1. Introduction
This manual provides essential information for the setup, operation, and maintenance of your Estardyn TFT LCD Display Module. These modules are available in 2.4, 2.8, and 3.5-inch sizes, utilizing an SPI interface and driven by ST7789V or ST7796S controllers. Please read this manual thoroughly before use to ensure proper functionality and longevity of your display module.

Figure 1: Estardyn TFT LCD Display Modules (2.4, 2.8, 3.5 Inch)
2. Specifications
The Estardyn TFT LCD Display Modules come in various sizes, each with specific resolutions and driver ICs. All modules feature an SPI interface for communication.

Figure 2: Detailed Specifications and Dimensions for all Display Sizes
General Specifications:
- Type: TFT LCD Display
- Interface: SPI (Serial Peripheral Interface)
- Display Mode: 1
- High-concerned chemical: None
Model-Specific Specifications:
| Size | Resolution | Driver IC | Dimensions (approx.) |
|---|---|---|---|
| 2.4 Inch | 240RGBx320 | ST7789V | 42.7 x 60.3 x 3.5 mm |
| 2.8 Inch | 240RGBx320 | ST7789V | 50 x 69.2 x 4.4 mm |
| 3.5 Inch | 320RGBx480 | ST7796S | 55.7 x 84.3 x 4.4 mm |
3. Setup
Follow these steps to connect and prepare your TFT LCD Display Module for use:
3.1 Pinout Diagram
Refer to the image below for the pin assignments on the back of the display modules. Ensure correct connections to your microcontroller (e.g., ESP32).

Figure 3: Display Module Pinout (Back View)
3.2 Connection Guidelines
- Soldering: The display modules typically come with header pins that may require soldering to the PCB for secure connections. Ensure proper soldering techniques are used if necessary.
- Power Supply (VCC, GND): Connect VCC to your microcontroller's 3.3V or 5V power supply (check module's voltage compatibility) and GND to ground.
- SPI Communication Pins:
- SCL (Serial Clock): Connect to your microcontroller's SPI clock pin.
- SDA-O (Serial Data Out / MOSI): Connect to your microcontroller's MOSI (Master Out Slave In) pin.
- CS (Chip Select): Connect to a digital output pin on your microcontroller.
- DC (Data/Command): Connect to a digital output pin on your microcontroller to switch between data and command modes.
- RES (Reset): Connect to a digital output pin on your microcontroller for hardware reset.
- Backlight (BL): Connect to a digital output pin, often with PWM capability for brightness control.
3.3 Example Connection with ESP32
Below is an example of a 2.8-inch display module connected to an ESP32 microcontroller on a breadboard. This illustrates a typical setup for testing and development.

Figure 4: 2.8 Inch Display Connected to ESP32

Figure 5: Display Operating with ESP32, showing matrix code
4. Operating Instructions
Once physically connected, the display module requires software configuration to render graphics. This typically involves using a library compatible with the display's driver IC (ST7789V or ST7796S) and your chosen microcontroller platform.
4.1 ESPhome Configuration Example (for ESP32 with 2.8 Inch ST7789V)
For users integrating with ESPhome, the following configuration parameters have been reported to work effectively with an ESP32 Super Mini and a 2.8-inch ST7789V display:
spi:
clk_pin: GPIO12
mosi_pin: GPIO11
interface: hardware
output:
- platform: ledc
pin: GPIO7
id: gpio_backlight
light:
- platform: monochromatic
output: gpio_backlight
id: back_light
restore_mode: ALWAYS_ON
display:
- platform: mipi_spi
model: ST7789V
cs_pin: GPIO10
dc_pin: GPIO9
reset_pin: GPIO6
dimensions:
width: 320
height: 480
rotation: 90
color_order: bgr
invert_colors: false
transform:
mirror_x: true
mirror_y: false
swap_xy: falseNote: Adjust GPIO pins, resolution, and transformation settings according to your specific display size, driver IC, and desired orientation.
5. Maintenance
To ensure the longevity and optimal performance of your display module, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the display surface with a soft, lint-free cloth. For stubborn smudges, slightly dampen the cloth with distilled water or a specialized screen cleaner. Avoid abrasive materials or harsh chemicals.
- Handling: Always handle the module by its edges to prevent damage to the screen or electronic components. Avoid applying excessive pressure to the display surface.
- Storage: When not in use, store the display module in a dry, dust-free environment, ideally in its original packaging or an anti-static bag.
- Environmental Conditions: Operate and store the display within its specified temperature and humidity ranges to prevent damage.
6. Troubleshooting
If you encounter issues with your display module, consider the following troubleshooting steps:
- No Display/Blank Screen:
- Verify all power (VCC, GND) and SPI connections are secure and correctly wired according to the pinout diagram (Figure 3).
- Check your microcontroller's code for proper initialization of the display driver IC (ST7789V/ST7796S) and SPI interface.
- Ensure the backlight (BL) pin is correctly connected and receiving power or a control signal.
- Incorrect Colors/Garbled Display:
- Confirm that the correct driver IC (ST7789V or ST7796S) is selected in your software library.
- Check the
color_orderandinvert_colorssettings in your display configuration (e.g., ESPhome example in Section 4.1). - Ensure the resolution settings in your code match the actual resolution of your display module.
- Display Not Responding:
- Check the
CS,DC, andRESpin connections. - Ensure your SPI communication speed is compatible with the display module.
- Check the
- Soldering Issues: If you soldered the pins, inspect the solder joints for any cold joints, bridges, or poor connections.
7. User Tips
Based on feedback from other users, here are some helpful tips for using your Estardyn TFT LCD Display Module:
- The display modules work well with ESP32 microcontrollers, particularly the ESP32-S3.
- While the brightness may not be extremely high, it is generally suitable for indoor applications like desktop stations.
- Be aware that the 3.5-inch screen board is quite large, which might influence your project's physical design.
- Many users have found success by carefully soldering the header pins to the display module for reliable connections.
- The modules are typically well-packaged, ensuring safe delivery.
8. Warranty and Support
For any technical assistance or inquiries regarding your Estardyn TFT LCD Display Module, please contact your retailer or the manufacturer's support channels. Keep your purchase receipt as proof of purchase for any warranty claims.