Loefme HB05/HB07

Contents

LOEFME Pop Up Canopy Tent User Manual

Models: HB05 / HB07

Brand: Loefme

1. Introduction

Thank you for choosing the LOEFME Pop Up Canopy Tent. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your gazebo. Please read these instructions carefully before use and retain them for future reference.

The LOEFME Pop Up Canopy Tent is designed for various outdoor activities, offering quick setup, UV protection, and waterproof capabilities. It is available in 2x2m and 3x3m sizes and includes four detachable sidewalls for versatile use.

2. Safety Warnings

Failure to follow these warnings may result in serious injury or damage to the product.

  • Always have at least two people for assembly to prevent damage to the steel poles and ensure safety.
  • DO NOT ATTEMPT TO ASSEMBLE THE TENT ALONE. This could cause unnecessary stress on the legs and may damage the product if not pulled apart in tandem.
  • Secure the tent in windy conditions by using the ropes and hammering stakes into the ground at a 30-degree angle to balance the sides of the tent.
  • If the canopy is placed on a hard surface, secure the four sides with bricks or sandbags to weigh down the canopy.
  • DO NOT ASSEMBLE TENTS IN RAIN, SEVERE WIND, OR SNOWY WEATHER CONDITIONS. It is the owner's responsibility if the tents are set up and damaged during these conditions.
  • Store your canopy tent in a cool, dry place when not in use.
  • Keep away from open flames and heat sources.
  • Ensure all locking mechanisms are fully engaged during setup and before use.

3. Package Contents

Please check the package to ensure all items are present and undamaged:

  • 1 × Pop-Up Tent Frame
  • 1 × Roof Canopy
  • 4 × Sidewalls (2 Window Panels + 2 Zipper Door Panels)
  • 1 × Installation Accessories Set (includes ropes and stakes)
  • 1 × Storage Bag (for folded frame)

4. Specifications

Feature Detail
Product Name Pop-Up Gazebo Tent
Brand Loefme
Model Number HB05 / HB07
Type Gazebos
Frame Material Iron
Top Rod & Crossbar 10 × 18 mm
Leg Tube Size 25 × 25 mm / 20 × 20 mm
Tube Thickness 0.5 mm
Sail Material (Roof) 210D Silver-Coated Oxford (UV Protection)
Sidewall Material Oxford Fabric
Available Sizes (Approx.) 2 × 2 m (6.56 × 6.56 ft) / 3 × 3 m (9.84 × 9.84 ft)
Height Positions (3x3m model) 74" (188cm), 76" (194cm), 79" (200cm)
Folded Frame Size (Approx.) 119 cm × 19 cm × 22 cm
Assembly Required Yes
UV Protection UV50+
Waterproof Yes
Product size diagram showing 3m x 3m dimensions, 2.5m height, and folded frame size of 119cm x 19cm x 22cm.

Figure 1: Product Dimensions (3x3m model) and Folded Frame Size.

Diagram showing three height positions for the 3x3m gazebo: 74 inches (188cm), 76 inches (194cm), and 79 inches (200cm).

Figure 2: Adjustable Height Positions for 3x3m Gazebo.

Image illustrating UV50+ protection with water droplets on fabric, sun rays being blocked, and a close-up of reinforced seams.

Figure 3: UV50+ Protection and Reinforced Seam Design.

5. Setup Instructions

The LOEFME Pop Up Canopy Tent features a quick pop-up design for easy assembly. Please follow these steps carefully. Remember, assembly requires at least two people.

Detailed diagram showing 6 steps to open the gazebo and 5 steps to close it. Opening steps include taking out, partially unfolding, pulling legs apart, extending, and securing. Closing steps involve releasing locks, collapsing, and folding.

Figure 4: Open and Close Operation Diagram.

5.1 Opening the Gazebo

  1. Take the canopy out of the box and place it on a dry, flat surface (grass, sand, or hard surface).
  2. With at least two people, partially unfold the frame by gently pulling two opposite legs outwards.
  3. Continue pulling the legs apart until the frame is about halfway open.
  4. Place the roof canopy over the partially opened frame. Ensure the canopy is correctly oriented with the frame.
  5. From underneath the canopy, push up the central locking mechanism until it clicks into place, fully extending the roof.
  6. Extend each leg downwards until it locks into your desired height position.
  7. Attach the sidewalls if desired (refer to Section 6.1).
  8. Secure the gazebo using the provided ropes and stakes. For hard surfaces, use sandbags or weights on each leg.

5.2 Closing the Gazebo

  1. Remove all sidewalls and any accessories.
  2. Press the release buttons on each leg to retract them to their lowest position.
  3. From underneath the canopy, press the central release button to collapse the roof frame.
  4. Gently push two opposite legs towards each other to begin folding the frame.
  5. Continue folding until the frame is fully collapsed.
  6. Remove the roof canopy.
  7. Place the folded frame and canopy into the storage bag.

6. Operation

6.1 Attaching Sidewalls

The gazebo includes four sidewalls: two with window panels and two with zipper door panels. These can be attached using the hook-and-loop fasteners located along the top edge of the sidewalls and the gazebo frame. Ensure the zippers are closed before attaching to prevent flapping in the wind.

6.2 Adjusting Height

The gazebo frame features three adjustable height positions. To adjust the height:

  1. Ensure the gazebo is stable and not under excessive load.
  2. Locate the push-pin locking mechanism on each leg.
  3. Simultaneously press the push-pins on all four legs (requires two people).
  4. Carefully raise or lower the frame to the desired height.
  5. Ensure all push-pins fully engage in the corresponding holes for the chosen height.

6.3 Weather Conditions

While the canopy is waterproof and offers UV50+ protection, it is designed for temporary outdoor use. Do not use in severe weather conditions such as heavy rain, strong winds, or snow. Always secure the gazebo properly with stakes and ropes or weights to prevent it from being lifted by wind.

7. Care and Maintenance

7.1 Cleaning

  • Canopy and Sidewalls: Clean with mild soap and water. Do not use harsh detergents or abrasive cleaners, as these can damage the fabric's waterproof and UV-protective coating. Rinse thoroughly and allow to air dry completely before storage.
  • Frame: Wipe the iron frame with a damp cloth. Dry immediately to prevent rust.

7.2 Storage

  • Ensure the canopy, sidewalls, and frame are completely dry before folding and storing. Storing damp components can lead to mold, mildew, and rust.
  • Fold the canopy and sidewalls neatly to prevent creases and damage.
  • Store the gazebo in its original storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.

7.3 Inspection

  • Regularly inspect the frame for any signs of damage, bending, or rust.
  • Check the fabric for tears, holes, or signs of wear. Repair small damages promptly to prevent them from worsening.
  • Ensure all ropes, stakes, and fasteners are in good condition.

8. Troubleshooting

Problem Possible Cause Solution
Difficulty opening/closing the frame Not enough people assisting; frame components are stiff or misaligned. Ensure at least two people are working in tandem. Gently wiggle components to align. Do not force.
Gazebo feels unstable Not properly secured; uneven ground; strong winds. Always use stakes and ropes. For hard surfaces, use sandbags/weights. Ensure setup on level ground. Do not use in strong winds.
Water pooling on canopy Canopy not taut enough; heavy rainfall. Ensure the frame is fully extended and the canopy is stretched tightly. Adjust height if possible to create more slope. Remove excess water carefully.
Sidewalls not fitting correctly Incorrect orientation; frame not fully extended. Check the orientation of each sidewall. Ensure the gazebo frame is fully extended and locked at the desired height.

9. User Tips

  • Enhance Stability: While the gazebo includes basic securing accessories, consider purchasing additional heavy-duty stakes or larger sandbags for increased stability, especially in areas prone to moderate winds.
  • Pre-Assembly Check: Before each use, quickly check all frame connections and fabric for any wear or damage to ensure a smooth setup and safe experience.
  • Sidewall Versatility: Experiment with different sidewall configurations (e.g., two window panels and two open sides, or all four closed) to adapt to varying weather conditions and privacy needs.

10. Warranty and Support

For any questions, concerns, or issues regarding your LOEFME Pop Up Canopy Tent, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Please note that damage resulting from improper assembly, misuse, or failure to adhere to safety warnings (especially regarding severe weather conditions) may void any applicable warranty.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.