BEITIAN BV-57D

Contents

Beitian BV-57D GNSS Receiver User Manual

Model: BV-57D (Datasheet for BU-27D Series)

Brand: BEITIAN

1. Introduction

The Beitian BV-57D GNSS Receiver is a high-performance, multi-band Global Navigation Satellite System (GNSS) receiver designed for precise positioning and timing applications. It supports GPS, BDS, GLONASS, and GALILEO constellations, making it suitable for a wide range of uses including AIS maritime navigation, time synchronization, road surveying, smart devices, driverless cars, vehicle positioning, and network optimization.

This manual provides detailed instructions for the setup, operation, and maintenance of your BV-57D GNSS Receiver, along with comprehensive specifications and troubleshooting tips.

2. Product Overview

2.1 Key Features

  • Built-in new chip for enhanced performance.
  • 5.0V/12.0V voltage selectable.
  • Supports GP+GL+BD+GA (GPS, GLONASS, BDS, GALILEO) multi-band reception.
  • Suitable for ocean ships, road surveying, smart devices, driverless cars, vehicle positioning, and network optimization.
  • Multiple connector options available (DB-9, USB, loose wires).
  • High-quality soft copper wire cable for strong bend resistance and low signal loss.
  • Integrated antenna module.
  • Supports customization for various modules and configurations.

2.2 What's in the Box

The standard package includes:

  • 1 x Beitian BU-27D Series Receiver (Note: Each product comes with different accessories; detailed configurations should be based on customer requirements.)
Product list showing one BU-27D Series Receiver
Figure 2.1: Product List (BU-27D Series Receiver)
Beitian GNSS Mushroom Head Receiver with various connector options and key features
Figure 2.2: Beitian GNSS Mushroom Head Receiver with key features and connector options
Application scenarios for the GNSS receiver
Figure 2.3: Application Scenarios (Smart device, Driverless car, Vehicle positioning, Network Optimization)

3. Specifications

The following tables detail the specifications for the Beitian BV-57D (and related BU-27D series) GNSS Receiver.

3.1 General Product Properties

Attribute Name Attribute Value
Brand NameBEITIAN
Model NameBU-27D
GPS typeReceiver & Antenna
Wireless FunctionYes
PCB includedYes
IS It With PCBYes
OriginMainland China
High-concerned chemicalnone

3.2 Detailed Technical Specifications (BU-27D Series)

The following table provides detailed technical specifications, primarily based on the BU-27D datasheet. Note that specific parameters may vary slightly between models (e.g., BV-57D, BV-27N, etc.).

Item Description
Electrical Characteristic
ChipB1300N
Receiver typeGPS L1, GLONASS G1, BDS B1, GALILEO E1, QZSS L1, SBAS L1, IRNSS
Default position systemGPS, GLONASS, BDS, GALILEO, IRNSS
Augmentation systemSBAS, QZSS
Channel120
Sensitivity
Tracking & Navigation-163dBm
Reacquisition-159dBm
Cold Start-148dBm
Hot Start-159dBm
Accuracy
Horizontal Position1.5m CEP
Velocity0.1m/s CEP
Acquisition
Cold Start28s
Hot Start1s
AGPS Time To First Fix1.5s
Baud Rate9600~2000000bps, default 115200bps, support sleep mode
LevelRS-232
ProtocolNMEA
Data Output
NMEA StatementRMC, VTG, GGA, GSA, GSV, GLL
Update Rate1~10Hz (default: 1Hz)
FLASHSupport, configuration can be changed, will not be lost in the event of power outage
Work Restrictions
High50,000m
Speed500m/s
Gravitational Acceleration<4g
Power Consumption
VoltageDC Voltage 9.0V-34.0V, Typical: 12.0V
Current20mA/12.0V
Mechanical Specifications
DimensionΦ96mm*124mm
Weight260g
ConnectorDB-9 female interface
Cable Length3 meters
Temperature
Operating-40°C ~ +85°C
Storage-40°C ~ +105°C
Detailed specifications table for various BU/BV series models
Figure 3.1: Detailed Specifications Table (from Datasheet)
Structural diagram with dimensions for the GNSS receiver
Figure 3.2: Structural Diagram with Dimensions (Φ96.6mm diameter, 124mm height)

4. Setup

4.1 Physical Installation

The BV-57D is designed as a mushroom-style antenna receiver. Ensure it is mounted in a location with a clear, unobstructed view of the sky for optimal satellite reception. The base allows for DIY installation.

4.2 Connection Options

The receiver offers multiple connection types to suit various applications. Choose the connector type that matches your system requirements:

  • DB-9 Power Cord: Standard serial connection with integrated power.
  • Four Exposed Wires: For custom wiring and integration into existing systems.
  • DB-9 + USB: Combines serial data with USB connectivity.
  • DB-9: Standard serial data output.
  • USB: For direct connection to a computer or compatible device.
Image showing various connector options for the GNSS receiver
Figure 4.1: Available Connector Types

4.3 DB-9 Pin Description

For models utilizing the DB-9 female interface, refer to the following pinout for correct wiring:

Pin description diagram for the DB-9 female connector
Figure 4.2: DB-9 Female Connector Pinout
PIN Name I/O Description
9VCCIDC 9.0V-34.0V, supply input, Typical: 12.0V
2TXORS-232 Serial Data Output
3RXIRS-232 Serial Data Input
5GNDGGround

5. Operation

5.1 GNSS Mode

The BV-57D receiver automatically connects to multiple satellite systems including GPS, GLONASS, BDS, and GALILEO. It provides excellent sensitivity and acquisition time for meter-level precision positioning.

Diagram illustrating the GNSS mode with satellites and connection to serial device/computer equipment
Figure 5.1: GNSS Mode Operation Diagram

5.2 Data Output Protocol (NMEA)

The receiver outputs positioning data using the NMEA 0183 version 4.10 standard. This data can be read by a serial device or computer equipment. The default baud rate is 115200bps, with support for sleep mode and configurable rates from 9600 to 2000000bps.

The NMEA protocol messages include various data types such as time, position, satellite information, and ground speed. For detailed information on the NMEA frame structure and specific message types (GGA, GSA, GSV, RMC, THS, GLL, GST, GMP), please refer to the official datasheet: Beitian BU-27D GNSS Receiver Datasheet (PDF).

Satellite count chart for GPS, BeiDou, Galileo, and GLONASS
Figure 5.2: BU Series Satellite Count Chart

6. Troubleshooting

If you encounter issues with your BV-57D GNSS Receiver, consider the following common problems and solutions:

Diagram illustrating common positioning problems and how the product solves them
Figure 6.1: Common Positioning Problems and Solutions

6.1 Poor Positioning Accuracy or Signal

  • Check Line of Sight: Ensure the receiver has a clear, unobstructed view of the sky. Obstacles like buildings, dense foliage, or metal structures can block satellite signals.
  • Interference: Keep the receiver away from sources of strong electromagnetic interference (e.g., high-power radio transmitters, large electrical motors).
  • Cable Integrity: Inspect the cable for any damage or kinks. The receiver uses high-quality soft copper wire, but physical damage can still occur.
  • Power Supply: Verify that the receiver is receiving stable power within the specified voltage range (9.0V-34.0V DC, typical 12.0V).

6.2 No Data Output

  • Connection: Double-check all cable connections (DB-9, USB, loose wires) to ensure they are secure and correctly wired according to the pin description (Section 4.3).
  • Baud Rate: Confirm that your receiving device (e.g., computer, serial device) is configured to the correct baud rate (default 115200bps) and other serial port settings.
  • Driver: For USB connections, ensure the necessary drivers are installed on your computer. Refer to the product information for driver availability.
  • Software Configuration: Verify that your application software is correctly configured to read NMEA data from the connected port.

6.3 Receiver Not Powering On

  • Power Source: Ensure the power source is active and providing the correct voltage and current.
  • Wiring: Check the VCC and GND connections, especially if using loose wires or a custom power setup.

7. Maintenance

To ensure the longevity and optimal performance of your Beitian BV-57D GNSS Receiver, follow these maintenance guidelines:

  • Cleaning: Keep the exterior of the receiver clean and free from dust, dirt, and debris. Use a soft, dry cloth for cleaning. Avoid harsh chemicals or abrasive materials.
  • Environmental Protection: While designed for outdoor use, protect the receiver from extreme weather conditions when possible. Avoid prolonged exposure to direct sunlight, heavy rain, or corrosive environments.
  • Cable Care: Handle the connecting cable with care. Avoid sharp bends, pulling, or placing heavy objects on it, as this can damage the internal copper wires.
  • Temperature: Operate and store the device within the specified temperature ranges (-40°C to +85°C for operating, -40°C to +105°C for storage) to prevent damage.
  • Firmware Updates: Periodically check the manufacturer's website or contact support for any available firmware updates that may improve performance or add new features.

8. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. However, general best practices for GNSS receivers include:

  • Optimal Placement: Always aim for the highest possible mounting point with the clearest view of the sky to maximize satellite visibility and signal strength.
  • Cable Management: Secure cables to prevent accidental disconnections or damage, especially in marine or vehicle environments where movement is common.
  • Software Compatibility: Ensure your data logging or navigation software is fully compatible with NMEA 0183 data and correctly configured for the receiver's output.
  • Power Stability: Use a stable power supply to avoid unexpected shutdowns or data corruption.

9. Warranty & Support

For warranty information, technical support, and additional resources, please contact BEITIAN Official Store directly or refer to the product documentation provided. The official datasheet contains comprehensive details that can assist with advanced configurations and troubleshooting.

You can find the full item guides and documents, including the user manual in PDF format, at the following link: Beitian BU-27D GNSS Receiver Datasheet (PDF).

Screenshot of a file explorer showing instruction manual, example program, host computer, and serial port driver files
Figure 9.1: Available Product Information and Resources

© 2023 BEITIAN Official Store. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.