Introduction
Thank you for choosing the JUOVI 65W 20000mAh Portable Power Bank. This high-capacity power bank is designed to provide fast and efficient charging for a wide range of devices, including laptops, smartphones, tablets, and earbuds. With its universal compatibility and multi-protection features, it's an ideal companion for travel and daily use.
Image: JUOVI 65W 20000mAh Power Bank (Black)
Video: Product demonstration showing the power bank charging various devices like phones, earbuds, and laptops.
Package Contents
Please check the box for the following items:
- 1x JUOVI 65W 20000mAh Power Bank
- 1x 3A Type-C to Type-C Charging Cable (30 cm)
- 1x Instruction Manual
Image: Package contents including the power bank, charging cable, and manual.
Product Overview
The JUOVI Power Bank features a sleek design with a digital display for battery percentage and multiple ports for versatile charging.
Image: Close-up of the power bank's input/output ports.
Ports:
- Type-C1 (IN/OUT): Supports both input and output, up to 65W output and 45W input.
- Type-C2 (IN/OUT): Supports both input and output, up to 65W output and 45W input.
- USB-A1 (OUT): Output only, up to 18W.
- USB-A2 (OUT): Output only, up to 18W.
The digital display shows the current battery percentage, allowing you to monitor the power bank's charge level at a glance.
Setup and Initial Use
Charging the Power Bank
- Connect the provided Type-C to Type-C charging cable to one of the Type-C (IN/OUT) ports on the power bank.
- Connect the other end of the cable to a compatible USB-C wall charger (not included) with at least 45W output for optimal charging speed.
- The digital display will show the charging progress. The power bank is fully charged when the display shows 100%.
For optimal battery calibration, it is recommended to fully charge and discharge the power bank periodically.
Operating Instructions
Charging Your Devices
- Connect your device's charging cable to the appropriate output port (Type-C or USB-A) on the power bank.
- Connect the other end of the cable to your device.
- The power bank will automatically begin charging your device. The digital display will show the remaining battery percentage.
- To check the battery level, short press the power button. If no output is detected within 5 seconds, the power bank will automatically enter sleep mode to conserve power.
Image: Fast charging of 4 devices simultaneously.
Image: Port output details. For safety, charging multiple devices at once automatically reduces power per port and slows charging. For maximum speed, it is recommended to charge only one device at a time.
Trickle Charging Mode (Low-Current Mode)
This mode is ideal for charging low-power devices such as Bluetooth earphones or smartwatches.
- Ensure the power bank is powered on and in an output state.
- Double-press the power button to enable low-current mode. The display's single digit will cycle every 5 seconds to indicate this mode.
- Connect your low-power device. The power bank will provide continuous low-current output for 2 hours without shutting down.
- To exit low-current mode, double-press and hold the power button.
Maintenance
- Store the product in a cool and dry place.
- Do not store the product in hot or humid environments.
- If the product is not used for long periods, charge and discharge it once every three months to maintain battery health.
- Clean the product with a soft, dry cloth. Do not use harmful chemicals or detergents.
- Avoid misuse, dropping, or applying excessive force, as this may cause product damage.
Troubleshooting
Power Bank Gets Warm During Charging/Discharging
It is normal for the power bank to generate some heat when charging a device, especially when delivering high power (e.g., 65W to a laptop) or when the connected device's battery is very low. This is a normal operating condition and not a cause for concern.
Device Not Fast Charging
- Ensure your mobile phone or device supports fast charging protocols (PD, QC, PPS, FCP, SCP).
- Verify that you are using a fast-charging compatible cable. Not all cables support high wattage.
- Check the power bank's output specifications for the port you are using. Some ports may have lower maximum outputs.
- If charging multiple devices, the total output power is shared, which may reduce individual device charging speeds. For maximum speed, charge one device at a time.
- If the issue persists, try a different cable or contact customer service with your device model for compatibility checks.
Perceived Lower Capacity Than Advertised
The advertised capacity (20000mAh) refers to the battery cell capacity. The 'rated capacity' or actual usable output capacity is always lower due to energy loss during the voltage conversion process within the power bank's circuit. This conversion efficiency is typically around 75-85%. Therefore, a 20000mAh power bank will not deliver a full 20000mAh to your device. For example, a 20000mAh (74Wh) power bank with 75% efficiency would deliver approximately 15000mAh (55.5Wh) of usable power. Factors like cable quality, device battery health, and ambient temperature can also affect the actual delivered capacity.
Flickering Lights or Incorrect Voltage Output
If you experience flickering lights on the display or suspect incorrect voltage output (e.g., 5V then suddenly 8V when expecting 20V), this could indicate a faulty unit or an incompatible charging negotiation with your device. Immediately disconnect your device. Try using a different cable and charging a different device to isolate the problem. If the issue persists, discontinue use and contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Product Name | JUOVI 65W Power Bank |
| Battery Type | Lithium battery |
| Battery Capacity | 20000mAh (74Wh) |
| Max Output | 65W |
| Energy Conversion Rate | >75% |
| Type-C1/C2 Input | 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=2.25A (45W Max) |
| Type-C1/C2 Output | 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3.25A (65W Max) |
| USB-A1/A2 Output | 5V=3A, 9V=2A, 12V=1.5A (18W Max) |
| PPS Support | 3.3V-21V=3.25A |
| Features | Digital Display, Two-way Quick Charge |
| Shell Material | Plastic |
| Product Dimensions | 137 x 70 x 26.3 mm |
| Product Weight | Approx. 400g |
| Origin | Mainland China |
Image: Product dimensions comparison.
User Tips
- The power bank often arrives with a partial charge (e.g., 78%). It's ready for immediate use, but a full charge before first use is recommended for optimal battery calibration.
- When charging laptops, the power bank may become warm, which is normal due to the high 65W output.
- For fast charging, ensure your device and charging cable are compatible with PD, QC, or other supported fast-charging protocols.
- The power bank is airline-approved, making it suitable for travel.
Important Safety Instructions and Warnings
Please follow these basic precautions when using this product to prevent fire, electric shock, damage, or injury:
- Store the product in a cool and dry place.
- Do not store the product in hot or humid environments.
- Only use power supplies or chargers recommended or sold by the product manufacturer. Using incompatible accessories may result in fire or injury.
- Operating temperature should be between 10℃ and 45℃.
- Do not disassemble the product. If service or repair is required, take it to a qualified service person. Incorrect reassembly can lead to fire or injury.
- If the product is not used for long periods, charge and discharge it once every three months.
- When charging a device, the product may feel warm; this is a normal operating condition and should not be cause for concern.
- Under normal conditions, battery performance will decline over several years.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Avoid misuse, dropping, or applying excessive force, as this may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
Disposal Warning:
It is strictly forbidden to dispose of this equipment with ordinary trash. It must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash. It must be delivered to a recycling center that is capable of recycling electromechanical and electrical equipment.
Certifications
This product complies with the following certifications and standards:
- CE: Complies with the provisions of Directive 2014/30/EU.
- FCC: Complies with Part 15 of the FCC Rules.
- RoHS: Restriction of Hazardous Substances.
- UL: Underwriters Laboratories.
- WEEE: Waste Electrical and Electronic Equipment.
- PSE: Product Safety Electrical Appliance and Material.
ISED Canada Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
NRCan Statement: This device has been tested with standards 10 CFR PT430, part B - App, Uniform Test Method for Measuring the Energy Consumption of Battery Charging Systems and Interruptible Power Supplies (CSA C381.2-2017).
Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Please provide your product model (J7931) and purchase details when seeking support.
You can find more information and contact details on the official website: www.juovipower.com or service@juovipower.com.