Seauto SAT 40

Contents

Seauto SAT 40 Robotic Pool Vacuum

User Instruction Manual

1. Introduction

The Seauto SAT 40 is an advanced cordless robotic pool cleaner designed to provide efficient and thorough cleaning for various pool types. Featuring AI Sonar Navigation, multiple cleaning modes including waterline cleaning, and a long-lasting battery, it simplifies pool maintenance. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Seauto SAT 40.

Seauto SAT 40 Robotic Pool Vacuum in a clean pool

Figure 1: Seauto SAT 40 Robotic Pool Vacuum in operation.

2. Safety Information

  • Read all instructions carefully before using the appliance.
  • Do not operate the cleaner when people or pets are in the pool.
  • Ensure the charging port is dry before connecting the charger.
  • Use only the original charger provided with the device.
  • Keep the cleaner out of reach of children.
  • Do not attempt to repair the device yourself. Contact customer support for assistance.
  • Store the cleaner in a cool, dry place when not in use.

3. Package Contents

Verify that all items are present in the package:

  1. Seauto SAT 40 Device
  2. Retrieval Hook
  3. User Manual (this document)
  4. Charger
  5. Filters & Foam
Diagram showing the contents of the Seauto SAT 40 package: Device, Hook, User Manual, Charger, Filters & Foam.

Figure 2: Seauto SAT 40 Packing List.

4. Product Overview

The Seauto SAT 40 is engineered for superior pool cleaning with several key features:

  • Waterline Cleaning Mode: Dedicated mode for scrubbing the pool's waterline, ensuring comprehensive cleanliness.
  • AI Sonar Navigation: Intelligent path planning for efficient cleaning of pool walls (N-Path) and floors (CROSS pattern).
  • Long Runtime: Up to 240 minutes of cleaning on a single charge.
  • Cordless Design: Eliminates the hassle of tangled cords and provides unrestricted movement.
  • Powerful Suction: Equipped with 4 brushless motors for high efficiency and low energy consumption, delivering 120 GPM flow rate.
  • Durable Construction: Features double cleaning brushes and an ABS+PC shell for deep cleaning and resistance to cracking.
  • Obstacle Avoidance: Effortlessly moves over common pool obstacles like corners, drains, and uneven surfaces.
Robotic pool cleaner performing waterline cleaning, showing double cleaning power and suction.

Figure 3: Upgrade Waterline Cleaning Mode.

Diagram showing the internal components of the robotic pool cleaner, including 4 brushless motors, double cleaning brushes, and an ABS+PC shell.

Figure 4: Built-in 4 Brushless Motors for High Efficiency.

Image illustrating the cordless design of the pool cleaner and its compatibility with various pool sizes and depths.

Figure 5: Cordless Design and Pool Compatibility.

Diagram showing the smart cleaning path planning with N-Path for walls and CROSS pattern for the floor.

Figure 6: Smart Cleaning for Every Corner.

5. Specifications

Feature Detail
Cleaning Modes All-cover, Wall-only, Floor-only, Waterline-only
Applicable Pool Shapes Suitable for in-ground pools
Max Pool Size Up to 3200 sq ft (300 m²)
Water Depth Supported 1.6-16.4 ft (0.5-5 m)
PH Value Supported 7.0-7.8
Filter Density 3.7L + 180 μm + 90 μm
Debris Type Leaves, Algae, Stones, Pollen, Soil, etc.
Battery Capacity 10400mAh
Battery Lifespan 10000+ hours
Runtime 4 hours (240 minutes)
Removable Battery Yes
Suction Motor Quantity 4
Motor Power 320W
Flow Rate 120 GPM
Additional Features Cordless, Press & Go, Auto-Dock When Low Battery
Infographic showing battery life (240 mins), cleaning area (2100 sq.ft), water depth (1.65-10ft), and 4 cleaning modes (Wall, Floor, Waterline, Auto).

Figure 7: Key Specifications and Cleaning Modes.

6. Setup

6.1 Initial Charging

Before first use, fully charge the Seauto SAT 40. Connect the charger to the device and a power outlet. The indicator light will show the charging status.

Robotic pool cleaner charging with a 'Fast Charging 5 Hours' graphic.

Figure 8: Fast Charging (approximately 5 hours).

6.2 Placement in Pool

Once fully charged, gently place the cleaner into the pool. Ensure it sinks to the bottom before starting operation.

7. Operating Instructions

7.1 Starting Operation

To start cleaning, simply press the Start button on the device. The cleaner will begin its operation based on the selected cleaning mode. You can also set cleaning modes and paths via the Seauto App for optimal performance.

7.2 Cleaning Modes

The Seauto SAT 40 offers versatile cleaning modes to suit your pool's needs:

  • All-cover mode: Comprehensive cleaning of the entire pool.
  • Wall-only: Focuses solely on cleaning the pool walls.
  • Floor-only: Cleans only the pool floor.
  • Waterline-only: Specifically targets and scrubs the pool's waterline.
  • Wall then Floor: Cleans walls first, then proceeds to the floor.
  • Full pool cleaning: A complete cleaning cycle for the entire pool.
Diagram showing a circular selection of cleaning modes: All-cover Mode, Wall only, Floor only, Waterline only, Wall then Floor, Full pool cleaning.

Figure 9: Versatile Cleaning Modes.

7.3 Indicator Lights

The device features a four-color indicator to communicate its status:

  • Red: Charging
  • Blue: Operating
  • Purple: Device failed to escape obstacle
  • Green: Fully Charged
Close-up of the robotic pool cleaner's indicator lights, showing Red for Charging, Blue for Operating, Purple for Obstacle, and Green for Fully Charged.

Figure 10: Four Color Indicator.

8. Maintenance

8.1 Filter Cleaning

Regularly clean the filters to maintain optimal cleaning performance. The Seauto SAT 40 uses a double filtration system for ultra-fine cleaning.

  1. Retrieve the cleaner from the pool using the provided hook.
  2. Open the filter compartment.
  3. Remove the filters and foam.
  4. Rinse the filters thoroughly with a hose to remove collected debris (leaves, algae, stones, pollen, soil, etc.).
  5. Ensure filters are completely dry before reinserting them.
Diagram illustrating the double filtration system, showing how it captures particles, fine dust, fine sand, algae, leaves, twigs, stones, and hairs.

Figure 11: Double Filtration Ultra-Fine System.

Four images demonstrating the ease of use, retrieval, maintenance, and cleaning of the robotic pool cleaner.

Figure 12: Easy Maintenance Steps.

8.2 General Care

  • Wipe down the exterior of the cleaner with a soft cloth after each use.
  • Inspect the tracks and brushes for any trapped debris or wear.
  • Store the cleaner in a shaded area, away from direct sunlight and extreme temperatures.

9. Troubleshooting

Problem Possible Cause Solution
Cleaner not moving or stuck (Purple indicator) Obstacle encountered, low battery, or debris in tracks. Retrieve cleaner, remove obstacles/debris, ensure full charge.
Poor cleaning performance Clogged filters, worn brushes, or incorrect cleaning mode. Clean filters, inspect/replace brushes, select appropriate cleaning mode.
Cleaner not charging (Red indicator) Charger not connected properly, faulty charger/battery. Ensure secure connection, check power outlet, contact support if issue persists.
Cleaner stops prematurely Low battery, excessive debris, or internal fault. Charge fully, clean filters, or contact support.

10. User Tips

  • The Seauto SAT 40 is ideal for both in-ground and above-ground pools with a flat bottom.
  • It is most effective in pools up to 3200 square feet (300 m²).
  • For optimal performance, ensure the pool's water depth is between 1.6 and 16.4 feet (0.5-5 m) and the PH value is between 7.0-7.8.
  • To start, simply click the Start button, choose your desired cleaning mode, and place the robot in the water. It will begin working automatically.
  • The device is designed to effortlessly climb stairs and navigate over obstacles, reducing cleaning resistance.
  • The removable battery allows for easy replacement and extended product lifespan.
Seauto SAT 40 Robotic Pool Vacuum, showing its robust tracks for climbing stairs easily.

Figure 13: Upgraded Tracks for Easy Stair Climbing.

Image showing the robotic pool cleaner moving over various obstacles like corners, drains, and uneven surfaces.

Figure 14: Obstacle Avoidance Feature.

Image displaying various pool shapes (Rectangle, Custom, Kidney, Curved) and indicating suitability for pools up to 3230 Sq.ft.

Figure 15: Ideal Pool Types and Sizes.

Images showing different pool surface materials: Concrete, Fiberglass, Vinyl Liner, Tile, Plaster, Pebble, indicating compatibility.

Figure 16: Perfect for All Types of Pool Surfaces.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Seauto website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.

© 2024 Seauto. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.