Panasonic N2QAYB000820

Contents

Panasonic Viera TV Remote Control User Manual

Model: N2QAYB000820 / N2QAYB000816

1. Safety Precautions

  • Keep the remote control away from water, moisture, and high-temperature environments (such as near stoves or direct sunlight) to avoid short circuits or component damage.
  • Do not disassemble, crush, or puncture the remote control. If it malfunctions, contact professional after-sales service instead of repairing it yourself.
  • Keep the remote control out of the reach of children to prevent them from swallowing small parts (such as batteries) or damaging the device.
  • Use only the specified type of batteries (usually AA or AAA). Do not mix old and new batteries or different types of batteries to avoid leakage or explosion risks.

2. Setup

2.1 Battery Installation

To install batteries:

  1. Open the battery cover on the back of the remote control by sliding it in the direction indicated by the arrow.
  2. Insert the batteries correctly according to the positive (+) and negative (-) marks inside the battery compartment.
  3. Close the battery cover until it clicks into place to ensure it is securely fastened.
Open battery compartment of the remote control
Figure 1: Battery compartment with cover removed.

3. Operating Instructions

3.1 Key Functions Overview

Front view of the remote control
Figure 2: Front view of the remote control with labeled buttons.
Key NameFunction Description
Power ButtonPress once to turn on the TV; press again to turn off the TV.
Channel Buttons (△/▽)Press the △ button to switch to the previous channel; press the ▽ button to switch to the next channel.
Volume Buttons (+/-)Press the + button to increase the volume; press the - button to decrease the volume. Press and hold for continuous adjustment.
Number Buttons (0-9)Directly enter the channel number to switch to the corresponding channel quickly (e.g., press "1" and "2" sequentially to switch to channel 12).
Source ButtonPress to switch the TV's input source (e.g., HDMI 1, HDMI 2, AV, USB, etc.).
Menu ButtonOpen the TV's main settings menu, where you can adjust picture quality, sound, language, and other settings.
OK/Confirm ButtonConfirm the selected option in the menu or activate the highlighted function.
Back ButtonReturn to the previous menu or exit the current function.
Mute ButtonPress once to mute the sound; press again to restore the volume.
Sleep Timer ButtonPress repeatedly to set the TV to automatically turn off after a specified time (e.g., 15 minutes, 30 minutes, 60 minutes).
Picture Mode ButtonSwitch between preset picture modes (e.g., Standard, Vivid, Cinema, Energy Saving) for different viewing scenarios.

3.2 Basic Operation Steps

3.2.1 Turning On/Off the TV

  • To turn on: Press the Power Button on the remote control. Ensure the TV is connected to a power source.
  • To turn off: Press the Power Button again. Alternatively, use the Sleep Timer function to set an automatic shutdown.

3.2.2 Switching Channels

  • Method 1: Use the Channel Buttons (△/▽) to switch channels one by one.
  • Method 2: Enter the channel number directly using the Number Buttons (e.g., press "5" for channel 5, press "1" and "8" for channel 18).

3.2.3 Adjusting Volume

  • Press the Volume (+) button to increase the volume; press the Volume (-) button to decrease it.
  • For immediate silence, press the Mute Button.

3.2.4 Accessing Settings

  1. Press the Menu Button to open the main menu.
  2. Use the Channel (△/▽) and Volume (+/-) buttons to navigate through the menu options.
  3. Press the OK/Confirm Button to select the desired setting (e.g., Picture, Sound, Language).
  4. Adjust the parameters as needed, then press OK/Confirm to save.
  5. Press the Back Button or Menu Button to exit the menu.

3.2.5 Switching Input Sources

  1. Press the Source Button on the remote control.
  2. A list of available input sources (HDMI 1, HDMI 2, AV, etc.) will appear on the TV screen.
  3. Use the Channel (△/▽) buttons to select the desired source.
  4. Press the OK/Confirm Button to activate the selected source.
Video 1: Product overview and demonstration of the remote control.

4. Maintenance

4.1 Maintenance Tips

  • Clean the remote control regularly with a soft, dry cloth. Do not use water, alcohol, or chemical cleaners, as they may damage the surface or internal components.
  • If the remote control is not in use for a long time, remove the batteries to prevent leakage and corrosion.
  • Store the remote control in a dry, cool place to avoid dust accumulation and component aging.

5. Troubleshooting

5.1 Common Troubleshooting

ProblemPossible CausesSolutions
Remote control does not work
  1. Batteries are dead or installed incorrectly.
  2. There is an obstacle between the remote control and the TV's infrared receiver. The TV's infrared receiver is blocked or faulty.
  1. Replace with new batteries and ensure correct polarity.
  2. Remove obstacles and point the remote control directly at the TV's infrared receiver (usually located at the bottom or front of the TV). Check if the receiver is blocked; if the problem persists, contact after-sales service.
Buttons are unresponsive
  1. Buttons are stuck due to dust or debris.
  2. Internal contacts are worn.
  1. Gently press the stuck button to remove debris; clean the surface with a dry cloth.
  2. If the issue continues, replace the remote control or contact professional repair.
Volume/channel changes automatically
  1. Buttons are stuck.
  2. Battery leakage causes internal short circuits.
  1. Check and clean the buttons.
  2. Remove the batteries immediately, clean the battery compartment with a dry cloth, and replace with new batteries. If corrosion is severe, replace the remote control.
Remote control has a short operating distance
  1. Batteries are low.
  2. The infrared emitter (at the front of the remote) is dirty.
  1. Replace with new batteries.
  2. Clean the infrared emitter with a soft, dry cloth.

5.2 Important Notes

  • The remote control uses infrared technology. Ensure there is no strong light (such as fluorescent lamps) interfering with the infrared signal during use.
  • The actual key functions may vary slightly depending on the TV model. For model-specific functions, refer to the TV's user manual.

6. Specifications

  • Model: N2QAYB000820 / N2QAYB000816
  • Compatibility: Panasonic Viera TVs including TX-32A400E, TX-42A400E, TX-32AW404, TX-42AW404, TX-50AW404, TX50AW404, TX-32DW404, TX-LR24XM6, TX-L19XM6B, TX-39A400E.
  • Wireless Communication: IR (Infrared)
  • Use: TV
  • Dimensions (Approximate): 16cm (Length) x 5cm (Width) x 2.5cm (Thickness)
  • Weight (Approximate): 0.12 kg
Remote control dimensions: 16cm length, 5cm width, 2.5cm thickness
Figure 3: Remote control dimensions.

7. Warranty & Support

If your remote control is lost, damaged, or malfunctions, please contact the manufacturer or your retailer for assistance. They can provide information on compatible replacements or professional after-sales service.

For a detailed user manual in PDF format, you may refer to the official document: User manual (PDF).

8. User Tips

  • This remote control is a reliable replacement and works great for compatible Panasonic Viera TV models.
  • No programming is needed; simply install new batteries to start using it.

© 2023 All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.