Erilles A7 Pro

Contents

Erilles A7 Pro Wireless Bluetooth Earphones User Manual

1. Introduction

The Erilles A7 Pro are wireless Bluetooth headphones designed for a superior audio experience. They support Bluetooth connectivity, touch control, and call noise reduction, making them compatible with a wide range of Bluetooth-enabled devices such as mobile phones, tablets, and computers. Enjoy clear sound quality and a convenient user experience.

2. Package Contents

Please check the box for the following items:

  • A7 Pro Wireless Bluetooth Earphones (Left and Right)
  • Charging Case
  • USB Charging Cable
  • User Manual (English/Chinese)
  • Lanyard
Contents of the A7 Pro package: earbuds in case, lanyard, USB-C charging cable, and user manual.
Figure 2.1: Package Contents

3. Basic Operation and Setup

3.1 Power On/Off

  • Power On: Open the charging case cover. The headphones will automatically enter standby ready state.
  • Power Off: Place the headphones into the charging case and close the cover. They will automatically disconnect and shut down.

3.2 Bluetooth Pairing

  • First Use: Turn on Bluetooth on your device. Wait for the pairing request prompt, then click to connect. Once connected, you can take out the headphones for use.
  • Re-pairing: Place both headphones back into the charging case, close the cover for 5 seconds, then open it (no need to take them out). The headphones will automatically restart in pairing mode. Wait for the pairing request prompt on your device.

3.3 Automatic Linking

The earbuds feature one-click activation and intelligent pairing for automatic connection at startup, compatible with Bluetooth-enabled devices.

Image illustrating '20H Strong Battery Life' and 'Pick Up and Use Automatic Linking' features, showing earbuds in case and being taken out.
Figure 3.1: Automatic Linking Feature

4. Controls and Functions

4.1 Music Control

  • Play/Pause: Tap the touch button once.
  • Previous Track: Double-tap the left ear touch button quickly.
  • Next Track: Double-tap the right ear touch button quickly.
  • Volume Adjustment: Triple-tap the left ear touch button quickly to decrease volume; triple-tap the right ear touch button quickly to increase volume.

4.2 Call Control

  • Answer Call: Tap the touch button once.
  • End Call (during call): Tap the touch button once.
  • Reject Call (incoming call): Double-tap the touch button quickly.
Diagram detailing 'Smart Touch Easy to Operate' with touch control functions for answer/hang up, play/pause, volume, track skip, reject call, Siri/voice assistant, and power on/off.
Figure 4.1: Smart Touch Controls

5. Charging Instructions

5.1 Charging Method

Insert the charging cable into the headphone's charging port and connect the other end to a 5V USB charging device (e.g., charger, computer).

5.2 Indicator Status

The red light stays on during charging. The green light stays on when fully charged.

5.3 Charging Time

Charging typically takes about 1.5-2 hours. It is recommended to unplug the charging cable after a full charge to preserve battery life.

Video 5.1: Unboxing and Initial Look at the A7 Pro Earphones (may show charging port)

6. Care and Maintenance

  • Avoid using or charging the headphones in high temperature, low temperature, or humid environments to prevent damage to the battery.
  • The headphones contain a built-in lithium polymer battery. Do not disassemble, squeeze, or short-circuit it to prevent potential hazards.
  • When not in use for a long time, store the headphones after a full charge and recharge them every 3 months to extend battery life.

7. Specifications

FeatureSpecification
Product ModelA7 Pro
Brand NameErilles
Bluetooth Version5.3
Bluetooth Distance10 meters (effective range)
Continuous Listening TimeUp to 6 hours
Talk Time4.5 hours
Standby Time240 hours
Charging Time1 hour (for full charge)
Charging Case Capacity250mAh (provides about 3 full earphone charges)
Headphone Battery Capacity40mAh
Speaker TypeF13 stereo speaker
Driver Diameter10mm
Frequency Response Range20 - 20000Hz
Sensitivity100dB
Impedance RangeUp to 32 Ω
Total Harmonic Distortion1%
MaterialPlastic
FeaturesWaterproof, With microphone, Apple Siri Support, Active Noise Cancelling (Note: Active Noise Cancelling is listed as 'No' in some specs, but 'Active Noice Cancelling' is listed as a feature. Please refer to product packaging for definitive features.)
WaterproofYes
With MicrophoneYes
Sound IsolatingYes
Charging MethodCharging case
CertificationsCE, FCC, RoHS
Table of 'PRODUCT PARAMETERS' including model, Bluetooth version, distance, battery life, talk time, standby, charging time, speaker, battery capacity, size, and weight.
Figure 7.1: Product Parameters

8. Troubleshooting

  • Q: Cannot search for the headphones?
    A: Ensure the charging case cover is open and the headphones are in pairing mode. Restart Bluetooth on your device and try again. You can also close the cover for 5 seconds, then open it to reset, and wait for the pairing request prompt.
  • Q: Fuzzy sound/connection drop?
    A: Move closer to the Bluetooth device, remove any obstacles between the device and headphones, or re-pair and wait for the request prompt. The effective Bluetooth distance is about 10 meters.
  • Q: Cannot charge?
    A: Check if the charging cable is properly connected. Try replacing the charging device or cable and try again.

9. User Tips

  • Users report great sound quality and a comfortable fit.
  • The battery life is generally considered decent when fully charged.
  • For calls and meetings, ensure you are within the 10-meter Bluetooth range and minimize obstacles for optimal microphone performance.

10. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.