Miwayer WS-mini2

Contents

Miwayer WS-mini2 2.4GHz Wireless Guitar System

Instruction Manual

1. Product Overview

The Miwayer WS-mini2 is a 2.4GHz wireless guitar system designed for musicians seeking high-fidelity audio transmission without the constraints of cables. It features a transmitter and receiver pair, a magnetic charging case, and versatile compatibility with various musical instruments.

Miwayer WS-mini2 Wireless Guitar System components
Figure 1: Miwayer WS-mini2 Wireless Guitar System, showing the transmitter, receiver, charging case, and 6.35mm adapters.

Key Features:

  • High Definition Audio Quality: 48K/16bit digital audio transmission for pure and authentic sound.
  • Convenient Charging Solution: Magnetic charging case provides up to 60 hours of extended battery life.
  • User-Friendly Design: Plug-and-play functionality with a 210-degree rotatable connector for easy instrument attachment.
  • Versatile Compatibility: Compatible with 1/4" and 1/8" interface audio instruments, including guitars, basses, keyboards, violins, and mixers.
  • Reliable Performance: Four channels, strong anti-interference capability, up to 40 meters (131 ft) outdoor transmission range, and less than 12ms latency.

2. Setup Instructions

Follow these steps to set up your Miwayer WS-mini2 Wireless Guitar System:

  1. Charge the Devices: Before first use, ensure both the transmitter and receiver are fully charged using the magnetic charging case and the provided USB Type-C cable. The charging case itself should also be charged.
  2. Connect the Transmitter: Plug the transmitter (labeled 'TRANSMITTER') into your instrument's output jack (e.g., guitar, bass). The 210-degree rotatable plug allows for flexible positioning to fit various instrument designs, including boat-shaped guitars. If your instrument requires a 3.5mm (1/8") plug, use the provided 6.35mm to 3.5mm adapter.
  3. Connect the Receiver: Plug the receiver (labeled 'RECEIVER') into the input jack of your amplifier, mixer, effect pedal, or other audio equipment. Use the appropriate adapter if necessary.
  4. Power On: Press and hold the power button on both the transmitter and receiver to turn them on. The system is designed for plug-and-play operation, so no manual pairing is typically required.
  5. Channel Selection: The system has 4 channels. If using multiple wireless systems simultaneously, ensure each pair is on a different channel to avoid interference. If two pairs use the same channel, power them on one by one.
Connecting wireless guitar system to instrument and amplifier
Figure 2: Diagram illustrating the connection of the transmitter to a guitar and the receiver to an amplifier, highlighting the 2.4GHz digital audio transmission, 100 feet transmission range, and <4ms latency.
210 degree rotating head design
Figure 3: The 210-degree rotating head design, demonstrating its flexibility for various instrument jack placements.
2-in-1 design plug for 1/4 inch and 1/8 inch interfaces
Figure 4: The 2-in-1 design plug, compatible with both 6.35mm (1/4") and 3.5mm (1/8") audio interfaces for instruments like keyboard piano, guitar, bass, violin, and mixer.

3. Operating Instructions

Once set up, operating the WS-mini2 system is straightforward:

  • Power On/Off: Press and hold the power button on each unit for a few seconds to turn them on or off. The indicator light will confirm the status.
  • Automatic Connection: The transmitter and receiver will automatically connect once powered on. The indicator lights will show a stable connection.
  • Monitoring Battery Life: The units and the charging case have indicator lights to show remaining battery life. Refer to the specifications for detailed battery life information.
  • Using Multiple Devices: The system supports unlimited simultaneous use. However, if you are using multiple WS-mini2 pairs and they happen to be on the same channel, power them on one by one to prevent initial interference.
Wireless guitar system in various performance settings
Figure 5: The WS-mini2 system being used in various musical applications, including keyboard, guitar, bass, violin, and mixer setups.
Multiple wireless units connected to a mixer
Figure 6: Illustration of unlimited simultaneous use with multiple WS-mini2 units connected to a mixer, with a note to power on units one by one if using the same channel.

4. Maintenance

To ensure the longevity and optimal performance of your Miwayer WS-mini2 Wireless Guitar System, follow these maintenance guidelines:

  • Charging: Always use the provided USB Type-C cable and magnetic charging case for charging. Avoid using damaged cables or non-compatible chargers.
  • Battery Care: For best battery health, avoid completely draining the batteries frequently. Recharge the units and case regularly, especially if storing for extended periods.
  • Cleaning: Wipe the transmitter, receiver, and charging case with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Storage: Store the units in their magnetic charging case when not in use. This not only keeps them charged but also prevents them from being lost. Store in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Moisture: Keep the devices away from water and high humidity to prevent damage to internal electronic components.
Magnetic charging case for portable storage
Figure 7: The magnetic charging case, designed for convenient charging and portable storage of the transmitter and receiver.
Battery life illustration
Figure 8: Illustration of the long-lasting rechargeable battery, showing 20 hours of battery life per device and an additional 60 hours with the charging case.

5. Troubleshooting

If you encounter issues with your WS-mini2 system, refer to the following troubleshooting tips:

Problem Possible Cause Solution
No sound or intermittent signal
  • Low battery on transmitter or receiver.
  • Units are out of range.
  • Loose connections.
  • Interference from other 2.4GHz devices.
  • Recharge both units and the charging case.
  • Ensure transmitter and receiver are within 40m (131 ft) outdoors or 20m (66 ft) indoors.
  • Check that both units are securely plugged into the instrument and amplifier/mixer.
  • Move away from other wireless devices or sources of electromagnetic interference.
Interference when using multiple systems
  • Multiple pairs powered on simultaneously on the same channel.
  • Power on each pair one by one to allow them to establish their connection without conflict.
High latency or delay
  • Excessive distance between units.
  • Obstructions (walls, large objects) between units.
  • Reduce the distance between the transmitter and receiver.
  • Ensure a clear line of sight between the units if possible.

6. Specifications

Feature Detail
Brand Name Miwayer
Model WS-mini2
Material ABS
Number of Channels 4
Audio Quality 48K/16bit High-definition digital audio transmission
Frequency Band 2.4GHz ISM band
Transmission Range 40 m (131 ft) outdoors; 20 m (66 ft) through walls indoors
Latency 12ms
Signal-to-Noise Ratio -98dB
Dynamic Range >105dB
Frequency Response 20-20KHz; +1dB/-3dB
Multiple Device Use Unlimited (do not turn on simultaneously if using same channel)
Battery Life (per device) 20 hours
Battery Life (with charging case) Up to 60 hours total
Charging Compartment Battery Capacity 3.7V/1000mAh
Transmission/Receiver Battery Capacity 3.7V/320mAh
Plug Rotation Range 210 degrees
Product Color Black
Charging Compartment Size 8 * 7.5 * 4.8 cm (3.1 * 3 * 1.9 inch)
Transmission/Receiver Size 12 * 2.8 * 1.8 cm (4.7 * 1.1 * 0.7 inch)
Charging Compartment Weight 154 g (5.4 oz)
Transmission/Receiver Weight 31 g (1.1 oz)
Batteries Included Yes

7. User Tips

  • Optimal Placement: For the best signal quality and range, try to maintain a clear line of sight between the transmitter and receiver. Avoid placing them behind large metal objects or dense walls.
  • Battery Management: Always keep the charging case charged. This allows you to quickly top up your transmitter and receiver between sets or during breaks, ensuring you never run out of power unexpectedly.
  • Channel Awareness: While the system supports multiple units, be mindful of other 2.4GHz devices in your environment (Wi-Fi routers, other wireless systems) that might cause interference. If using multiple WS-mini2 pairs, power them on sequentially to help them establish distinct channels.
  • Adapter Use: When using the 3.5mm adapter, ensure it is securely threaded onto the 6.35mm plug to maintain a stable connection and prevent signal loss.

8. Warranty and Support

For any questions, technical support, or warranty inquiries regarding your Miwayer WS-mini2 Wireless Guitar System, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.