and Android phone screens.
Car interior showing a video playing on the main display and two rear-seat displays, illustrating HDMI IN functionality.
HDMI IN supports synchronous video playback on multiple screens.
Car steering wheel with a voice assistant icon and examples of voice commands like 'Turn on the radio', 'Go Home', 'Play Music', 'Go to a nearby gas station'.
Voice Control for navigation, calls, and music.
Car interior showing a clear AHD reversing camera view with parking guidelines.
AHD Reversing Video provides a clear rear-view.
Car screen displaying a map with various navigation app logos like iGO, Sygic, Yandex, Google Maps, Waze, Goode Map.
GPS Navigation with support for multiple map applications.
Car interior showing the original car system and the CarPlay system on the display, illustrating the dual system switch feature.
Dual System Switch allows seamless transition between original and new interfaces.
Car screen showing YouTube interface, with logos of Netflix, Google Play, Facebook, TikTok, Bilibili, Twitch below, indicating support for third-party video software.
Support for third-party video software (requires LA10+TV BOX).

4. Compatibility

The MEKEDE AI Box is specifically designed for Mercedes Benz S-Class and CL models with NTG3.0 or NTG3.5 systems. Please verify your car's system before purchase.

Table showing compatible Mercedes Benz models: NTG 3.0 (Square LVDS) for W221 S CL 2006-2009 (8inch screen) and NTG 3.5 (Square LVDS) for W211 CL 2010-2012 (8inch screen).
Compatible Mercedes Benz Models and Systems.

How to Identify Your NTG System:

It is crucial to identify whether your Mercedes Benz has an NTG 3.0 or NTG 3.5 system. You can typically distinguish them by the media slot type:

Diagram showing how to identify Benz NTG 3.0 System (PCMCIA Type) and Benz NTG 3.5 System (SD Card Type) by their respective media slots.
Identify your Mercedes Benz NTG 3.0 (PCMCIA Type) or NTG 3.5 (SD Card Type) system.

5. Package Contents

The package contents vary slightly depending on your car's NTG system and whether you choose the TV BOX option. Below are typical accessories included:

Accessories for LA10 (NTG 3.0) including Carplay BOX, Power Cable, LVDS Cable, RCA Cable, MIC, WIFI Antenna, and optional TV BOX.
LA10 Accessories for NTG 3.0 System.
Accessories for LA10 (NTG 3.5) including Carplay BOX, Power Cable, LVDS Cable, RCA Cable, MIC, WIFI Antenna, and optional TV BOX.
LA10 Accessories for NTG 3.5 System.

Standard Components:

  • CarPlay Box (Main Unit)
  • Power Cable
  • LVDS Cable
  • RCA Cable
  • Microphone (MIC)
  • WIFI Antenna

Optional Component:

  • TV BOX (Only included with LA10+TV BOX models)

6. Installation

Installation of the MEKEDE AI Box requires technical expertise. It is highly recommended to have the unit installed by a qualified car audio professional to ensure proper functionality and avoid damage to your vehicle or the device.

General Installation Steps:

  1. Preparation: Ensure the vehicle is turned off and the battery is disconnected (ACC and B+ connections) to prevent short circuits.
  2. Disassembly: Carefully remove the necessary trim panels and the original head unit/display to access the wiring.
  3. Wiring Connections: Connect the provided cables (power, LVDS, RCA, etc.) to the corresponding ports on the AI Box and the vehicle's wiring harness. Ensure all connections are secure.
  4. Component Placement: Securely mount the AI Box in a suitable location within the dashboard, ensuring it does not interfere with other vehicle components or airflow.
  5. Testing: Before reassembling, reconnect the battery and test the functionality of the AI Box, including CarPlay, Android Auto, video input, and system switching.
  6. Reassembly: Once all functions are verified, carefully reassemble the vehicle's dashboard and trim panels.

Installation Video Reference:

For a visual guide on the installation process and system demonstration, please refer to the official video:

Demonstration of the MEKEDE AI Box installation and interface functionality in a car.

Important Note on Wiring Diagrams: While the provided PDF manual (T113) contains general wiring principles, its detailed diagrams are primarily for BMW systems (EVO, NBT, CIC, CCC, NTG 5.0, NTG 4.5, NTG 4.0, A4/Q5). For specific wiring instructions tailored to your Mercedes Benz NTG3.0 or NTG3.5 system, please consult the product-specific documentation or seek assistance from a professional installer.

7. Operating Instructions

7.1. Main Menu Navigation

When the machine is turned on, the original car interface will be displayed. Long press the original car MENU key to switch to the navigation interface. From the main menu, touch the home icon to return to the main interface, and touch the back icon to return to the upper menu.

7.2. System Settings

Click "Settings" on the main menu interface to access system settings, including language, audio, system information, and navigation settings.

7.3. Bluetooth Function

Click "Bluetooth" on the main interface to enter the Bluetooth application. Pair your mobile phone via Bluetooth. Once paired, all icons in the interface will light up, and a Bluetooth icon will appear at the top of the interface.

7.4. Video Playback (Film)

Click "Movie" on the main interface to enter the video playing interface. This supports audio and video files from the system, external SD card, or USB in formats like AVI, MP4, RMVB. Double-click the screen for full-screen mode; touch any area in full-screen mode to return to the operation interface.

7.5. Music Playback

Click "Music" on the home screen to play audio and video files. USB-stored files in MP3, WAV, and MID formats are supported.

7.6. Instrument Display

Click the instrument icon on the main interface to view vehicle-related information.

7.7. Airplay & Miracast

These functions allow screen mirroring from your mobile device. Follow the on-screen instructions for connection. For Miracast, enable screen mirroring/wireless display on your Android phone and connect to the device.

7.8. CarPlay & Android Auto

Click the respective icons on the main interface to enter the CarPlay or Android Auto application. Connect your compatible smartphone wirelessly or via USB to use these features. The car's controls can be used to operate the phone interface.

8. Specifications

Below are the technical specifications for the MEKEDE AI Box:

ParameterSpecification
Working VoltageDC 12V
Operating Voltage Range9V ~ 16V
Maximum Working Current3A
Video StandardNTSC, PAL (automatic recognition)
Video Input1VP-P (75 ohm)
Screen Size8.8" / 10.25" / 12.3"
Resolution1280*480P / 1920*720 / 2400*900
Operating Temperature-20°C ~ +70°C
Storage Temperature-30°C ~ +85°C
Working Humidity45% - 80%
Storage Humidity30% - 90%

Car Multimedia Player Parameter Comparison:

Table comparing features of LA9, LA10, and LA10+TV BOX models, including OS (Linux), HDMI IN, WIFI, Carplay+Auto, YouTube support, Mirror Link, DSP, AHD, BT module, USB, 360° Panoramic, and Reverse rearview.
Comparison of LA9, LA10, and LA10+TV BOX features.

9. Troubleshooting

Here are some common issues and their solutions:

  1. Problem: No response to key operation (protocol failure), abnormal display, or flower screen.
    Reason: Model setting is not correct.
    Solution: Enter the factory Settings to set the correct model.
  2. Problem: No Bluetooth function.
    Reason: There is no Bluetooth pairing and connection with the mobile phone.
    Solution: Enter the Bluetooth Settings and check the machine name and password.
  3. Problem: No video display on the dashcam.
    Reason: The type of dashcam is not chosen correctly.
    Solution: In System Settings > Factory Settings > ARM related Settings > Dashcam Settings, select the correct dashcam type.
  4. Problem: No display when reversing.
    Reason: Wrong choice of reversing camera.
    Solution: Enter the Settings inside the reversing Settings, choose the original car camera or rear-mounted camera.

10. Warranty and Support

For warranty information, technical support, or further assistance, please contact your seller or the MEKEDE customer service team. Ensure you have your product model and purchase details ready for efficient support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.