Seauto Crab Pro

Contents

Seauto Crab Pro Robotic Pool Vacuum User Manual

Model: Crab Pro (also known as SAT 30)

1. Introduction

Thank you for choosing a Seauto pool cleaner. Your Seauto pool cleaner offers reliable, convenient, and cost-effective pool cleaning. Its dependable filtration under all pool conditions, active brushing, and full-coverage climbing brush ensure maximum pool hygiene.

Seauto pool cleaners feature advanced cleaning technology and an intelligent, cordless cleaning experience with easy maintenance. You and your family can enjoy swimming with the assurance that your pool is perfectly clean.

Seauto Crab Pro Robotic Pool Cleaner in action, demonstrating its cleaning capabilities and ease of use.

2. Safety Warnings and Precautions

Read these instructions carefully and use the device accordingly. We are not liable for losses or injuries caused by improper use of the device.

  1. Ensure the device is charged before first use.
  2. Ensure the pool water depth is at least 50 cm from the top of the device for optimal cleaning performance.
  3. The device is supplied with a lithium battery. Do not disassemble the sealed casing without authorization. Protect the device from direct sunlight and impacts.
  4. Keep people and animals out of the pool while the device is in operation. Do not leave children unsupervised when using the device.
  5. Turn off the device before cleaning the filters.
  6. Charge the device once a month during the off-season to preserve battery life.
  7. Use the pool cleaner only under the following water conditions:
    • Chlorine: Max 4 PPM
    • pH-Value: 7.0 - 7.8 PPM
    • Temperature: 41-95 °F (5-35 °C)
    • NaCl: Max 5000 PPM

3. Product Structure and Components

The Seauto Crab Pro Robotic Pool Vacuum consists of the main device, a charger, a hook for retrieval, a filter basket, and a user manual.

Diagram of the Seauto Crab Pro components: Pool Cleaner, Charger, Hook, Filter Basket, User Manual.

Diagram of the Seauto Crab Pro components: Pool Cleaner, Charger, Hook, Filter Basket, User Manual.

Included Components:

  • Seauto Crab Pro Pool Cleaner
  • Charger
  • Hook (for retrieval)
  • Filter Basket
  • User Manual (PDF available for download: User Manual PDF)

4. Specifications

FeatureSpecification
Applicable Pool Size (Max)Up to 2150 sq ft (200 m²)
Supported Water Depth0.5-5 m (1.6-16.4 ft)
Charger Input100-240 VAC, 50/60 Hz
Lithium Battery Capacity22.2V / 7800 mAh
Battery Life (Runtime)Up to 180 minutes (2.5-3 hours)
Charging Time3 hours
Filter SystemFilter basket: 3.5L + 250 μm + 90 μm for regular cleaning
Moving Speed60 ft/min / 18 m/min
Dimensions (L x W x H)16.7 x 15.1 x 9.8 inches / 424.7 x 384 x 250.42 mm
Net Weight19.8 lb / 9 kg
Waterproof RatingIP68
Storage Temperature32 to 104°F (0 to 40°C)
Cleaning ModesAll-cover mode, Wall-only, Floor-only
Debris TypeLeaves, Algae, Stones, Pollen, Soil, etc.
Motor Quantity (Suction)2
Motor Power180W
Flow Rate80 GPM
FeaturesCordless, Press & Go, Auto-Dock When Low Battery, Removable Battery

5. LED Status Indicators

The LED indicator provides visual feedback on the cleaner's status:

LED ColorStatusLight Indication
BlueInitialization PhaseFlashes for 1 second
BlueIdle TimeFlashes every 3 seconds
BlueWorkingSolid
YellowDevice AbnormalFlashes for 1 second
RedLow BatteryFlashes for 1 second
RedChargingSolid
GreenFully ChargedSolid
PurpleFailure to free itself from difficultiesSolid

6. Setup and Operation

6.1. Charging

Before first use, ensure the device is fully charged. Charging should be done indoors to prevent damage to the charger, as it is not waterproof and should not be exposed to direct sunlight.

  1. Connect the device to the power supply. Charging will begin, and the LED indicator will glow solid red.
  2. Diagram showing the pool cleaner connected to its charger, with a red LED indicating charging.

    Diagram showing the pool cleaner connected to its charger, with a red LED indicating charging.

  3. The LED will glow green when fully charged and automatically turn off after 10 minutes.
  4. Diagram showing the pool cleaner fully charged, with a green LED indicator.

    Diagram showing the pool cleaner fully charged, with a green LED indicator.

6.2. Placement in Pool

The Seauto Crab Pro features an 'All-cover mode' which automatically cleans the entire pool, including walls and floor, once activated.

  1. Press the button on the cleaner to turn it on. A blue light will flash, and it will announce: "Welcome to Seauto Pool Cleaning Robot. I am ready for work."
  2. Place the device in the pool, ensuring the water surface is above the top of the cleaner for proper operation. The LED indicator will glow solid blue when the device begins cleaning the pool.
  3. Illustration of placing the Seauto Crab Pro into the swimming pool.

    Illustration of placing the Seauto Crab Pro into the swimming pool.

6.3. Cleaning Modes and Smart Control

The Seauto Crab Pro offers three versatile cleaning modes: Floor Only, Wall Only, and Wall & Floor (Full Coverage). The Wall & Floor mode is the default when the machine is turned on.

Visual representation of the three cleaning modes: Floor Only, Wall Only, and Wall & Floor.

Visual representation of the three cleaning modes: Floor Only, Wall Only, and Wall & Floor.

To switch between modes, simply press the power button on the cleaner. When a mode is selected, an audible signal will indicate the current mode.

For advanced control, download the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.