1. Product Overview
The SUMRY MPS-VIII ECO SERIES is a versatile 3.6KW 24V 120V pure sine wave solar inverter designed for both on-grid and off-grid applications. It integrates a powerful MPPT solar charge controller and a high-efficiency inverter to provide reliable power for various household and outdoor uses. This inverter is capable of operating with or without a battery, offering flexibility in system design.
Key Features:
- Pure sine wave output (on/off Grid capability)
- Output power factor 1.0
- WIFI & GPRS connectivity for iOS and Android monitoring
- Ability to run without a battery
- One-key restoration to factory settings
- Built-in Lithium battery automatic activation
- AC output voltage 120VAC
- Built-in 120A MPPT Solar charge controller with max 4200W PV input (for 3.6kW model)
- High PV input voltage range (60~500VDC)
- Integrated anti-dust kit for harsh environments
- Smart battery charge design to optimize battery life
- Dual output functionality
- Intelligent Protection System with 15 protection modes (Overload, Overheating, High Back Low, Battery, Short Circuit, Supercurrent, Anti Reverse, Energy fallout Protection)
- Intelligent Cooling Fan with temperature-sensitive speed adjustment
2. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your solar inverter. It is recommended that installation be performed by a qualified professional.
2.1 Basic System Architecture
The inverter integrates solar power, utility grid, and battery power to supply AC loads. It can also work without a battery, directly powering loads from the PV array.
2.2 Wiring and Connections
Before installing and using the inverter, ensure all connections are secure and correctly polarized. Always ground the PE protective conductor.
Circuit Breaker Installation:
It is recommended to install 4 circuit breakers in the following positions to prevent misconnection, reverse connection, short circuit, or overload:
- Between the battery pack and the inverter battery input.
- Between the solar panel and the photovoltaic input of the inverter.
- Between the power input of the grid and the inverter.
- Between the inverter output and the load.
Cable Specifications:
- PV Wire: 12AWG
- Battery Wire: 2AWG
- AC Output Cable: 12AWG
- Recommended Breaker for AC Output: 32A
2.3 Battery Compatibility
The inverter is compatible with various battery types, including GEL, LI (Lithium), AGM, and FLD. It also supports a 'USER' defined battery type for custom settings. The inverter can operate without a battery, powering loads directly from the PV array.
3. Operating Instructions
The inverter offers flexible charging and output modes to suit different energy management needs.
3.1 Charging Mode Priority
You can configure the inverter to prioritize different power sources for charging the battery:
- Solar First: Prioritizes solar power for charging.
- Mains First: Prioritizes utility grid power for charging.
- Hybrid Charge: Uses a combination of solar and mains power.
- Only Solar: Charges exclusively from solar power.
3.2 Output Mode Priority
You can also set the priority for the inverter's output to power your loads:
- Solar First: Prioritizes solar power to supply loads.
- Mains First: Prioritizes utility grid power to supply loads.
- Inverter First: Prioritizes inverter (battery) power to supply loads.
- Hybrid Output: Uses a combination of available power sources.
3.3 Monitoring and Control
The inverter can be monitored and controlled remotely via the Smartess App, available for both iOS and Android devices. This requires the optional WIFI & GPRS module.
3.4 485 Communication Line
The 485 communication line connects the RS485 port of a lithium battery (with a BMS protection board) to the COMM port of the inverter. This allows for the export of lithium battery data to the inverter's display screen for easy monitoring. Note that a specific PACE 485 communication cable may be required if the battery uses a PACE BMS protection board.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your SUMRY solar inverter.
4.1 Cooling System
The inverter features an intelligent cooling fan with a built-in sensor chip that adjusts rotation speed based on ambient temperature. This helps maintain optimal operating temperatures. Ensure the inverter's ventilation openings are clear and free from obstructions.
4.2 Dust Protection
The inverter is equipped with a built-in anti-dust kit, making it suitable for harsh environments. Periodically inspect and clean the exterior of the inverter to prevent dust buildup, which can affect cooling efficiency.
4.3 Battery Management
The smart battery charge design helps optimize battery life. For systems with batteries, regularly check battery connections for corrosion and ensure they are tightened. Follow the battery manufacturer's guidelines for specific maintenance procedures.
5. Troubleshooting
The SUMRY inverter incorporates an intelligent protection system to safeguard itself and connected devices. Understanding these protection modes can help in diagnosing issues.
5.1 Intelligent Protection System
The inverter is designed with 15 intelligent protection modes, including:
- Overload Protection
- Overheating Protection
- High Back Low Protection
- Battery Protection
- Short Circuit Protection
- Supercurrent Protection
- Anti Reverse Protection
- Energy Fallout Protection
If the inverter enters a protection mode, it will typically display an error code or indicator. Refer to the display for specific fault information.
5.2 Common Issues and Solutions
- No Power Output: Check all circuit breakers (battery, solar, grid, load) for trips. Verify battery voltage and solar input.
- Overload Error: Reduce the connected load. Ensure total appliance wattage does not exceed the inverter's rated output (3600W).
- Overheating Error: Ensure adequate ventilation around the inverter. Clean any dust from vents. Check ambient temperature.
- Battery Issues: Check battery connections. Ensure battery type settings are correct in the inverter's menu.
- Communication Issues (485/WIFI): Verify cable connections for 485. Ensure WIFI/GPRS module is correctly installed and configured.
5.3 Factory Reset
The inverter supports a 'One-key restoration to factory settings' feature. This can be used as a last resort for troubleshooting persistent issues after checking all other possibilities. Refer to the inverter's display menu for instructions on performing a factory reset.
6. Specifications
Detailed technical specifications for the SUMRY MPS-VIII ECO SERIES 3.6KW 24V inverter.
| Parameter | Value |
|---|---|
| Model Number | 3600W 24V |
| Type | Other (Solar Inverter) |
| Material | Plastic |
| Origin | Mainland China |
| Feature | Work without battery, reverse excess current to grid |
| Maximum PV Input Power | 4200W |
| Rated Output Power | 3600W/3600VA |
| Maximum Solar Charging Current | 120A |
| Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
| MPPT Voltage Range | 60~450VDC |
| Maximum PV Input Current | 1/18A |
| Nominal AC Output Voltage | 120VAC (100/105/115V settable) |
| AC Output Voltage Range | 90-150VAC |
| Nominal AC Output Current | 30A |
| Maximum Conversion Efficiency (DC/AC) | 98% |
| Full Load | 3600W |
| Maximum AC Input Current | 40A |
| Output Wave Form | Pure sine wave |
| Battery Voltage | 24V |
| Physical Dimensions (L*W*H) | 420*350*110 mm |
| Net Weight | 8.8 kg |
| Interface | RS232/RS485/WIFI/GPRS/LITHIUM BATTERY |
| Operating Environment Humidity | 5% to 95% Relative Humidity (Non-condensing) |
| Operating Temperature | -15°C~50°C |
| Compliance Safety | CE |
7. Warranty and Support
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact your vendor or the manufacturer directly. Ensure you have your product model and serial number available when seeking support.
The inverter's 'One-key restoration to factory settings' feature can resolve many software-related issues. For hardware concerns, professional service is recommended.
8. User Tips
- Professional Installation: Always ensure the inverter is installed by a certified electrician or solar professional to guarantee safety and compliance with local regulations.
- Regular Monitoring: Utilize the Smartess App to regularly monitor your system's performance, battery status, and energy flow. This helps in early detection of potential issues.
- Ventilation: Ensure the inverter is installed in a well-ventilated area, free from direct sunlight and obstructions, to allow the intelligent cooling fan to operate effectively.
- Load Management: Be mindful of the total wattage of appliances connected to the inverter to avoid overloading, especially during peak usage times.