Introduction
The Flipsky FSESC 110400 is a high-performance, high-voltage, and high-current Electronic Speed Controller (ESC) designed for demanding applications. Featuring a fully sealed, IP68 waterproof enclosure and an advanced dual-cooling system with an aluminum PCB and integrated water cooling, this ESC ensures maximum heat dissipation and reliability. It is based on VESC technology, offering versatile control modes and comprehensive protection features for various electric vehicles and robotics.
The FSESC 110400, showcasing its robust, waterproof design with water cooling ports.
Specifications
Detailed specifications of the FSESC 110400, including firmware, voltage, and current ratings.
| Attribute | Value |
|---|---|
| Firmware | 6.06 (Support 6.06 or above) |
| Voltage | 14-110V (safe for 4-26S) |
| Continuous Current | 110V/400A (Values depend on mounting, ambient temperature, and air/water circulation) |
| Peak Current | 1000A |
| BEC | 5V@3A |
| Max ERPM | 150000 |
| Motor/Power Wire | 6AWG |
| Phase Filter | Yes |
| Regenerative Capacity | Yes |
| Programming | VESC_TOOL |
| Net Weight | 3.22kg |
| Material | Metal |
| Is Electric | No battery |
| Is Batteries Included | No |
Features
- Fully sealed with IP68 water-proof rating, ensuring protection against dust and water immersion.
- Equipped with a SMT32F405 CPU (Cortex-M4 with DSP function, 168MHz frequency) for powerful processing.
- Supports BLDC and FOC (sinusoidal) motor control modes.
- Compatible with various sensor modes (ABI, HALL, AS5047, AS5048A) and sensorless operation.
- Supports multiple control modes: Current, Duty Cycle, Speed, and PID.
- Adjustable protection features: low/high voltage, over current, and MOSFET/motor over temperature protection.
- Features regenerative braking capability.
- Supports dual communication ports for simultaneous use of Bluetooth and other port controls.
- Designed with an Aluminum PCB and an integrated water-cooled system for superior heat dissipation and extended lifespan.
Package Contents
The FSESC 110400 package includes the following items:
- 1x FSESC 110400 Waterproof Water-Cooled ESC
- 1x 16mm Self-Lock Button (Red Light/110V)
- 1x USB Cable
- 1x Sensor Cable
- 1x USB Type-C (Dual Large Ferrite Ring) Cable
Visual representation of the FSESC 110400 and its included accessories.
Setup
Dimensions
The physical dimensions of the FSESC 110400 with its enclosure are L245.5mm x W144.5mm x H75mm. Ensure adequate space for installation and proper air/water circulation.
Overview of the ESC with key dimensions indicated.
Technical drawing showing detailed measurements and mounting points.
Wiring Diagram
Carefully follow the wiring diagram below for correct connection of the battery, motor, and communication ports. Incorrect wiring can damage the ESC or connected components.
Comprehensive wiring diagram illustrating connections for battery, motor, and various communication interfaces.
- Battery Connections: Connect your battery's positive (B+) and negative (B-) terminals to the corresponding inputs on the ESC.
- Motor Connections: Connect the three motor phase wires (A, B, C) to the corresponding outputs on the ESC.
- Communication Ports: The ESC features multiple communication ports for various peripherals:
- UART2: For serial communication (3.3V, GND, RX2, TX2).
- HALL: For Hall effect sensors (GND, HALL3, HALL2, HALL1, TEMP, 5V).
- PPM: For Pulse Position Modulation input (GND, 5V, SERVO).
- USB: For connection to VESC_TOOL (D-, D+, GND).
- COMM: General communication port (5V, 3.3V, GND, ADC1, RX/SDA, TX/SCL, ADC2).
- CAN: For Controller Area Network communication (CANL, CANH).
- POWER SWITCH: For the included 16mm self-lock button (LED-, LED+, NC, COM).
Operating Instructions
The FSESC 110400 is programmable via VESC_TOOL, allowing for detailed configuration and monitoring. Ensure you use the correct firmware version (6.06 or above) for optimal performance.
- Programming: Connect the ESC to your computer using the provided USB cable and use the VESC_TOOL software for configuration. This tool allows you to set motor parameters, control modes, and protection limits.
- Control Modes: The ESC supports various control modes including BLDC and FOC (Field-Oriented Control) for smooth and efficient motor operation. You can also select control based on Current, Duty Cycle, Speed, or PID.
- Sensor Modes: The ESC supports both sensored (ABI, HALL, AS5047, AS5048A) and sensorless motor operation. Configure the appropriate sensor mode in VESC_TOOL based on your motor type.
- Power On/Off: Use the included 16mm self-lock button to power the ESC on and off. The red light on the button indicates power status.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your FSESC 110400.
- Waterproofing: The ESC features an IP68 waterproof rating. While designed for water resistance, avoid prolonged submersion beyond specified limits and ensure all connections are properly sealed before exposure to water.
- Cooling System: The dual-cooling design with an aluminum PCB and water-cooling system is crucial for heat dissipation. Ensure the water cooling lines are clear and free from obstructions. Regularly check for leaks or blockages in the water circulation system.
- General Care: Keep the ESC clean and free from debris. Avoid exposing it to extreme temperatures or harsh chemicals. Periodically inspect all wiring and connections for signs of wear or damage.
- Firmware Updates: Regularly check for firmware updates via VESC_TOOL to benefit from performance improvements and bug fixes. Follow the update instructions carefully.
The FSESC 110400 showing its water cooling inlets/outlets.
Troubleshooting
The FSESC 110400 includes several protection mechanisms to prevent damage. If you encounter issues, consider the following:
- Protection Triggers: The ESC has adjustable protection against low/high voltage, over current, and MOSFET/motor over temperature. If the ESC shuts down unexpectedly, check for these conditions.
- No Power: Ensure the battery is charged and correctly connected. Check the power switch for proper function.
- Motor Not Responding: Verify motor phase wire connections and sensor connections (if using sensored mode). Check motor parameters in VESC_TOOL.
- Overheating: Ensure the water cooling system is functioning correctly, with no blockages or leaks. Reduce load if operating in high ambient temperatures.
- Communication Issues: Check USB or other communication port connections. Ensure VESC_TOOL is updated and correctly configured.
For complex issues, consult the VESC community forums or contact Flipsky support.
User Tips
- Initial Configuration: Always perform a motor detection and calibrate your input device (PPM, etc.) using VESC_TOOL before first use.
- Monitoring: Utilize the real-time data logging features in VESC_TOOL to monitor ESC performance, temperatures, and current draw during operation. This helps in optimizing settings and identifying potential issues early.
- Water Cooling Setup: For optimal performance, ensure a continuous and adequate flow of cooling water through the ESC. Consider using a dedicated pump and radiator system for demanding applications.
- Secure Mounting: Mount the ESC securely in a location that allows for good airflow (even with water cooling) and protects it from physical impact.
Warranty and Support
Flipsky provides a warranty for its products under specific conditions:
- Warranty Period: For consumable electronic products like the FSESC 110400, the warranty period is 2 months, starting from the 7th day after shipment (as per logistic record).
- Coverage: The warranty covers manufacturing failures. If a manufacturing failure occurs, Flipsky will bear the return shipping cost for repair or replacement. If repair or replacement is not possible, a discount may be offered.
- Exclusions: The warranty does not cover:
- Lack of proof of purchase channel.
- Mechanical damage to electronic components or PCB.
- PCB damage resulting from soldering iron traces (excluding solderable bullet connectors).
- Damage due to external impact.
- Water inflow (for non-waterproof products, not applicable to this IP68 rated ESC unless seals are compromised).
- Abnormal applications beyond the product specifications.
- Wear and tear caused by normal use.
- Third-Party Purchases: For products purchased from channels other than Flipsky, please contact the original purchase channel for support.
- Warranty Validity: The warranty is valid only for the original order and the first transaction. It is not transferable.
Most products are tested before shipment to ensure quality. This warranty policy is valid for products purchased on or after November 1, 2018.
For support inquiries, please contact Flipsky directly via their official channels.