1. Introduction
Thank you for choosing the SEMBO BLOCK Kirin Warrior Mecha building block set. This set allows you to construct detailed, transformable mecha figures inspired by Chinese mythology. Each model features intricate designs and movable joints, providing an engaging building experience and dynamic display options. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your product.

2. Important Safety Information
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Keep small parts away from children under the recommended age to prevent choking hazards.
- Do not ingest any parts of the building blocks.
- Avoid exposing the product to extreme temperatures or direct sunlight for prolonged periods, as this may cause deformation or discoloration.
- Always supervise young children during assembly and play.
3. Package Contents
Upon opening the package, please verify that all components are present and undamaged. Your SEMBO BLOCK Kirin Warrior Mecha set typically includes:
- Building block pieces (various shapes and sizes)
- Detailed instruction manual for assembly
- Sticker sheet (if applicable)

4. Assembly and Setup
Follow the step-by-step instructions provided in the dedicated assembly manual included in your package. It is recommended to:
- Open the package and lay out all parts on a clean, flat surface.
- Sort the building blocks by color, size, or type to facilitate assembly.
- Carefully follow the numbered steps in the assembly manual.
- Ensure each piece is securely connected to prevent the model from falling apart.
- Apply stickers (if included) according to the manual for enhanced detail.
The assembly process is designed to be intuitive, but patience and attention to detail are key. If you encounter difficulties, double-check the previous steps.

5. Operating and Transformation
The Kirin Warrior Mecha models are designed with movable joints and, in some cases, transformable features. Refer to your specific model's instruction manual for detailed transformation steps.
5.1 Movable Joints
Each mecha features multiple points of articulation, allowing for dynamic posing. Gently manipulate the joints to achieve desired stances. Avoid excessive force to prevent damage.


5.2 Transformation (for applicable models)
Some Kirin Warrior Mecha models are designed to transform between robot and alternate modes (e.g., vehicle or beast mode). Consult the specific transformation sequence in your model's assembly manual. Ensure all parts are aligned correctly during transformation to avoid stress on the joints.

6. Care and Maintenance
- Cleaning: Use a soft, dry cloth to gently wipe dust from the model. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by immediate drying. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
- Handling: Handle the model with care, especially when posing or transforming, to avoid accidental breakage of small parts.
7. Troubleshooting
7.1 Missing or Damaged Pieces
If you find any missing or damaged pieces upon opening the package, please refer to the contact information provided in the Warranty/Support section. Provide details of the missing/damaged parts, ideally with reference to the assembly manual's part list.
7.2 Difficulty During Assembly
- Review Instructions: Double-check the current and previous steps in the assembly manual. Sometimes a small detail can be overlooked.
- Check Orientation: Ensure pieces are oriented correctly before attempting to connect them.
- Apply Gentle Pressure: Building blocks require firm but gentle pressure to snap into place. Avoid excessive force.
- Verify Part Selection: Confirm you are using the correct pieces for the current step.
7.3 Loose Joints
Over time, some joints may become slightly loose with frequent posing. This is generally normal wear and tear. For minor looseness, you can try applying a very small amount of clear nail polish or a specialized joint-tightening fluid to the ball joint or peg, allowing it to dry completely before reassembling. Use sparingly.
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | SEMBO BLOCK |
| Model Name | Kirin Warrior Mecha (Chinese Style God of War Set) |
| Material | Plastic |
| Block Size | Micro building block, Big building block (>1cm) |
| Is Electric | No Battery |
| Recommended Age | 14+ years, 18+ years |
| Gender | Unisex |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 32 cm x 25 cm x 10 cm |
| Package Weight | 0.7 kg |
Note: Specific model dimensions may vary. Refer to the individual model's packaging or instructions for precise measurements.
9. User Tips
- Organize Pieces: Before starting assembly, sort all pieces into small containers or bags. This significantly speeds up the building process and reduces frustration.
- Review Instructions First: Briefly skim through the entire instruction manual before starting to get an overview of the build process and identify any complex steps.
- Take Breaks: For larger or more intricate models, take short breaks to avoid eye strain and maintain focus.
- Display with Care: When displaying your finished model, ensure it is on a stable surface to prevent accidental falls.
10. Warranty and Support
For any questions, concerns, or support regarding your SEMBO BLOCK Kirin Warrior Mecha set, please contact the seller or manufacturer directly. Keep your purchase receipt and any product identification numbers handy when contacting support.
The manufacturer typically provides a limited warranty against manufacturing defects. Please consult the documentation included with your product for specific warranty terms and conditions.