1. Product Introduction
The PowMr POW-HVM6.5KP is an integrated solar photovoltaic + energy storage power supply system. It efficiently converts solar energy into electricity and stores it for daily use. This system supports self-consumption, peak-load shifting, and provides emergency power supply, making it ideal for households, shops, factories, and remote areas.
Main Functions:
- Solar power generation
- Lithium battery energy storage
- On-grid / Off-grid / Hybrid working modes
- Comprehensive protection: Overcharge, over-discharge, overload, short-circuit, and lightning protection
- LCD display & mobile APP remote monitoring
Video: Overview of the PowMr POW-HVM6.2KP (similar to 6.5KP) all-in-one solar inverter, highlighting its design for household solar energy needs, support for solar and bypass power, grid charging, battery backup, adjustable AC output (220V/230V/240V) with 6200W rated output (boosting to 6500W), dual output ports, compatibility with 48V lead-acid or lithium batteries, 120A charging current, 8500W PV input, and parallel capability for up to 9 units (55.8kW total output).
2. System Components
The PowMr Hybrid Solar Inverter system typically includes the following components:
- Solar Panel: Monocrystalline / Polycrystalline PV module for solar energy capture.
- Hybrid Inverter: The core unit, controlling charging/discharging and overall system operation.
- Energy Storage Battery: Lithium iron phosphate battery, known for its safety and long life.
- Mounting Bracket: Used for secure installation of solar panels.
- Cables & Connectors: Includes DC/AC cables, circuit breakers, and a grounding kit for safe and efficient electrical connections.
- Monitoring System: Features an LCD screen on the inverter and a mobile APP for remote control, data record, and fault alarms.
3. Working Modes
The inverter supports various working modes to optimize energy usage:
① On-grid Mode (With Grid Power)
- Daytime: PV power first supplies loads, then excess power charges the battery. Once the battery is full, any remaining excess power feeds back to the grid.
- Night / Rainy days: The battery discharges to supply power, with the grid supplementing if needed.
- Features: Helps save electricity bills, provides stable power, and offers high efficiency.
② Off-grid Mode (No Grid / Power Outage)
- Works independently without grid power.
- Daytime: PV generates power for loads and charges the battery.
- Night: The battery supplies power to your home/equipment.
- Features: Ensures continuous operation during power outages, providing full emergency backup.
③ Hybrid Mode (Recommended)
- Normal: Operates on-grid to maximize cost savings.
- Grid failure: Automatically switches to off-grid mode in milliseconds.
- Benefit: Your home power supply is never interrupted.
4. Installation & Wiring
Installation Environment
- Solar panel: Should be south-facing (in the Northern Hemisphere), free from shadows, and well-ventilated.
- Inverter & battery: Install indoors or in a rainproof area. Avoid high temperatures and humidity.
- Grounding: The system MUST be properly grounded for lightning and leakage protection.
Wiring Order (Strictly Follow)
- Connect the Solar panel → DC breaker → Inverter.
- Connect the Battery → Inverter.
- Connect the Load / Grid → Inverter AC terminal.
- After all connections are secure, power on the system.

Image: Multiple Communication Interfaces for Enhanced System Integration. This diagram illustrates the various ports on the inverter, including RS232 for communication with host computers, BMS/RS485 for lithium battery system management, parallel connection ports, AC input/output, PV input, and DC input terminals.

Image: 360° Protection. This graphic details the comprehensive safety features of the inverter, including safeguards against short circuits, over-load, over current, backfill, over voltage, over-temperature, under voltage, and over charge.
5. Operation Instructions
Start Up Procedure
- Turn on the battery switch. The inverter will enter standby mode.
- Turn on the PV DC switch. The system will begin to start.
- Turn on the AC load/grid switch.
- Check the LCD display or mobile APP to ensure voltage, power, and State of Charge (SOC) are normal.
Shut Down Procedure
- Turn off the AC load switch.
- Turn off the PV DC switch.
- Turn off the battery main switch.
- Confirm the system is completely powered off.
6. Safety Warnings
- Installation and maintenance must ONLY be performed by a qualified electrician.
- Do NOT install the system during rain or thunderstorms.
- Do NOT disassemble, squeeze, or short-circuit the battery.
- Do NOT step on, scratch, or block PV panels.
- Keep the system away from children, water, fire, and excessive heat.
- Stop using the system immediately if any fault or abnormal smell occurs.
7. Troubleshooting
Refer to the table below for common fault symptoms, possible causes, and solutions:
| Fault Symptom | Possible Cause | Solution |
|---|---|---|
| No output power | Loose connection / Low battery | Check wiring / Turn on switches / Recharge battery |
| PV not charging | Shadow / Wrong wiring | Clean shadow / Recheck PV cables |
| Battery cannot charge | Battery protection / Temperature fault | Restart system / Check environment |
| Cannot drive load | Overload / Too many devices | Reduce high-power equipment connected |
| On-grid failure | Grid voltage abnormal / Protection issue | Check grid power / Reset inverter |
8. Maintenance
- Solar panel: Clean dust every 3–6 months to ensure optimal performance.
- Battery: Maintain State of Charge (SOC) between 20%–80%. Recharge monthly if not in use to prolong battery life.
- Inverter: Keep the inverter dry and well-ventilated. Regularly check all cables for secure connections.
- Cables: Periodically inspect cables for signs of aging, damage, or rodent bites.
- Grounding: Check the grounding connection before each thunderstorm season to ensure safety.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | POW-HVM6.5KP |
| Type | DC/AC Inverter (Hybrid Solar Inverter) |
| Input Voltage | 48Vdc |
| Rated Input Voltage | 220/230/240VAC |
| Output Voltage | 230Vac±5% (Adjustable: 220V/230V/240V) |
| Output Frequency | 50Hz/60Hz (Auto sensing), 50Hz/60Hz±0.1% |
| Output Type | Single Phase, Pure Sine Wave |
| Rated Power | 6200W (Boosts to 6500W when solar input exceeds 2000W and battery supports load) |
| Nominal DC Input Voltage | 48Vdc |
| Max. PV Charging Current | 120A |
| Max. AC Charging Current | 100A |
| PV Charging Mode | MPPT (Maximum Power Point Tracking) |
| Parallel Machine Interface | Supports parallel function (up to 9 units for a total output of 55.8kW) |
| Origin | Mainland China, Guangdong, China |
| Package Dimensions (L x W x H) | 40cm x 20cm x 60cm |
| Package Weight | 30.0 kg |
10. Warranty & Support
For any inquiries, technical support, or warranty claims, please contact the manufacturer, Qianrui Solar & Energy Storage, directly:
- Manager: Heaven
- WhatsApp: +86 198 0749 4227
- Email: qianruiheaven@gmail.com
A detailed user manual in PDF format is also available for download from the product page.
11. User Tips
No specific user tips were available from provided reviews or Q&A content. Always refer to the official manual for detailed instructions and safety guidelines.