FLYDIGI B9X

Contents

Flydigi B9X Magnetic Phone Cooler User Manual

Model: Flydigi B9X

1. Introduction

The Flydigi B9X Magnetic Phone Cooler is a high-performance cooling fan designed to prevent overheating in mobile devices during intensive use such as gaming, live streaming, or video recording. It features advanced semiconductor cooling technology, intelligent temperature control, and customizable RGB lighting. The B9X is compatible with a wide range of smartphones, including iPhones with magnetic suction capabilities and Android devices using the provided magnetic adhesive pad.

Key Features:

  • 30W Overclocked Cooling: Utilizes a 30W semiconductor chip, 6000RPM fan, and 120 aluminum fins for instant cooling, preventing game lag.
  • Smart App Control: Manage modes, customize RGB light effects, and set auto-shutdown timers via the Flydigi Game Center App.
  • Strong Magnetic Attachment: Features a ≥12N magnetic force for secure attachment to iPhone 12–17 series. Includes a magnetic adhesive pad for other devices.
  • Ultra-Quiet & Safe: Operates at a low noise level of ≤35dB. Incorporates intelligent overheat/overcool protection with LED alerts, automatically pausing and resuming operation as needed.
Flydigi B9X Magnetic Phone Cooler with packaging and cable
The Flydigi B9X Magnetic Phone Cooler, its Type-C cable, and magnetic adhesive pad.
Flydigi B9X cooler with vibrant RGB lighting
The Flydigi B9X cooler showcasing its RGB lighting effects.

2. Package Contents

Please check the box for the following items:

  • 1 x Flydigi B9X Magnetic Phone Cooler
  • 1 x Type-C Power Cable
  • 1 x Magnetic Adhesive Pad (for non-magnetic phones)

3. Setup and Installation

Product Overview Diagram:

Diagram of Flydigi B9X components: Protective steel mesh, switch, heat dissipation fins, air outlets, protective fences, Type-C power supply port, air intake, refrigeration surface.
Diagram illustrating the main components of the Flydigi B9X cooler.

Installation for Phones without Magnetic Suction Function (e.g., most Android models):

  1. Clean the back cover of your phone thoroughly.
  2. Peel off the white release paper from the magnetic adhesive pad (ensure the transparent plastic tab remains).
  3. Align and firmly stick the pad to the desired position on your phone's back. Ensure full adhesion and allow 1 hour for the adhesive to set.
  4. Insert the Type-C power cable into the cooler's port and connect the other end to a power source (a 30W PD charger is recommended for optimal performance).
  5. Attach the cooler to the magnetic adhesive pad on your phone.
  6. Briefly press the power button on the cooler to activate cooling.
Flydigi B9X magnetic attachment for iPhone 12+ (direct) and Android/Tablet (with magnetic pad)
Illustration of magnetic attachment for iPhones (direct) and Android/Tablets (with magnetic pad).

Installation for Phones with Magnetic Suction Function (e.g., iPhone 12/13/14/15/16 series):

  1. Insert the Type-C power cable into the cooler's port and connect the other end to a power source (a 30W PD charger is recommended for optimal performance).
  2. Attach the cooler directly to the phone's back.
  3. Briefly press the power button on the cooler to activate cooling.
Flydigi B9X cooler attached to an iPhone
The Flydigi B9X cooler magnetically attached to an iPhone.

4. Operating Instructions

Basic Operation:

  • Power On/Off: Short press the power button. The cooler will start in the default intelligent variable frequency extreme cold mode.
  • Switch Cooling Mode: Long press the power button to cycle between cooling modes:
    • White light double flashing: Fixed power mode.
    • Blue light double flashing: Intelligent frequency conversion mode.
  • Switch Light Effects: Double click the power button to change the RGB lighting effects.

Smart Frequency Control:

The cooler automatically adjusts its cooling power based on the detected temperature of the cooling surface. For maximum performance, it is essential to use a PD protocol charger of 30W (12V 2.5A) or higher. Without a sufficient power supply, the cooler may not reach its full cooling potential.

RGB temperature control ring, intelligent frequency conversion visualization (blue for low load, warm for high load)
The RGB temperature control ring visually indicates load: blue for low load (1-30W auto-switch) and warm colors for high load (maintaining 30W full power).

Flydigi Game Center App Control:

For advanced control and customization, download the Flydigi Game Center App. Scan the QR code below or search for the app in your device's app store. Connect the cooler via Bluetooth to unlock additional features:

  • Access multiple cooling modes.
  • View more tutorials and usage guides.
  • Customize RGB light effects.
  • Set overheat protection and auto-shutdown timers.
  • Fine-tune the custom frequency conversion heat dissipation curve.
QR code to download Flydigi Game Center App
Scan this QR code to download the Flydigi Game Center App.
Flydigi Game Hall APP interface showing cooling modes, overheat protection, and custom light effects
The Flydigi Game Hall APP provides various cooling modes, overheat protection, and custom light effects.

5. Maintenance

  • Cleaning: Wipe the exterior of the cooler with a soft, dry cloth. Do not use harsh chemicals or abrasive materials. Ensure air inlets and outlets are free from dust and debris for optimal performance.
  • Storage: When not in use, store the cooler in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting and Precautions

Common Questions (FAQs):

Q: Is a 30W (12V 2.5A) PD charger required?
A: Yes, a 30W PD charger is required to activate the maximum cooling power of the device.
Q: Why does the cooler suddenly stop working?
A: The cooler may trigger automatic protection due to extreme temperatures (either too cold or too hot). Please check the real-time status via the Flydigi Game Center app. Ensure air inlets and outlets are not blocked.
Q: Does the B9X have a built-in battery?
A: No, the Flydigi B9X requires continuous external power via its Type-C cable to operate.

Operation Prompts:

  • Blue light flashing: Indicates subcooling protection has been triggered, meaning the radiator is in a low-temperature state for an extended period. This function can be adjusted or turned off in the APP.
  • Red light flashing: Indicates overheating protection has been triggered. Please check if the air inlet and outlet are blocked and clear any obstructions.

General Precautions:

  • Do not insert fingers or any objects into the vents of the cooler to avoid injury.
  • The device contains magnets. Keep it at least 15cm away from implanted medical devices such as pacemakers.
  • Avoid prolonged contact with colored silicone cases, as this may lead to color transfer onto the cooler.
  • To prevent condensation, utilize the Smart Frequency Control or Expert Mode settings in the app to adjust the temperature and effectively reduce condensation formation.
  • This product is designed for use with phones or tablets that have not been disassembled or repaired. Using it with other or previously disassembled/repaired devices may cause damage.
FlyOC™ intelligent temperature control 4.0 and NTC sensor to prevent condensation
FlyOC™ intelligent temperature control 4.0 with NTC temperature detection sensor actively adjusts power to prevent condensation.

7. Specifications

Feature Specification
Brand Name FLYDIGI
Model Number Flydigi B9X
Accessories Type Cooling Systems
With USB Yes (Type-C)
Compatible Brand/Model Mobile Device (iPhone 12-17 series, Samsung, Android)
Origin Mainland China
Weight 103g
Noise Level ≤35dB
Cooling Performance Direct temperature drop of up to 45°C
Power Input 1-30W Intelligent Frequency Conversion (requires 30W PD charger for max output)
Magnetic Force ≥12N
Comparison table of Flydigi B9X vs B8X cooling performance, smart inverter, noise, lamp effect, and APP experience.
Comparison of B9X and B8X models, highlighting B9X's superior refrigeration and APP experience.
Product specifications image showing cooler, cable, and magnetic pad
Visual representation of the product and its accessories.

8. User Tips

  • For optimal cooling performance, always use a 30W Power Delivery (PD) compatible charger.
  • If you are using a non-magnetic phone, ensure the magnetic adhesive pad is securely attached to your phone's back and allowed to set for at least 1 hour before attaching the cooler.
  • Download the Flydigi Game Center app to unlock advanced features, customize RGB lighting, and fine-tune cooling modes for your specific needs.
  • The fan is noted for its quiet operation, making it suitable for extended gaming or streaming sessions without distraction.

9. Warranty and Support

Warranty & Service Policy:

  • 7-Day Return: Undamaged products can be returned within 7 days of purchase.
  • 15-Day Replacement: Free replacement is provided for quality issues within 15 days of purchase, with shipping costs covered by the seller.
  • 1-Year Repair Warranty: A 1-year repair warranty is offered for quality problems occurring within this period. Users are responsible for shipping costs for repairs.
  • Warranty Limitations: The warranty service is limited to problems that occur during the warranty period under normal use. Any damage or failure caused by abnormal use, improper maintenance, or storage (not in accordance with the user manual), or repairs performed after the warranty period expires, will incur repair costs to be borne by the user.

Return/Replacement Process:

For quality issues within 15 days of purchase, please return the product to Flydigi or the original retailer.

Repair Process:

If a quality problem arises between 15 days and one year from the date of purchase, users can directly contact Shanghai Flydigi Electronics Technology Co., Ltd by phone or send the product back to them after confirming the quality issue. Alternatively, you may go to the dealer from whom you purchased the product, provide the product and repair certificate, and the dealer will transfer it to Flydigi for repair. Flydigi will contact users within the promised after-sales service period and return the repaired products.

Important Notes for Service:

  • Always read the instructions carefully before using Flydigi products.
  • Do not attempt to disassemble or repair Flydigi products yourself, as this will void your warranty rights.

Contact Information:

Shanghai Flydigi Electronics Technology Co., Ltd
Address: 17th Floor, Building 1, No. 770 Songhu Road, Yangpu District, Shanghai
Website: www.flydigi.com
Service Hotline: 400-850-3336

For a comprehensive user manual, you may refer to the official PDF document: Flydigi B9X User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.