1. Introduction
The DAREU A3 Pro Over-ear Headphones are designed to provide an immersive and clear audio experience for gaming and communication. Featuring four-mode wireless connectivity, ENC noise-cancelling microphone, long battery life, and low latency, these headphones are built for extended and high-performance use.

2. Key Features
- Immersive Panoramic Game Audio: Paired with DAREU’s custom chip for a detailed battlefield soundscape.
- Ultra-Low Latency Wireless: Approximately 10ms latency for perfect audio-video synchronization.
- Lightweight Design: Approximately 270g with a manganese steel frame for comfort during long gaming sessions.
- 53mm Esports-Grade Drivers: Reproduce every detail of the battlefield.
- Long-Lasting Battery: 1500mAh battery delivers over 100 hours in Bluetooth mode and 80 hours in 2.4G mode.
- ENC Noise-Cancelling Microphone: Ensures clear team communication by filtering ambient noise.
- Precision Spatial Audio: Upgraded algorithms for enemy direction detection with error within 5 degrees.

3. Setup and Connection
3.1 Package Contents
Before starting, ensure all items are present in the package:
- 1 x DAREU A3 Pro Headset
- 1 x Wireless Receiver (USB-A and Type-C dual-port)
- 1 x Data Cable (USB-C to USB-A)
- 1 x Detachable Microphone
- 1 x User Manual (this document)
- 1 x Gift Box
3.2 Connecting the Headset
The DAREU A3 Pro supports three connection modes: 2.4G Wireless, Bluetooth, and Wired.
3.2.1 2.4G Wireless Mode
- Locate the wireless receiver, which is a dual-port USB-A and Type-C dongle.
- Plug the appropriate end of the receiver (USB-A or Type-C) into your PC, mobile phone, or console.
- Turn on the headset. The headset should automatically connect to the receiver.
- Ensure the headset is in 2.4G mode if there is a mode switch.

3.2.2 Bluetooth Mode
- Turn on the headset and switch it to Bluetooth mode (if applicable).
- On your device (PC, mobile, console), go to Bluetooth settings and search for available devices.
- Select "DAREU A3 Pro" from the list to pair.
3.2.3 Wired Mode
- Connect the provided USB-C to USB-A data cable to the headset and your device.
- The headset will operate in wired mode, and charging will also commence.
3.3 Attaching the Microphone
The microphone is detachable. Align the microphone connector with the port on the headset and gently push until it clicks into place. Ensure it is securely attached for clear communication.
4. Operation
4.1 Controls
The DAREU A3 Pro features intuitive controls for ease of use:
- Power Button: Used to turn the headset on/off and switch between modes.
- Microphone Button: Toggles the microphone on/off (mute/unmute).
- Volume Wheel: Adjusts the audio volume up or down.
4.2 ENC Noise-Cancelling Microphone
The Environmental Noise Cancelling (ENC) microphone accurately filters ambient noise, ensuring your voice is transmitted clearly to your teammates. This is crucial for tactical communication in gaming environments.

4.3 Spatial Audio and Auditory Intelligence
The headset's advanced algorithms enhance vertical positioning and precise footstep detection, providing a competitive edge in games. This allows for accurate enemy location identification in complex environments.

4.4 Custom Driver Software
For advanced customization, DAREU provides self-developed custom driver software. This software allows you to:
- Adjust headphone volume amplification.
- Utilize a graphic equalizer for personalized sound profiles.
- Select from preset effects for music, video, and popular games (e.g., CSGO, PUBG).
- Configure microphone settings, including monitoring and automatic gain.

5. Maintenance and Charging
5.1 Charging the Headset
The DAREU A3 Pro is equipped with a 1500mAh lithium battery. To charge:
- Connect the headset to a power source using the provided USB-C data cable.
- It is recommended to charge the headset via a computer's USB port or a standard 5V/1A USB charger.
- Avoid using low-quality, non-standard, overvoltage, or overcurrent power adapters.
- Keep the headset away from high-temperature devices while charging.
- If the headset will not be in use for a long time, turn off the power switch.
5.2 Battery Status Indication
- Red light blinking: Please charge promptly.
- Red light solid: Charging in progress.
- Green light solid: Charging completed.

5.3 Cleaning
To clean your headset, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials. Do not immerse the headset in water.
6. Troubleshooting
6.1 Connection Issues
- No connection in 2.4G mode: Ensure the wireless receiver is properly plugged in and the headset is in 2.4G mode. Try replugging the receiver or restarting the headset.
- Bluetooth pairing failure: Ensure the headset is in Bluetooth pairing mode and visible to other devices. Forget the device on your host device and try pairing again.
- Audio cutting out or unstable: Check for interference from other wireless devices. Ensure the headset is within the effective transmission range (up to 20 meters for 2.4G wireless).
6.2 Microphone Not Working
- Ensure the microphone is securely attached to the headset.
- Check if the microphone is muted using the microphone button on the headset.
- Verify microphone settings in your device's operating system and game/communication software.
6.3 FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes may invalidate your device access rights.
7. Specifications
| Feature | Specification |
|---|---|
| Connection Type | 2.4G Dual-Port + Bluetooth + Wired |
| Headphone Jack | USB + Type-C |
| Frequency Response | 20Hz ~ 20KHz |
| Driver Unit | Φ53mm |
| Horn Impedance | 24 ± 15% Ω |
| Microphone Sensitivity | -42 ± 3dB |
| Buttons | Power button, Microphone button, Volume wheel |
| Cable Length | 2 meters |
| Product Dimensions | 145 × 97 × 195mm (±5mm) |
| Weight | 270 ± 5 grams |
| Battery Capacity | 1500mAh Lithium Battery |
| Battery Life (Bluetooth) | Approx. 100+ hours |
| Battery Life (2.4G) | Approx. 80 hours |
| Material | Plastic, Manganese steel frame headband |
| Active Noise-Cancellation | Yes (ENC for microphone) |



8. User Tips
- Optimize Comfort: The headset features a lightweight design and adjustable headband. Take advantage of the 9-level adjustable arm and rotatable design to find the most comfortable fit for long gaming sessions.
- Maximize Battery Life: For extended use, consider using Bluetooth mode when ultra-low latency is not critical, as it offers slightly longer battery life than 2.4G mode. Remember to turn off the headset when not in use.
- Personalize Your Audio: Utilize the DAREU custom driver software to fine-tune your audio experience. Experiment with the graphic equalizer and game-specific presets to gain an advantage in different titles.
- Clear Communication: Position the detachable microphone optimally for your voice. The ENC feature will handle background noise, but good microphone placement ensures your voice is captured effectively.

9. Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the official DAREU website or contact their customer service. Keep your purchase receipt as proof of purchase for warranty claims.
A PDF version of the user manual may be available for download on the official DAREU product support page.