1. Product Introduction
The INSE Y50S is a cordless robotic pool cleaner designed for efficient and hassle-free maintenance of your swimming pool. It features a powerful 110W motor and a high-capacity 5100mAh rechargeable lithium battery, providing up to 130 minutes of runtime. With its intelligent route planning and four versatile cleaning modes, the Y50S ensures comprehensive cleaning of your pool's floor, walls, and waterline.

Important Precautions
- Read the user manual carefully before operation.
- The device contains a lithium battery; do not disassemble the sealed compartment without authorization. Protect the device from direct sunlight and impacts.
- Keep people and animals away from the pool when the device is in operation.
- During the off-season, charge the device once a month to protect the battery.
- Use only manufacturer-recommended or sold accessories and authorized power adapters.
- Do not allow children to ride or play with the machine.
- When charging, connect the adapter to a leak-proof and corrosion-proof socket.
- Clean the filter and the bottom shell after each use.
- Turn off the device during maintenance, cleaning, or when not in use.
- Charge the device in a cool place and do not cover it to prevent overheating.
- Only certified professionals may disassemble the sealed parts of the machine.
- If storing for a long time, charge the battery every three months to maintain 40%-60% charge.
- Do not use or store the device near heat sources.
- Do not puncture the device casing with nails or sharp objects. Do not hit or throw the device.
- This product is for indoor household use; do not use it outdoors.
- Only use the original rechargeable battery and charging station provided by the manufacturer.
- Unplug the device from the socket before cleaning or maintenance.
- Batteries in this appliance can only be replaced by qualified personnel.
2. Setup
Packing List
Ensure all the following items are included in your package:
- Pool Robot x1
- Retrieval Hook x1
- Charger x1
- User Manual x1
- User Operating Guide x1

Product Structure
Familiarize yourself with the components of your Y50S pool cleaner:
- Filter Basket Handle: For easy removal and carrying of the filter basket.
- Filter Basket Cap: Covers the filter basket.
- Filter Basket: Collects debris and dirt.
- Lid Switch: Releases the top lid for access.
- Charging Port: Where the power adapter connects for charging.
- Charging Port Lid: Protects the charging port from water.
- Upper Shell: The top cover of the unit.
- On/Off Switch / Mode Button: Controls power and cleaning modes.

3. Operating Instructions
LED Indicator
The LED indicators provide important status information:
| Status | Indicator Light |
|---|---|
| Different Modes | The blue indicator light for the corresponding mode is always on. |
| Charging | Flashing green light |
| Charging Completed | Green light keeps on |
| Low Battery | Flashing red light |
| Adapter Overvoltage Protection | Red light flashes once per second |
| Adapter Low Voltage Protection | Red and green lights flash alternately |
| Motor Blocking / Short Circuit / Overcurrent | Red light flashes 3 times per second and goes out after 5 seconds |
On/Off and Mode Switching
- Power On: Press and hold the power button. The green battery indicator and the blue mode light will illuminate after a beep, indicating the machine is powered on.
- Power Off: Press and hold the power button until the indicator light turns off. The machine will shut down, and all motors will stop working.
- Mode Switching: Short press the power button to cycle through different cleaning modes. The blue indicator for the selected mode will remain on.

Cleaning Modes
- Floor-only: Cleans only the pool floor, effectively removing settled debris.
- Wall-only: Focuses on scrubbing and cleaning the vertical walls of the pool.
- Waterline-only: Targets the waterline area, often the dirtiest part of the pool.
- All-cover: Provides total 360° coverage, cleaning the floor, walls, and waterline.


Retrieval
When cleaning is finished or the battery is low, the machine will automatically park near the edge of the pool. To retrieve the cleaner:
- Extend the retrieval hook (attachable to a standard pool pole) downwards.
- Hook the machine and lift it out of the water.

Caution
Always place the bottom of the machine towards the bottom of the swimming pool or remove it from the pool to avoid any possible scratches to the pool surface.
4. Maintenance
Cleaning the Filter Basket
Regular cleaning of the filter basket is crucial for optimal performance:
- Open the lid by lifting the lid switch.
- Take out the filter basket from the machine using its handle.
- Open the cap of the basket to empty the trash and flush the filter basket thoroughly with water.
- Re-assemble the filter basket back into the machine.

Charging
To charge your Y50S pool cleaner:
- Turn the charging knob counterclockwise to open the charging port lid.
- Plug the adapter into the charging port. The LED indicator will show a flashing green light during charging.
- Once fully charged (green light stays on), unplug the adapter upwards and tighten the charging port lid clockwise.
Note:
- Please clean the charging pin and ensure the charging port is completely dry before charging to prevent damage.

Storage
If the pool cleaner will not be in use for an extended period, follow these storage steps:
- Make sure that no water is left in the pool cleaner.
- Thoroughly clean the filter basket and put it back into place.
- Store the pool cleaner in a protected area out of direct sun/rain/frost at a temperature of between 32°F-104°F (0°C-40°C).
- Charge the pool cleaner once per month to protect the battery.
5. Troubleshooting and FAQ
If you encounter any issues, refer to the solutions below. If the problem persists, please contact customer support at help@poolrobot.vip.
Common Issues and Solutions
- Q: Why doesn't the pool cleaner respond after turning on the machine?
- A: The battery may be depleted after a long period of delivery or storage. Please charge the machine until the green light is solid.
- Q: Why can't it climb the wall?
- A1: Ensure you have selected the correct mode (Wall-only, Waterline-only, or All-cover Mode).
A2: The filter basket might be full of garbage or debris. Remove and clean it to restore full suction power. - Q: Why does the pool cleaner fall when cleaning the waterline instead of moving along the wall?
- A: If it's an infinity pool or a pool with a protruding edge near the waterline, the cleaner may fall easily as it cannot perfectly adhere to the wall.
- Q: Why does the pool cleaner just sit at the bottom of the pool and not move or move slowly?
- A1: It may be caught in the drain outlet on the floor. It will attempt to float free. If it remains stuck for several minutes, use a pool pole to assist.
A2: It might have sucked up a lot of debris in a very short time if placed in a dirty pool. Check and clean the filters if needed. - Q: Why does the front part float while the rear part stays on the floor?
- A: This is an intelligent feature designed to help the pool cleaner break free from being stuck.
- Q: Why can't the cleaner clean the wall or waterline in All-cover Mode?
- A: It might have sucked up too much debris in the filter basket, which weakens its movement power.
- Q: Why are there some water droplets inside a newly purchased machine?
- A: Every machine undergoes rigorous underwater testing before leaving the factory. A small amount of residual water is normal and does not affect performance.
- Q: Why does the red light flash once per second or alternately flash red and green light?
- A: Please ensure you are using the original adapter for charging.
- Q: Why does the red light flash three times per second and go out after five seconds?
- A: Rollers or belts may be jammed. Check and clean them.
- Q: Is it suitable for salt water?
- A: The product specifications do not explicitly mention salt water compatibility. Please refer to the 'Pool Water PH Value' specification (7.0-7.4) and consult customer support for specific guidance on salt water pools.
6. Specifications
Detailed specifications for the INSE Y50S Cordless Robotic Pool Cleaner:
| Attribute | Value |
|---|---|
| Model | Y50S |
| Power Source | Rechargeable battery |
| Rated Working Voltage | DC 25.2V |
| Power / Motor | 110W High-Efficiency Dual Drive Motor |
| Charger Input | AC 100-240V, 50-60Hz 0.8A |
| Charger Output | DC 29.4V/1A |
| Charging Time | 4-5 Hours |
| Battery Capacity | 5100mAh Rechargeable Lithium Battery |
| Filtration Accuracy | 180μm Fine Basket Filter (Top-access, easy to clean) |
| Waterproof Grade | IPX8 (standard safety High) |
| Pool Water Temperature | 50°F~104°F (10°C~40°C) |
| Pool Water PH Value | 7.0-7.4 |
| Suitable Pool Depth | 1.6-16.4 ft (0.5-5 meters) |
| Storage Temperature | 32°F-104°F (0°C~40°C) |
| Product Size | 430*400*218mm |
| Weight | 26.4lb |
| Operation Type | One-Button Start |
| Cleaning Coverage | Pool Floor, Walls, and Waterline (4 Smart Modes) |
| Included Accessories | Retrieval Hook, Power Adapter, Filter Basket, Manual |
7. Warranty and Support
Warranty Information
- The warranty covers 12 months from the original purchase date.
- This warranty is void if the product has been altered, misused, or repaired by unauthorized personnel.
- The warranty extends only to manufacturing defects and does not cover damage resulting from mishandling by the owner.
- For any warranty claims or repairs, the order number or proof of purchase must be presented.
Customer Support
For any questions, support, or replacement accessories, please do not hesitate to contact us:
- Email: help@poolrobot.vip
You can also refer to the official user manual PDF for more detailed instructions: View User Manual (PDF)
8. User Tips
- Pre-Season Check: Before the full pool season, test your robotic cleaner to ensure it charges and operates correctly.
- Wall Cleaning Issues: If the cleaner struggles with wall cleaning, verify the correct mode is selected and check the filter basket for debris. Excessive debris can reduce climbing power.
- Effective Floor Cleaning: The Y50S is particularly effective at floor cleaning, making it a reliable choice for removing settled dirt and leaves.
- Ease of Use: The one-button operation makes the Y50S very user-friendly and not complicated to program.
- Regular Filter Maintenance: Clean the filter basket regularly, especially after cleaning a very dirty pool, to maintain strong suction and prevent performance issues.
9. Product Video
Watch the INSE Y50S Cordless Robotic Pool Cleaner in action, demonstrating its various cleaning modes and features.